Let's Speculate Together......
#1
Melting Slicks
Thread Starter
Member Since: Oct 2005
Location: Hailing From The Mean Streets Of Irvine, California
Posts: 3,100
Received 4,153 Likes
on
1,314 Posts
Let's Speculate Together......
Save The Wave,
Corvette_Nut
#2
Clearly the Zora. Zora always dreamed of a Corvette that has a random appendage coming from the door, directly under the mirror.
#4
#5
Team Owner
Bad wrap whatever it is.lol.
The following users liked this post:
ZRacerLE (12-24-2021)
#7
https://www.corvetteblogger.com/2021/09/24/is-gms-new-ultium-62-kw-ev-motor-headed-for-the-c8-corvette-e-ray/"GM’s President Mark Reuss attended the 2021 Mackinac Policy Conference this week and took the occasion to show off three new motors this week that will power General Motors Ultium-based EVs, and one of them really has caught our attention.
Reuss introduced the GM-designed 180-kilowatt front-drive motor and a 255-kW rear- and front-drive motor, along with a 62-kW induction all-wheel drive assist motor.
The E-Ray will have the 495-hp LT2 V8 as its primary source of propulsion, and then our guess is that the 62-kW all-wheel drive assist motors will power the front wheels. What we don’t really know yet is whether there will be a separate motor for each wheel, or if one motor will power both front wheels."
Reuss introduced the GM-designed 180-kilowatt front-drive motor and a 255-kW rear- and front-drive motor, along with a 62-kW induction all-wheel drive assist motor.
The E-Ray will have the 495-hp LT2 V8 as its primary source of propulsion, and then our guess is that the 62-kW all-wheel drive assist motors will power the front wheels. What we don’t really know yet is whether there will be a separate motor for each wheel, or if one motor will power both front wheels."
Last edited by Kodiak Bear; 12-23-2021 at 07:43 PM.
The following users liked this post:
JerriVette (12-24-2021)
#8
or do you prefer this series of pics
https://www.corvetteblogger.com/2021...rmance-hybrid/
there's over 40 of then allegedly of the eRay in a test session in the company of an NSX
https://www.corvetteblogger.com/2021...rmance-hybrid/
there's over 40 of then allegedly of the eRay in a test session in the company of an NSX
Last edited by Kodiak Bear; 12-23-2021 at 07:43 PM.
#9
Melting Slicks
There's a hump on the rear window. Split window detail for the ZORA ? We've seen designs out of the GM design studio that clearly show a structural rib going right down the middle of the Coupe rear window. This will allow a centerline carbon fiber detail from the front hood of the car all the way over the top and to the backend, ala' Pagani and Bugatti designs.
Last edited by skank; 12-24-2021 at 10:15 AM.
#12
I think it’s the budget model with the Briggs & Stratton engine.