Parts For Sale (Canadian Events)
#2021
Instructor
Ramps etc.
I'm interested, can i give you a call to discuss?
Direct Lift solid deck for 8,000 lb 4 post lift. New cost $1,000 plus tax. Selling for $500 firm...only 18 months old.
Also pair of Race Ramps for the same lift. 48 inches long by 19 inches wide by 5 inches tall. New cost over $600...like new for $300 firm. Ramps weigh less than 15 lbs.
Also pair of Race Ramps for the same lift. 48 inches long by 19 inches wide by 5 inches tall. New cost over $600...like new for $300 firm. Ramps weigh less than 15 lbs.
The following users liked this post:
Zedder (06-28-2017)
#2022
Drifting
C7 -base or Z51 Suspension upgrade
LG sway bars and HD End links - like new
Great upgrade for base model to give the Z51 performance improvement at a fraction of the cost.
For Z51 owners these bars are larger and decrease roll substantially.
They were on my C7 Z51 for one track day, traded in car.
Like new.
Asking $500 CDN b/o
LG new price $695 USD
https://www.lgmotorsports.com/tracki...-swaybars.html
Andrew in Pickering
GTA
Great upgrade for base model to give the Z51 performance improvement at a fraction of the cost.
For Z51 owners these bars are larger and decrease roll substantially.
They were on my C7 Z51 for one track day, traded in car.
Like new.
Asking $500 CDN b/o
LG new price $695 USD
https://www.lgmotorsports.com/tracki...-swaybars.html
Andrew in Pickering
GTA
#2023
Burning Brakes
#2025
Instructor
#2026
Instructor
#2027
Instructor
#2028
BUMP.
Anyone interested? Make an offer.
Anyone interested? Make an offer.
I have a set of Goodyear Eagle F1's and Z06 repro's in C6 narrow body sizes (245/18 front and 285/19 rear)
One of the repros chrome is flaking, but there is chrome under it.
The passenger side tires are near the end, but the driver's side tires still have life left in them.
Feel free to message to check them out. I'm in N. Brampton.
Any reasonable offer accepted. Trying to get rid of them to someone who wants spares or to re-do the repro's, rather then toss them.
DM if interested.
One of the repros chrome is flaking, but there is chrome under it.
The passenger side tires are near the end, but the driver's side tires still have life left in them.
Feel free to message to check them out. I'm in N. Brampton.
Any reasonable offer accepted. Trying to get rid of them to someone who wants spares or to re-do the repro's, rather then toss them.
DM if interested.
#2029
Melting Slicks
GM rallye rims 15 x 7" for sale
I have a complete set of corvette rallye wheels available, centre caps and trim rings included in decent/ fair condition. Asking 175 or best offer
Also have a set of gm wheels that were otional on early 70's chevelles
and z28's. 15x7 asking 175 or BO.
Also have a set of gm wheels that were otional on early 70's chevelles
and z28's. 15x7 asking 175 or BO.
#2030
Melting Slicks
sold sold sold
Last of these parts left my garage today
So here it is! Located in Kingston, Ont.
EVERYTHING SOLD!
I've got a '77 and a '76, all parts. I need to move the whole package!
If you're looking for a project, this is it! PM if interested!
I can part them out, but prefer to do the whole lot.
Motivated seller!!
Thanks, Dan
EVERYTHING SOLD!
I've got a '77 and a '76, all parts. I need to move the whole package!
If you're looking for a project, this is it! PM if interested!
I can part them out, but prefer to do the whole lot.
Motivated seller!!
Thanks, Dan
#2031
Up up up! Lets get this moving.
lots of PM but no $ in my hand.
Adding another set of C6Z shocks to the list.
lots of PM but no $ in my hand.
Adding another set of C6Z shocks to the list.
