Stock LT4 s/c scream
#1
Pro
Thread Starter
Stock LT4 s/c scream
Will post video later but I've gotten my stock s/c to the point where it's louder than WOT with a catless borla x pipe and the npp fuse pulled! The tone is a much higher frequency than my wife's hellcat but it accents the exhaust nicely.
#3
Pro
Thread Starter
Yeah I know it's a tease haha. So I have the nx blower lid, mamos ported TB, BMS filter and I've pulled the rubber weather stripped seal as well as the hood liner off completely.
#4
Race Director
#5
Pro
Thread Starter
#7
Pro
Thread Starter
#8
Have you had an issues with the NX lid rubbing on the hood or problems with the hood itself due to heat/not having the liner? I am considering this mod, but not sure if I would need to buy a 2017+ hood liner.
#9
Pro
Thread Starter
I can't answer that as I have a 17' so it was a direct fit and removing the liner not only gave even more clearance but it enhance the sound a little bit more
The following users liked this post:
KCSHANER (02-15-2019)
#11
Good good liners are generally there to help put out a fire in the engine. Engine Fire starts, hood liner melts off with FR in it to distinguish the flames. Take care if removing.
Last edited by Cercone; 02-15-2019 at 02:54 PM.
#12
Pro
Thread Starter
#13
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Anyway, enjoy your car. I think the blower lid has much less sound baffling inside and has been reported to result in a marginal increase in blower whine or noise.
#14
Pro
Thread Starter
I looked inside my 17' stock lid and there's no such increase. The nx lid is very thin compared to the stock one so it can be heard at all rpms with that on.
#15
I just put the NX lid on my car. I have a 2016 and I had to get the 17+ liner. Corvettemods has a good price on them.
#16
Melting Slicks
I have a tvs2300 coming (Maggie) and I'm wondering what things I can do to increase the noise. I hear they are quiet
I'll have a veraram on it, so it should be louder, but I want to really hear it. What are the drawbacks on removing the seal behind the cowl?
Last edited by spinkick; 02-15-2019 at 04:25 PM.
#17
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Hate to do this to you, but he said that its louder than the exhaust with the xpipe and baffles open. Not that it made it louder. He was making a comparison.
I have a tvs2300 coming (Maggie) and I'm wondering what things I can do to increase the noise. I hear they are quiet
I'll have a veraram on it, so it should be louder, but I want to really hear it. What are the drawbacks on removing the seal behind the cowl?
I have a tvs2300 coming (Maggie) and I'm wondering what things I can do to increase the noise. I hear they are quiet
I'll have a veraram on it, so it should be louder, but I want to really hear it. What are the drawbacks on removing the seal behind the cowl?
The 2.3 is just as quiet inside the car as the stock blower, as an FYI.
Last edited by fleming23; 02-15-2019 at 04:32 PM.