Code name Zerv
#2
Le Mans Master
???
The following users liked this post:
vdavenp802 (06-27-2019)
#3
Burning Brakes
#4
Burning Brakes
No leaf springs?
#6
Burning Brakes
Someone report this to the magazines lol
#7
There’s know way to know but the account who posted this has no other posts and is actually named ZERV. So there’s a few possibilities: 1. A Corvette engineer is going to lose their job. 2. A Corvette engineer is getting a good laugh out of this. 3. These CAD files are fake or from a different car. 4. They really are creating buzz for a NAIAS debut. 5.These CAD files were being used in a presentation to dealers, higher-ups, or other important GM employees
#9
*edit* Here's a link to the images. I saved them this morning as soon as I saw them.
*edit again* GM must really not want this stuff online. My imgur album was deleted by someone other than me. Nice try GM, but I have the originals I downloaded from the OP.
https://imgur.com/gallery/H1gyL
These are straight up CAD images from the mid-engine car. This is your C8, people.
Somebody is gonna get so fired over this. Give it 2 hours, this will be all over Jalopnik, Autoblog, and others.
From the images:
-Coil springs (FINALLY).
-Magshocks (or spool valve, either way, fancy shocks).
-Upper front arms look to be similar to C5/6/7 with trunions.
-Lower front arms look to be similar to C5/6/7 with camber eccentrics.
-Rear subframe is HUGE and is a very strange mix of cast parts and welded tube. Can't tell if it's welded or bolted together in the middle.
-Engine is an LT1.
-Looks like factory shorty headers instead of cast manifolds.
-Engine has alternator relocated.
-Not sure what the upper-right accessory pulley is for. Upper left is water pump, lower right is AC.
-Oil filter looks easy to get to.
-Oil cooler clearly shown above filter.
-Half-shafts look to be the "bolt on flange" style (no draining trans to remove shafts).
-That transaxle is BEEFY. Like, dear god. Can't tell if it's auto or manual. If I had to wager, that's the automatic (guessing from shape of bottom of trans and what looks to be coolers hanging around it).
-Giant flat space above transaxle is more than likely for intake box/filter.
-No turbos shown.
-Frame looks to be similar to C5/6/7 with giant hydroformed rails (probably still aluminum). Disappointing. I was hoping for proper unibody. Hopefully with a fixed roof it'll be stiffer.
-Brake rotors are 1 piece. Calipers are MASSIVE.
-Side skirts are mechanically fastened just like C5/6/7. Still going to be horrendously expensive to fix if damaged.
-Brake ducts clearly shown on front.
Guarantee that Tadge is fighting some fires right now.
Can't wait to see this thing released.
*edit again* GM must really not want this stuff online. My imgur album was deleted by someone other than me. Nice try GM, but I have the originals I downloaded from the OP.
https://imgur.com/gallery/H1gyL
These are straight up CAD images from the mid-engine car. This is your C8, people.
Somebody is gonna get so fired over this. Give it 2 hours, this will be all over Jalopnik, Autoblog, and others.
From the images:
-Coil springs (FINALLY).
-Magshocks (or spool valve, either way, fancy shocks).
-Upper front arms look to be similar to C5/6/7 with trunions.
-Lower front arms look to be similar to C5/6/7 with camber eccentrics.
-Rear subframe is HUGE and is a very strange mix of cast parts and welded tube. Can't tell if it's welded or bolted together in the middle.
-Engine is an LT1.
-Looks like factory shorty headers instead of cast manifolds.
-Engine has alternator relocated.
-Not sure what the upper-right accessory pulley is for. Upper left is water pump, lower right is AC.
-Oil filter looks easy to get to.
-Oil cooler clearly shown above filter.
-Half-shafts look to be the "bolt on flange" style (no draining trans to remove shafts).
-That transaxle is BEEFY. Like, dear god. Can't tell if it's auto or manual. If I had to wager, that's the automatic (guessing from shape of bottom of trans and what looks to be coolers hanging around it).
-Giant flat space above transaxle is more than likely for intake box/filter.
-No turbos shown.
-Frame looks to be similar to C5/6/7 with giant hydroformed rails (probably still aluminum). Disappointing. I was hoping for proper unibody. Hopefully with a fixed roof it'll be stiffer.
-Brake rotors are 1 piece. Calipers are MASSIVE.
-Side skirts are mechanically fastened just like C5/6/7. Still going to be horrendously expensive to fix if damaged.
-Brake ducts clearly shown on front.
Guarantee that Tadge is fighting some fires right now.
Can't wait to see this thing released.
Last edited by firebirdfan; 12-14-2017 at 04:32 PM.
The following 25 users liked this post by firebirdfan:
-vet (12-14-2017),
235265283... (12-15-2017),
68roadster (12-14-2017),
7t3shark (06-27-2019),
bluman (02-01-2018),
and 20 others liked this post.