C6 Z06 OEM rotors x4 75% life left - 200
C6 Z06 OEM pads 75% life left - 100
C6 Z51 front calipers w/ DRM stainless pistons-300
C6 Z51 rear calipers - 150
(Fresh rebuild on all Z51 calipers, also include mounts - VERY hard to find now)
C6 Z51 OEM rotors x4 50% life left - 100
C6 Z51 EBC Yellow Stuff pads 50% life left - 100
C6Z radiator with engine and trans oil cooler - 150
C5Z 1 piece Batwing oil pan - now looks brand new after hot tanking - 300
LS2 Fuel rail - 75
Brand new LS7 Fuel rail - 100
OEM LS7 injetors x8 - 300
Brand new OEM LS7 cam - 200
OEM used LS7 lifters (50k km) - 50
OEM LS7 brand new lifters in box - 200
LS7 stock 3/8" x 7.800 pushrods - 50
6.0/6.2 head gasket x2 OEM GM - 100
C5Z swaybars front & rear - 200
C5Z leafsprings front & rear - 300
C5Z51 swaybars front & rear - 150
C6Z shocks x4 low km, great oem upgrade - 150
Will keep adding more to list - tons of gaskets, seals, and parts left (brand new oem) not listed here YET. Just PM me your cell and I can send pictures to serious enquiries.
Prices are OBO, you help me sell more parts and I help you save.
Thank you very much.
C6 Z06 OEM pads 75% life left - 100
C6 Z51 front calipers w/ DRM stainless pistons-300
C6 Z51 rear calipers - 150
(Fresh rebuild on all Z51 calipers, also include mounts - VERY hard to find now)
C6 Z51 OEM rotors x4 50% life left - 100
C6 Z51 EBC Yellow Stuff pads 50% life left - 100
C6Z radiator with engine and trans oil cooler - 150
C5Z 1 piece Batwing oil pan - now looks brand new after hot tanking - 300
LS2 Fuel rail - 75
Brand new LS7 Fuel rail - 100
OEM LS7 injetors x8 - 300
Brand new OEM LS7 cam - 200
OEM used LS7 lifters (50k km) - 50
OEM LS7 brand new lifters in box - 200
LS7 stock 3/8" x 7.800 pushrods - 50
6.0/6.2 head gasket x2 OEM GM - 100
C5Z swaybars front & rear - 200
C5Z leafsprings front & rear - 300
C5Z51 swaybars front & rear - 150
C6Z shocks x4 low km, great oem upgrade - 150
Will keep adding more to list - tons of gaskets, seals, and parts left (brand new oem) not listed here YET. Just PM me your cell and I can send pictures to serious enquiries.
Prices are OBO, you help me sell more parts and I help you save.
Thank you very much.
#2032
Drifting
Member Since: Oct 2004
Location: Oakville ON "Real Corvettes have folding tops..."
Posts: 1,341
Likes: 0
Received 7 Likes
on
7 Posts
C6 Z51 - Rotors Calipers and Pads great for your C5 -$350
Still Available
Set of used C6 - Z51 rotors (GM cross drilled) and caliper brackets as well as C6 Calipers. These will fit on C5 as a brake upgrade. Front from 12 inch to 13 inch diameter. Bought them 2 or 3 years ago on forum and never got around to installing on my C5 which is now gone. Paid $400 then asking $350.
#2036
Instructor
FS: 6 Oil filters LS3
I have 2 of each oil filters for C6 LS3:
-2 AC Delco #PF-48-stock filter.
-2 Mobil 1 #M1-113---SOLD
-2 KN #HP-1017
$50 for all 6 or $10ea. for the Mobil1 and KN and $5ea. for AC Delco.
_Pick up Newmarket area.
-2 AC Delco #PF-48-stock filter.
-2 Mobil 1 #M1-113---SOLD
-2 KN #HP-1017
$50 for all 6 or $10ea. for the Mobil1 and KN and $5ea. for AC Delco.
_Pick up Newmarket area.
Last edited by legalins; 07-11-2017 at 06:59 PM.
#2039
Burning Brakes
#2040
Drifting
FS - C7 - base or Z51 suspension upgrade- LG sways
LG sway bars and HD End links - like new
Great upgrade for base model to give the Z51 performance improvement at a fraction of the cost.
For Z51 owners these bars are larger and decrease roll substantially.
They were on my C7 Z51 for one track day, traded in car.
Like new.
Asking $500 CDN b/o
LG new price $695 USD
https://www.lgmotorsports.com/tracki...-swaybars.html
Andrew in Pickering
GTA
Great upgrade for base model to give the Z51 performance improvement at a fraction of the cost.
For Z51 owners these bars are larger and decrease roll substantially.
They were on my C7 Z51 for one track day, traded in car.
Like new.
Asking $500 CDN b/o
LG new price $695 USD
https://www.lgmotorsports.com/tracki...-swaybars.html
Andrew in Pickering
GTA