CSM Performance LLC Precision Hub Stands
The following users liked this post:
WzUpDoc (04-13-2019)
#3
Race Director
Is the red Z06 Eric Flemings' car?
#4
Former Vendor
Thread Starter
#5
Intermediate
wow....I soooooo need this set up. LOL.
Saving my pennies.
Saving my pennies.
#6
Former Vendor
Thread Starter
We want to give a shout out to all of the CorvetteForum members! You all have been vital to our success with your support and constant feedback we wouldn't be where we are today without you.
Hats off to you guys
Colton @ CSM Performance LLC
Hats off to you guys
Colton @ CSM Performance LLC
#7
Former Vendor
Thread Starter
Happy 4th Weekend!
We've released a number of updates over the past three years, engineering one of the premier alignment solutions on the market.
The Corvette Community's support has had an enormous impact on our success and we're incredibly grateful.
We've recently transitioned our product line to feature Hardcoat Anodizing as the standard option.
Hardcoat creates a surface hardness equivalent to tool steel for superior wear resistance and longevity along with high contrast aesthetics.
We've released a number of updates over the past three years, engineering one of the premier alignment solutions on the market.
The Corvette Community's support has had an enormous impact on our success and we're incredibly grateful.
We've recently transitioned our product line to feature Hardcoat Anodizing as the standard option.
Hardcoat creates a surface hardness equivalent to tool steel for superior wear resistance and longevity along with high contrast aesthetics.
#10
Former Vendor
Thread Starter
Hib,
We offer different packages depending on the customer's need. They range from Precision Hub Stands only to a full package including our Laser Alignment System, Leveling Pads, Ride Height Gauges, etc... The cost varies from a base of $6499.99 to a full package of $12999.99, with some variations depending on the vehicle.
Our website goes into depth on each package and our Instagram has a large amount of content as well.
Website: https://csmperformance.com
Instagram: https://www.instagram.com/csmperformancellc/
We offer different packages depending on the customer's need. They range from Precision Hub Stands only to a full package including our Laser Alignment System, Leveling Pads, Ride Height Gauges, etc... The cost varies from a base of $6499.99 to a full package of $12999.99, with some variations depending on the vehicle.
Our website goes into depth on each package and our Instagram has a large amount of content as well.
Website: https://csmperformance.com
Instagram: https://www.instagram.com/csmperformancellc/
#13
Pro Mechanic
Pro Mechanic
Hib,
We offer different packages depending on the customer's need. They range from Precision Hub Stands only to a full package including our Laser Alignment System, Leveling Pads, Ride Height Gauges, etc... The cost varies from a base of $6499.99 to a full package of $12999.99, with some variations depending on the vehicle.
Our website goes into depth on each package and our Instagram has a large amount of content as well.
Website: https://csmperformance.com
Instagram: https://www.instagram.com/csmperformancellc/
We offer different packages depending on the customer's need. They range from Precision Hub Stands only to a full package including our Laser Alignment System, Leveling Pads, Ride Height Gauges, etc... The cost varies from a base of $6499.99 to a full package of $12999.99, with some variations depending on the vehicle.
Our website goes into depth on each package and our Instagram has a large amount of content as well.
Website: https://csmperformance.com
Instagram: https://www.instagram.com/csmperformancellc/
With a price of somewhere between 6500 and 13000 bucks, while there are some service shop owners to are active on the CF, how many sets do you think you're going to sell to CF members who are primarily DIYs w/o that kind of money?
The following users liked this post:
ernhart333 (08-28-2023)
#14
Former Vendor
Thread Starter
Does it work to buy two of them rather than four, then do alignments with those tools for one end of the car at a time?
With a price of somewhere between 6500 and 13000 bucks, while there are some service shop owners to are active on the CF, how many sets do you think you're going to sell to CF members who are primarily DIYs w/o that kind of money?
With a price of somewhere between 6500 and 13000 bucks, while there are some service shop owners to are active on the CF, how many sets do you think you're going to sell to CF members who are primarily DIYs w/o that kind of money?
Does it work to buy two of them rather than four, then do alignments with those tools for one end of the car at a time?
With a price of somewhere between 6500 and 13000 bucks, while there are some service shop owners to are active on the CF, how many sets do you think you're going to sell to CF members who are primarily DIYs w/o that kind of money?
From a monetary perspective the system is not outside the realm of other common track focused accessories. Thing likes wheels, brake upgrade kits, etc... We've yet to have a customer come back and say it cost too much for the value that it gave them. 90% of the time we get something along the lines of "I don't know how I aligned without this, I'll never go back". Here's a link to our thread in the C8 Z06 Section with some posts by a recent customer.
https://www.corvetteforum.com/forums...ub-stands.html
Finding a balance between capabilities, accuracy, and cost is something we spend an enormous amount of time on. The last few years have made it even more difficult with costs skyrocketing in everything down to the raw materials. We lean towards making a better product that costs a bit more rather than a lesser product.
That said we did just add some more machining capabilities in-house to drive down the overall price and take on more internally. The updated cost range is $4999.99 to $11999.99. All of our Precision Hub Stands packages come in a Pelican Case. If a customer didn't want a Pelican case we could drive that cost down a bit further. Typically most folks want one to protect the tools and make transportation from track to track easy.
Hopefully that provides some insight and answers your question. I'm happy to dig into any details you'd like!
-Colton
Last edited by CSM Performance; 09-05-2023 at 06:28 AM.
#15
Former Vendor
Thread Starter
Released Early By Customer Request! Our Black Friday Sale goes live tomorrow thru Cyber Monday with 5% off all of our products. We only run one sale a year and this is it!
How do you take advantage of the sale?
- Reach out to us on here, Instagram, our website, or through the phone.
- We'll tailor a package specific to your needs with everything you need and nothing you don't.
Make alignments simple, repeatable, precise, and stress-free. The perfect time to setup for 2024
How do you take advantage of the sale?
- Reach out to us on here, Instagram, our website, or through the phone.
- We'll tailor a package specific to your needs with everything you need and nothing you don't.
Make alignments simple, repeatable, precise, and stress-free. The perfect time to setup for 2024