Secondary radiator HOSES' part numbers?
The following users liked this post:
Mikec7z (03-23-2019)
#22
Melting Slicks
Thread Starter
you are the man, thank you
The following users liked this post:
Mikec7z (03-23-2019)
#24
Drifting
#25
Drifting
I think this one picture is all anyone needs to see hose routing.
The following users liked this post:
Mikec7z (03-24-2019)
#26
Melting Slicks
Thread Starter
I think this one picture is all anyone needs to see hose routing.
the world is about to find out soon how far a 1,000 bucks will go to cooling down one of these cars
What I will do is setup a web site most likely and turn a decent profit on people who aren't members here, but the people who are members here, and are aware of all these little budget savers we've figured out, i will hook them up on price with a forum code.
Technically, we can sell these at 700 a pop, and be the hero.
Last edited by Mikec7z; 03-28-2019 at 11:16 PM.
The following users liked this post:
BKorsaire (03-24-2019)
#27
Drifting
APDTY 911527 Replacement Heater Hose Connector Fitting Size 5/8 x 5/8 Fits Select 2002-2006 GM Models; Match Vehicle To Compatability Chart To Ensure Exact Fitment (Replaces 15139564)
is this the elbow needed?
is this the elbow needed?
#28
Safety Car
Member Since: Sep 2014
Location: in the country North Carolina
Posts: 4,248
Received 911 Likes
on
727 Posts
APDTY 911527 Replacement Heater Hose Connector Fitting Size 5/8 x 5/8 Fits Select 2002-2006 GM Models; Match Vehicle To Compatability Chart To Ensure Exact Fitment (Replaces 15139564) https://www.amazon.com/dp/B00CMWIN76..._9PXLCb6A3X4KY
is this the elbow needed?
is this the elbow needed?
The following users liked this post:
Mikec7z (03-28-2019)
#29
Drifting
Awesome, thanks!
Final question, what size hose is needed? Thanks
Final question, what size hose is needed? Thanks
Last edited by rico750sxi; 03-24-2019 at 09:47 AM.
The following users liked this post:
Mikec7z (03-28-2019)
The following users liked this post:
Mikec7z (03-28-2019)
#32
Drifting
I got my 90 degree plastic hose fitting for the hose from auxiliary radiator to main radiator, it appears to be 1” inside diameter. My auxiliary radiator and hard lines will be here tomorrow so I can confirm then too unless anyone knows differently?
The following users liked this post:
Mikec7z (03-28-2019)
#33
Drifting
So, I got the radiator today but it didn’t come with the plastic shroud around it. I’m going to have to try to find that somehow. The hard radiator lines are also a lot smaller than the elbow I got so I’ll have to figure something out there.
#35
Melting Slicks
Thread Starter
So, I got the radiator today but it didn’t come with the plastic shroud around it. I’m going to have to try to find that somehow. The hard radiator lines are also a lot smaller than the elbow I got so I’ll have to figure something out there.
edit, plastic is supposed to be with the cooler... i would complain, which site did you buy it from?
Last edited by Mikec7z; 03-28-2019 at 09:01 PM.
#36
Melting Slicks
Thread Starter
shot you a PM. Just realized too, the car already has the fitting now, you don't need to buy the plastic one at all.
Last edited by Mikec7z; 03-28-2019 at 09:38 PM.
#37
Melting Slicks
Thread Starter
fwiw, im running mine without the foam this past month, and i think its running cooler now. I dont think the foam is a necessary component. More air will enter the mouth of the car if more air can get in and flow out easier... so its a bit of a catch 22 paradox.
Last edited by Mikec7z; 03-30-2019 at 12:13 AM.
#38
Drifting
Hmmm... I may go that route. Now that I ordered the foam piece of course.
The following users liked this post:
Mikec7z (03-30-2019)
#40
Melting Slicks
Thread Starter
haha, too big