0DSC Sport

DSCsport was at Barber testing five GT3 cars for the upcoming IMSA race also in the group was a new ZR1. We just finished properly aligning the car and complimenting the alignment with a DSC controller to tune chassis. ride height is stock and all components on the chassis and driveline is completely stock. even the alignment is close to stock. -1.8 camber front -1.4 camber rear toe front toe in .5mm per corner caster front 7.5 rear toe 1.7mm per corner caster .75 positive. alot of detail was paid to ensuring the setup surface is perfectly level drivers wt in the car tires at 30psi
The Results car puts down power like mad no drama New Track record for a stock car at Barber set By ZR1 DSCsport Mike Skeen tires were on the cord we revised the DSC mapping lightly and adding new tires next
https://www.youtube.com/watch?v=EwRW...ature=youtu.be

carsnpars

Lot of awesome sauce! Nice!

Bob U

Very impressive!!!

Are you saying you set the front toe in .5mm each side or total . 5mm toe in?

Thanks

Bob U

Bump

Z06Norway

Fantastic driving :-)
But track record 1.34 ?
https://fastestlaps.com/tracks/barber-motorsports-park

?

lobsterroboto

that site isn’t lap records it’s jist lap times records are recorded based on different criteria

i.e. a NASA ST2 track records could be slower or faster than an SCCA record in a similar class

also open lapping generally doesn’t contribute to record settings. Usually a sanctioned and transponder timed competitive event (or an event specifically for a record run)

there are also over all records that many tracks maintain.