Adding Stage 3 aero-2019 ZO6
#1
Instructor
Thread Starter
Adding Stage 3 aero-2019 ZO6
i am buying a 2019 Z and have been talking to the dealer about adding all the aero. They gave me a price of $6100 or $3850 without the side skirts. I can install all of this but if this is a good deal I would rather let them. What do you guys think? Is the GM parts the way to go? Is there a better deal? By the way this is for the exposed carbon. Thank you for any help you can provide.
#3
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,999
Received 2,681 Likes
on
1,482 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
i am buying a 2019 Z and have been talking to the dealer about adding all the aero. They gave me a price of $6100 or $3850 without the side skirts. I can install all of this but if this is a good deal I would rather let them. What do you guys think? Is the GM parts the way to go? Is there a better deal? By the way this is for the exposed carbon. Thank you for any help you can provide.
If you order the Z07 Package, you are forced to order the Stage 2 Ground Effects package, but you then also get the Stage 3 front winglets and the clear rear spoiler wicker bill.
#4
Instructor
Thread Starter
Thanks. That is the info I am looking for. What would your recommend?
#5
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,999
Received 2,681 Likes
on
1,482 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
Since I purchased the Z07 performance option package, I was forced to purchase the Stage II aero from GM. I chose the Carbon Flash option as pictured below.
If you choose to purchase aftermarket, I have read great things about Forum vendor ACS. I have provided their link as well as a link to the Chevrolet Build It configuration site. That will explain your GM options. Good luck.
ACS Composite:
https://acscomposite.com/collections...-2015-2019-z06
GM Build-IT Configuration Site:
https://www.chevrolet.com/performanc...z06-sports-car
If you choose to purchase aftermarket, I have read great things about Forum vendor ACS. I have provided their link as well as a link to the Chevrolet Build It configuration site. That will explain your GM options. Good luck.
ACS Composite:
https://acscomposite.com/collections...-2015-2019-z06
GM Build-IT Configuration Site:
https://www.chevrolet.com/performanc...z06-sports-car
The following users liked this post:
Rctreece (01-23-2019)
#6
Instructor
Thread Starter
Thanks. I was wanting the carbon fiber look and I don’t think ACS provides that. I helped install ACS aero on my buddies 2017 vert and it looked good but it was black. Anybody except GM sell the visible version?
#7
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,999
Received 2,681 Likes
on
1,482 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
TKO Performance:
https://www.tkoperformance.com/Match...r-_c_5295.html
Caravaggio Corvettes:
https://www.caravaggiocorvettes.com/c7-z06
The following users liked this post:
Rctreece (01-23-2019)
#8
Instructor
Thread Starter
Thanks. I got the dealer to come off another $500. So that would make it $5600 for stage 3 installed. I am trying to get pricing from two other dealers but they must be busy today
The following users liked this post:
Vegas1500 (01-21-2019)
#10
Instructor
Thread Starter
just adding the apr splitter, wing and side skirts is $4400 plus installation so it’s not really that much difference but thanks
#11
Melting Slicks
Where's the cheapest place to get the OEM wicker bill and stage 3 front winglets or canards. The taller ones. If I went aftermarket stage 3 front winglets does the carbon flash match the OEM carbon flash stage 2 splitter [ that's what I already have ]
Last edited by mdolandese; 01-22-2019 at 08:27 PM.
#14
Melting Slicks
#15
#16
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,094
Received 8,928 Likes
on
5,333 Posts
How much without installation? The front splitter and Stage 3 end caps are just bolt on parts requiring some torx drivers. The side skirts aren't that bad either requiring drilling holes and installing rivets to hold the skirts in place. The rear Stage 2 spoiler is a little more difficult because you need to make a template so you can drill the holes in the rear fascia in the right place. The Stage 3 wicker that attaches to the Stage 2 spoiler is just 4 bolts.
Any aftermarket stuff you purchase will also require installation so you need to consider that as well. See what Cultrag, GM Parts Direct and other online GM discount dealers will sell the same parts for. Call these places and talk to them to make sure you are getting exactly what you are looking for. Gene Culley the owner of Cultrag is excellent at knowing what is required and is also a forum sponsor.
Bill
Any aftermarket stuff you purchase will also require installation so you need to consider that as well. See what Cultrag, GM Parts Direct and other online GM discount dealers will sell the same parts for. Call these places and talk to them to make sure you are getting exactly what you are looking for. Gene Culley the owner of Cultrag is excellent at knowing what is required and is also a forum sponsor.
Bill
The following users liked this post:
Rctreece (01-23-2019)
The following users liked this post:
Rctreece (01-23-2019)
#18
Advanced
Go to GMPARTSCLUB.com the exposed carbon fiber ground effects are $3150 part number 84139800 that's 21.25% off of GM list price
The following users liked this post:
Rctreece (01-23-2019)
#19
Melting Slicks
How much without installation? The front splitter and Stage 3 end caps are just bolt on parts requiring some torx drivers. The side skirts aren't that bad either requiring drilling holes and installing rivets to hold the skirts in place. The rear Stage 2 spoiler is a little more difficult because you need to make a template so you can drill the holes in the rear fascia in the right place. The Stage 3 wicker that attaches to the Stage 2 spoiler is just 4 bolts.
Any aftermarket stuff you purchase will also require installation so you need to consider that as well. See what Cultrag, GM Parts Direct and other online GM discount dealers will sell the same parts for. Call these places and talk to them to make sure you are getting exactly what you are looking for. Gene Culley the owner of Cultrag is excellent at knowing what is required and is also a forum sponsor.
Bill
Any aftermarket stuff you purchase will also require installation so you need to consider that as well. See what Cultrag, GM Parts Direct and other online GM discount dealers will sell the same parts for. Call these places and talk to them to make sure you are getting exactly what you are looking for. Gene Culley the owner of Cultrag is excellent at knowing what is required and is also a forum sponsor.
Bill
#20
Instructor
Much cheaper doing it yourself.
However, I had to drill into the side skirts to mount them properly; all in all cost me around $1800 ($300 for Install from a friends shop)
Side Skirts ran $700 if i recall, splitter $500 and the spoiler $300, something around there.
Splitter Winglets aren't perfect, but I could redrill them slightly if I wanted to but don't care enough. They are all in Carbon Flash, you wouldn't be able to tell the difference though on anything.
However, I had to drill into the side skirts to mount them properly; all in all cost me around $1800 ($300 for Install from a friends shop)
Side Skirts ran $700 if i recall, splitter $500 and the spoiler $300, something around there.
Splitter Winglets aren't perfect, but I could redrill them slightly if I wanted to but don't care enough. They are all in Carbon Flash, you wouldn't be able to tell the difference though on anything.
Last edited by taylosw; 01-24-2019 at 02:00 PM.
The following users liked this post:
Rctreece (01-23-2019)