When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had these on my 2013 Mustang and they've been my favorite wheel by far. Unfortunately they don't come in a 20x12, so I can't get them for the vette, but I'm looking for something like this.
What about something where you get Performance and looks.
Vossen has the VWS-3 in a 20x10.5+32 front & 20x12+50 rear with 54mm front & rear lip.
Ok Those are pretty sick, and if the rear could have as deep a lip as that bottom, pic, then I'm all about it. I even really like the anthracite/gunmetal/titanium face with the gloss black lip!
Yup the offsets suck. You would think that with the wide body especially the rear you'd be able to pull off some big ole lips or concavity but nope! The rotors stick out way toon much so it defeats that purpose. You might pull off a baby 2 to 3 inch lip in the rear but the fronts are fckd. This is as good as its gunna get.
I don't know how much of a difference it makes, but I run 18x11 and 18x11.5" fronts and they fit great.
Well those are 2 inches shorter. I was just told, when I was speaking with one of the wheel shop folks, that a 20x10.5 was too wide. I do know people have rubbing with a 285/30/20, but can get away with a 285/25/20. I think a 285/25/20 might be a stretch on a 10.5 wheel because of how low the profile is. Needs a 10 inch rim.
Originally Posted by PureSwank
Yup the offsets suck. You would think that with the wide body especially the rear you'd be able to pull off some big ole lips or concavity but nope! The rotors stick out way toon much so it defeats that purpose. You might pull off a baby 2 to 3 inch lip in the rear but the fronts are fckd. This is as good as its gunna get.
Yeah I'm definitely not worried about the front. I want to keep the front flush mostly. Only want the lip or concave in the rear.
Yup the offsets suck. You would think that with the wide body especially the rear you'd be able to pull off some big ole lips or concavity but nope! The rotors stick out way toon much so it defeats that purpose. You might pull off a baby 2 to 3 inch lip in the rear but the fronts are fckd. This is as good as its gunna get.
is this your car? What wheels are they? They look like BC
11-09-2018, 03:04 PM
