C7 ZR1 Fast List
#81
Supporting Vendor
CPR 5'' cold air intake, E50, tune (pcm only) 18'' drag radial DA 43xx. 88 degree air.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
#82
Melting Slicks
Thread Starter
Thanks Joe, what track was this and what date?
#83
Supporting Vendor
#84
Former Vendor
Street Car Takeover Bristol TN 4/27/19
Total Performance Racing
9.67 @ 141.95 -1.441 60ft.
9.68 @ 142.34 - 1.464 60ft.
10.07 @ 143.84 - 1.779 60ft.
A8 ZR1
Existing mods:
TPR Upper pulley
TPR Lower pulley
Chevrolet Performance Intake
Kooks Longtubes
Kooks catted x-pipe (Huge restriction with heat dissipation.)
Hybrid Gas blend (NO E50/85 etc)
Custom Tune
18" M/T ET Street SS radials
Total Performance Racing
9.67 @ 141.95 -1.441 60ft.
9.68 @ 142.34 - 1.464 60ft.
10.07 @ 143.84 - 1.779 60ft.
A8 ZR1
Existing mods:
TPR Upper pulley
TPR Lower pulley
Chevrolet Performance Intake
Kooks Longtubes
Kooks catted x-pipe (Huge restriction with heat dissipation.)
Hybrid Gas blend (NO E50/85 etc)
Custom Tune
18" M/T ET Street SS radials
Last edited by TPR; 04-30-2019 at 09:38 AM.
The following users liked this post:
keagan (05-01-2019)
#85
Melting Slicks
Thread Starter
Street Car Takeover Bristol TN 4/27/19
Total Performance Racing
9.67 @ 141.95 -1.441 60ft.
9.68 @ 142.34 - 1.464 60ft.
10.07 @ 143.84 - 1.779 60ft.
A8 ZR1
Existing mods:
TPR Upper pulley
TPR Lower pulley
Chevrolet Performance Intake
Kooks Longtubes
Kooks catted x-pipe (Huge restriction with heat dissipation.)
Hybrid Gas blend (NO E50/85 etc)
Custom Tune
18" M/T ET Street SS radials
Total Performance Racing
9.67 @ 141.95 -1.441 60ft.
9.68 @ 142.34 - 1.464 60ft.
10.07 @ 143.84 - 1.779 60ft.
A8 ZR1
Existing mods:
TPR Upper pulley
TPR Lower pulley
Chevrolet Performance Intake
Kooks Longtubes
Kooks catted x-pipe (Huge restriction with heat dissipation.)
Hybrid Gas blend (NO E50/85 etc)
Custom Tune
18" M/T ET Street SS radials
#86
Supporting Vendor
#87
Melting Slicks
Thread Starter
Crap sorry about that Joe, let me get on it. Apologies!
#88
Melting Slicks
Thread Starter
Done! Joe @ CPR updated. It's awfully quiet with the M7 and Low Wing ZR1's.
The following users liked this post:
Cordes Performance Racing (05-02-2019)
#89
Supporting Vendor
ZR1 World Record
Quickest and Fastest ZR1 in the world!
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
#90
Melting Slicks
Thread Starter
#91
Race Director
Here is my submission for a listing in the fastest all stock ZR1 list.
My car is a ZTK A8 all stock including stock tires.
The 1/4 runs were made at Zmax Dragway June 14, 2019
DA was approx 2100 ft
Best
60' 1.77
1/8 7.21 103.44 mph
1/4 11.05 130.09 mph
Just for comparison/fun I also added a pic of my 1/8 th slip from the night before at my local track Greer Dragway SC
60' 1.65
1/8 7.02 102.80 mph
I believe had the track prep been better I could have run 10.80's at Zmax as everyone was having traction issues in the first 100 feet of the track there.
All of these runs were made on 93 pump gas and 30 psi in the tires. No cooling was done other than opening the hood. No parts were removed from the car, ie engine cover.
#93
Melting Slicks
Thread Starter
Congrats gentlemen! Will update later!
The following users liked this post:
Thomasmoto (06-17-2019)
#94
Melting Slicks
Thread Starter
Updated with Thomasmoto and LMR. Pending details from LMR and hoping wfarmer post up his latest runs in here.
#95
Race Director
#96
Instructor
9.64 Mystery Pass at MIR
Track: Maryland International Raceway
Modifications: Chevrolet Performance Cold Air Intake, removed passenger seat, removed rear spoiler
Make and Model: 2019 Corvette ZR1
Time: 3:42 PM
DA: (-)540
Temperature: 52 Degrees
The following users liked this post:
DebRedZR1 (07-01-2019)
#97
Race Director
I got a new PB at Zmax Dragway in Concord, NC at the Street Car Takeover event there 06-29-2019. The mph's are off because we were index racing on 11.00 and I tried not to break out, which I did anyway on my last pass.
The DA was approx. 3200' as the temps were in the low 90's to still in the high 80's after sundown.
I'm still running completely stock. Cooling the car down seemed to really help and the track prep was good even in the heat of the day. I'm including a pic of all 4 of my ET slips. I'm car 329
I think there was at least 1 other C7 ZR1, but didn't see or hear about if they made any passes in it.
I was pleasantly surprised by the performance considering how hot and humid it was. It was brutal. My first test and tune took me 2 1/2 hours in staging to get only 1 pass before eliminations started.
My last pass of 10.915 moves me up a little on the all stock list.
Thanks,
The DA was approx. 3200' as the temps were in the low 90's to still in the high 80's after sundown.
I'm still running completely stock. Cooling the car down seemed to really help and the track prep was good even in the heat of the day. I'm including a pic of all 4 of my ET slips. I'm car 329
I think there was at least 1 other C7 ZR1, but didn't see or hear about if they made any passes in it.
I was pleasantly surprised by the performance considering how hot and humid it was. It was brutal. My first test and tune took me 2 1/2 hours in staging to get only 1 pass before eliminations started.
My last pass of 10.915 moves me up a little on the all stock list.
Thanks,
Last edited by Thomasmoto; 07-01-2019 at 02:04 PM.
#98
Melting Slicks
Thread Starter
Nice job Thomas, will update today.
The following users liked this post:
Thomasmoto (07-08-2019)
#99
Race Director
#100
Melting Slicks
Thread Starter
Updated!