Airborne!
#22
Team Owner
Some very cool shots from a guy who walks the walk!
The following users liked this post:
Poor-sha (08-05-2018)
#23
Track Rat
Thread Starter
#24
Melting Slicks
If you have a HQ version of them, feel free to email me a set as well. I would like to try my hand at editing them too.
#28
Drifting
I ran the factory Cup 2 on day 1 and the Pirelli scrubs on day 2. The airborne pictures are on the slicks, the others are on the Cup 2. It's easy to tell by the pentastar wheels.
No issues on the landing, remember this was lap after lap too and that's just the one the camera guy caught. No bottoming out and it was nice and smooth. We don't have a DSC controller yet that works in this car. I need to reach out to Mike and check in on that.
No issues on the landing, remember this was lap after lap too and that's just the one the camera guy caught. No bottoming out and it was nice and smooth. We don't have a DSC controller yet that works in this car. I need to reach out to Mike and check in on that.
I am definitely comfortable pushing the car in the slower corners like on this track. I was sliding around a lot in this session.
https://www.youtube.com/watch?v=zV3TatGZPXs
https://www.youtube.com/watch?v=zV3TatGZPXs
Does the car feel more balance or is it still pushing a bit. Looks like the latter.
#29
Track Rat
Thread Starter
#30
Drifting
Awesome Sean, I always enjoy your comments and your informed analysis. Look forward to hearing about your track experiences with the new GT3RS and even the GT2RS.
The following users liked this post:
Poor-sha (08-05-2018)
The following users liked this post:
Poor-sha (08-05-2018)
#32
Airborne.....
must be the wing
#33
She’s gettin it!
#35
Le Mans Master
+1. Amazing shots. Well done
#37
Melting Slicks
Awesome pics, looks like your having a blast
#38
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,247
Received 5,444 Likes
on
2,270 Posts
Awesome pics. Great to see what you're doing with your new ZR.
Definitely should print and hang a couple of those up.
Definitely should print and hang a couple of those up.