LG drop spindles
#1
Racer
Thread Starter
LG drop spindles
I had the LG drop spindles installed yesterday and picked up the car today. It really looks better being an inch lower with these. I also feel like I am definitely sitting lower while driving the car. The ride is no worse from the stock setup. Actually handling feels better since the LG spindles have a mono ball upper pivot point.
We are so lucky in the SF Bay area to have Abel Chevrolet and Rich Willhoff and his crew to take care of our vettes. They took great care of the car and did an outstanding job on the installation. Had the car completely realigned after the install. While it was in I also had an oil change and had them change the rear diff fluid.
Rear before
Rear after
Front before
Front after
We are so lucky in the SF Bay area to have Abel Chevrolet and Rich Willhoff and his crew to take care of our vettes. They took great care of the car and did an outstanding job on the installation. Had the car completely realigned after the install. While it was in I also had an oil change and had them change the rear diff fluid.
Rear before
Rear after
Front before
Front after
The following 5 users liked this post by RedSSR:
638HP (05-25-2019),
aaslanmd (05-25-2019),
Bigeasyvette (06-06-2019),
dee zed (06-01-2019),
HTXSkydiver (05-24-2019)
The following 2 users liked this post by HTXSkydiver:
Dane@LGmotorsports (05-31-2019),
RedSSR (06-03-2019)
#3
Premium Supporting Vendor
Awesome photo thank you for sharing and we appreciate your business!
The following users liked this post:
RedSSR (06-03-2019)
#4
My car on the left, lowered on stock bolts. My buddies car on the right has LG drop spindles. I’ve be raving about how much better my car looks lowered and then I saw his car, my car is back to looking like a truck now LOL. Looks so good slammed...
#5
Le Mans Master
Does it rub?
#9
Racer
Thread Starter
I am not having any issues but I was always careful about scraping the splitter to begin with. You just have to be aware of any situation that may be a problem. I love the look and handling of the car with the drop spindles on it.
The following 2 users liked this post by RedSSR:
duanesZ06 (06-06-2019),
orclubduck (06-06-2019)
#10
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Had LG drop spindles on my C7Z and have them on my C6 track car. The only way to properly lower the car with factory suspension.