#11
Safety Car
These are straight up CAD images from the mid-engine car. This is your C8, people.
Somebody is gonna get so fired over this. Give it 2 hours, this will be all over Jalopnik, Autoblog, and others.
From the images:
-Coil springs (FINALLY).
-Magshocks (or spool valve, either way, fancy shocks).
-Upper front arms look to be similar to C5/6/7 with trunions.
-Lower front arms look to be similar to C5/6/7 with camber eccentrics.
-Rear subframe is HUGE and is a very strange mix of cast parts and welded tube. Can't tell if it's welded or bolted together in the middle.
-Engine is an LT1.
-Looks like factory shorty headers instead of cast manifolds.
-Engine has alternator relocated.
-Not sure what the upper-right accessory pulley is for. Upper left is water pump, lower right is AC.
-Oil filter looks easy to get to.
-Oil cooler clearly shown above filter.
-Half-shafts look to be the "bolt on flange" style (no draining trans to remove shafts).
-That transaxle is BEEFY. Like, dear god. Can't tell if it's auto or manual. If I had to wager, that's the automatic (guessing from shape of bottom of trans and what looks to be coolers hanging around it).
-Giant flat space above transaxle is more than likely for intake box/filter.
-No turbos shown.
-Frame looks to be similar to C5/6/7 with giant hydroformed rails (probably still aluminum). Disppappointing. I was hoping for proper unibody. Hopefully with a fixed roof it'll be stiffer.
-Brake rotors are 1 piece. Calipers are MASSIVE.
-Side skirts are mechanically fastened just like C5/6/7. Still going to be horrendously expensive to fix if damaged.
-Brake ducts clearly shown on front.
Guarantee that Tadge is fighting some fires right now.
Can't wait to see this thing released.
Somebody is gonna get so fired over this. Give it 2 hours, this will be all over Jalopnik, Autoblog, and others.
From the images:
-Coil springs (FINALLY).
-Magshocks (or spool valve, either way, fancy shocks).
-Upper front arms look to be similar to C5/6/7 with trunions.
-Lower front arms look to be similar to C5/6/7 with camber eccentrics.
-Rear subframe is HUGE and is a very strange mix of cast parts and welded tube. Can't tell if it's welded or bolted together in the middle.
-Engine is an LT1.
-Looks like factory shorty headers instead of cast manifolds.
-Engine has alternator relocated.
-Not sure what the upper-right accessory pulley is for. Upper left is water pump, lower right is AC.
-Oil filter looks easy to get to.
-Oil cooler clearly shown above filter.
-Half-shafts look to be the "bolt on flange" style (no draining trans to remove shafts).
-That transaxle is BEEFY. Like, dear god. Can't tell if it's auto or manual. If I had to wager, that's the automatic (guessing from shape of bottom of trans and what looks to be coolers hanging around it).
-Giant flat space above transaxle is more than likely for intake box/filter.
-No turbos shown.
-Frame looks to be similar to C5/6/7 with giant hydroformed rails (probably still aluminum). Disppappointing. I was hoping for proper unibody. Hopefully with a fixed roof it'll be stiffer.
-Brake rotors are 1 piece. Calipers are MASSIVE.
-Side skirts are mechanically fastened just like C5/6/7. Still going to be horrendously expensive to fix if damaged.
-Brake ducts clearly shown on front.
Guarantee that Tadge is fighting some fires right now.
Can't wait to see this thing released.
#15
Are the images really gone? They're showing up for me.
If not, here's a link to an album of them:
https://imgur.com/gallery/H1gyL
If not, here's a link to an album of them:
https://imgur.com/gallery/H1gyL
Last edited by firebirdfan; 12-14-2017 at 04:28 PM. Reason: GM deleted my imgur album
The following 11 users liked this post by firebirdfan:
-vet (12-14-2017),
63Corvette (12-14-2017),
70LQ4 (01-28-2018),
daleong (12-14-2017),
dmaxx3500 (01-28-2018),
and 6 others liked this post.
#16
Le Mans Master
Oh look. Coilovers! I suspect one of the issues in attempting to retain
leafsprings is height. The ME platform allows the engine to sit lower behind the cabin. A leaf spring stack would cost at least an inch of clearance and would need to sit under the transaxle. If there are plans for active suspension or lowering as in the Ford GT, the coilovers are out of the way and there is lots of technology based on the use of coilovers.
leafsprings is height. The ME platform allows the engine to sit lower behind the cabin. A leaf spring stack would cost at least an inch of clearance and would need to sit under the transaxle. If there are plans for active suspension or lowering as in the Ford GT, the coilovers are out of the way and there is lots of technology based on the use of coilovers.
#18
Le Mans Master
#19
Burning Brakes
Lol this is already on Jalopnik and Road and Track
#20
I'm not an expert at reading CAD drawings. But can someone tell by looking at these if the transmission is at the rear? If it is, does this confirm that manual transmission will not be offered?