Ported throttle body and AFE
10-17-2018, 06:37 PM
#1
Burning Brakes
Thread Starter
Ported throttle body and AFE
Guys, don’t beat me up for asking a redundant question but I just picked up an AFE cold air kit and a ported throttle body for my 15 Z06. I’ve heard stories and nightmares about adding these 2 mods at the same time and getting a service engine light. Most of the stories have been from 17-19 Z owners that say engine light is on after the install. Im asking for real world experience of guys with 2015 Z’s........ If you installed these 2 mods at the same time on a 15 Z06 did you have any issues? Thanks in advance for any info you can give!
Last edited by 98ramair; 10-17-2018 at 09:36 PM.
10-17-2018, 09:35 PM
#3
Burning Brakes
Thread Starter
Thanks for the input! I’m installing tomorrow and figured I’d do both at the same time but some guys say install one at the time to avoid engine light.
10-17-2018, 10:14 PM
#4
Pop the hood then let car go to sleep before unplugging the MAF. Other than that you should be good.
10-17-2018, 11:12 PM
#5
Drifting
Did the Haltech and Katech ported TB on my 16 as the first mods. No lights at all and that included runs in excess of 150 on the runways. Good luck and have fun.