The scoop Is fake!
The following users liked this post:
Mike Mercury (06-17-2019)
#142
...which is why there is no 2019 Fiero !
; )
; )
The following users liked this post:
GM5778 (07-18-2019)
#143
It totally did! Drivers side only, of course.
The following 2 users liked this post by JLemke:
bbbvettes.com (06-13-2019),
firstvettesoon (06-13-2019)
#144
gotta let those 20 CCs breath !
The following users liked this post:
bbbvettes.com (06-13-2019)
#145
Ok General, I'm going to you to save some time !
Which one is closest ... if any ? asking about the scoop mostly but any hints are welcome...
Last edited by firstvettesoon; 06-13-2019 at 07:42 PM.
#146
This hit on a dealership page today C8 final?
So the scoops on the side of the new c8 look like something a fighter plane from the sixties would have. Dorky, clunky and weird. If that is the design then we are all screwed. Honestly the whole rear quarter looks like a cap to hide the reality. I found this 18 hours before the reveal on Rick Hendricks site in Virginia beach. Did somebody upload the real deal? I hadn't seen this rendering and it doesn't look like one.
Is this it?
Is this it?
The following 2 users liked this post by Christopher Titus:
7 Speed Rowing (07-18-2019),
yz250fPilot (07-18-2019)
The following users liked this post:
yz250fPilot (07-18-2019)
#149
Le Mans Master
Member Since: Dec 1999
Location: One Hour From Boston!
Posts: 6,408
Received 4,682 Likes
on
1,862 Posts
#150
#151
Safety Car
#153
...thanks for the reply.... 35 days later !
; )
The "general" shape Chazcron is showing is one of the first shapes I predicted early on based on the CAD drawings and he and Bvds agreed with and adopted.
The others I show above are ALL shapes that "eyewitnesses" claim are correct! V shaped, Exactly the Viper shape, rounded, sharp angled, bottom half covered with a black panel like the Aria car., Down to the rocker, half way down the door,, back further...... all descriptions from "eyewitnesses" ! I rendered them all so we could see the differences.
I believe the blade area is not 100% and that there must be a cover trim of some sort. The area above the scoop opening that blends to the fender top is a question in my mind. I am sure it is not as harsh and boxy as seen on the mules and Chaz' model and feel it must blend with the scalloped door/fender lines better. I also believe there will be a deep groove detail around the top edge following the shape of the scoop.
We will see in only a few hours ! ; )
; )
The "general" shape Chazcron is showing is one of the first shapes I predicted early on based on the CAD drawings and he and Bvds agreed with and adopted.
The others I show above are ALL shapes that "eyewitnesses" claim are correct! V shaped, Exactly the Viper shape, rounded, sharp angled, bottom half covered with a black panel like the Aria car., Down to the rocker, half way down the door,, back further...... all descriptions from "eyewitnesses" ! I rendered them all so we could see the differences.
I believe the blade area is not 100% and that there must be a cover trim of some sort. The area above the scoop opening that blends to the fender top is a question in my mind. I am sure it is not as harsh and boxy as seen on the mules and Chaz' model and feel it must blend with the scalloped door/fender lines better. I also believe there will be a deep groove detail around the top edge following the shape of the scoop.
We will see in only a few hours ! ; )