Parts For Sale (Canadian Events)
#2221
Melting Slicks
2 sets of Gm rallye wheels for sale best offer
I have 2 sets of gm rallye wheels available...I was saving them for future projects but have gone in a different direction ( I'll be posting some pics of the restomod project soon )
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
Last edited by HiVoltge; 04-25-2018 at 05:24 PM.
#2222
CCW forged sp16a wheels 19x13 and 18x10 wheels for wide body corvettes. Z06 zr1 and grand sports.
With or without tires. No bends or curb rash.
$2000 for just the bare wheels and open to offers with tires.
With or without tires. No bends or curb rash.
$2000 for just the bare wheels and open to offers with tires.
#2223
Le Mans Master
FS. Ported throttle body
i have a Weapon X ported throttle body for sale, is genuine gm casting the Weapon X ported. Am going a different route. $300. or offer. LT1 and LT4 use the same 87mm throttle body.
SOLD
SOLD
Last edited by walleyejack; 05-13-2018 at 09:05 AM.
#2224
Advanced
These were used on a 2005 Corvette Z51, but I'm sure fit many other years. I would assume anything between 05 and 13, but please check fitment for yourself.
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
#2226
Advanced
I have 2 sets of gm rallye wheels available...I was saving them for future projects but have gone in a different direction ( I'll be posting some pics of the restomod project soon )
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
#2227
Advanced
These were used on a 2005 Corvette Z51, but I'm sure fit many other years. I would assume anything between 05 and 13, but please check fitment for yourself.
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
Enkei NT03+M in a staggered setup, with 18x9.5 fronts and 18x10.5 rears.
Tires are currently Nitto NT05s with lots of life left in them. 275/35R18 on the front and 295/35R18 on the rear. Rear tires were previously 315/30R18 and fit the wheel with no problem.
Wheels are in excellent condition and come with original centercaps and valve caps (match the wheel)
Located in Barrie, Ontario.
https://www.kijiji.ca/v-view-details...Activated=true
#2228
Advanced
All the rotors/pads you need to get a C6 Z51 Corvette ready for the road course.
Please see ad on kijiji:
https://www.kijiji.ca/v-view-details...Activated=true
$300 Or Best Offer. Please PM or message me through kijiji. Parts are currently located in Bruce county, but can be brought to Barrie Ontario area.
Please see ad on kijiji:
https://www.kijiji.ca/v-view-details...Activated=true
$300 Or Best Offer. Please PM or message me through kijiji. Parts are currently located in Bruce county, but can be brought to Barrie Ontario area.
EDIT - SOLD
Last edited by G-ForceJunkie; 06-15-2018 at 07:21 PM.
#2229
Burning Brakes
Leftover ecs parts
Hi guys, I have a brand new ECS boost a pump and C5 crank pinning kit I never used which was leftover form my supercharger install.
$250 for the Boost a pump
$50 for the pin kit
Located in Windsor but can work out shipping if necessary.
Thanks
$250 for the Boost a pump
$50 for the pin kit
Located in Windsor but can work out shipping if necessary.
Thanks
#2231
Melting Slicks
I have 2 sets of gm rallye wheels available...I was saving them for future projects but have gone in a different direction ( I'll be posting some pics of the restomod project soon )
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
Pics are attached :
15" gm corvette rallye wheels come with trim rings and centre caps
15" gm Camaro/chevelle style 5 spoke wheels come with trim rings
#2232
Racer
sold
sold
sold
Last edited by Movie Muscle; 06-11-2018 at 01:48 AM.
#2234
Pro
Hi, Looking for floor mats dark brown or black for a 78 and a drivers side seat back preferably in dark brown and a windshield wiper motor also for a 78. A set of rear window louvers would be cool and either 275 295 255 60 r 15s radial t/a if you have some lying around.I am close to Calgary. I know i can order these parts but always best to check here first, Thanks
#2237
DTE brace + Hinson Mounts + Bonus
I sold my C5 Z06 and have a few leftover parts. Everything will fit a 97 to 04 C5 Corvette with manual trans.
1) I have a DTE diff and trans brace for manual transmission. Every nut and bolt is included.
2) Hinson OEM height C5 Corvette Engine and Transmission Mounts. The Engine mounts have 0 miles, the trans mount has about 500 miles (literally) before I parted my car out and sold it. No crazy driveline vibrations etc like the pfadt/hoosier mount.
Looking to ONLY sell both as a package. As a bonus I will throw in 2 mobil 1 oil filters and a jug of Amsoil Torque-Drive trans fluid (the best fluid for C5 manual trans).
$750 firm, can meet anywhere in the GTA. Everything cost me well over $1100
1) I have a DTE diff and trans brace for manual transmission. Every nut and bolt is included.
2) Hinson OEM height C5 Corvette Engine and Transmission Mounts. The Engine mounts have 0 miles, the trans mount has about 500 miles (literally) before I parted my car out and sold it. No crazy driveline vibrations etc like the pfadt/hoosier mount.
Looking to ONLY sell both as a package. As a bonus I will throw in 2 mobil 1 oil filters and a jug of Amsoil Torque-Drive trans fluid (the best fluid for C5 manual trans).
$750 firm, can meet anywhere in the GTA. Everything cost me well over $1100
#2238
Burning Brakes
Where were you 3 years ago?
These are impossible to find used. You shouldn't have much issue selling.
These are impossible to find used. You shouldn't have much issue selling.
I sold my C5 Z06 and have a few leftover parts. Everything will fit a 97 to 04 C5 Corvette with manual trans.
1) I have a DTE diff and trans brace for manual transmission. Every nut and bolt is included.
2) Hinson OEM height C5 Corvette Engine and Transmission Mounts. The Engine mounts have 0 miles, the trans mount has about 500 miles (literally) before I parted my car out and sold it. No crazy driveline vibrations etc like the pfadt/hoosier mount.
Looking to ONLY sell both as a package. As a bonus I will throw in 2 mobil 1 oil filters and a jug of Amsoil Torque-Drive trans fluid (the best fluid for C5 manual trans).
$750 firm, can meet anywhere in the GTA. Everything cost me well over $1100
1) I have a DTE diff and trans brace for manual transmission. Every nut and bolt is included.
2) Hinson OEM height C5 Corvette Engine and Transmission Mounts. The Engine mounts have 0 miles, the trans mount has about 500 miles (literally) before I parted my car out and sold it. No crazy driveline vibrations etc like the pfadt/hoosier mount.
Looking to ONLY sell both as a package. As a bonus I will throw in 2 mobil 1 oil filters and a jug of Amsoil Torque-Drive trans fluid (the best fluid for C5 manual trans).
$750 firm, can meet anywhere in the GTA. Everything cost me well over $1100
#2239
Looking for: 2009 passenger side speaker
Hi,
I am looking for OEM passenger side speaker for my 2009 Corvette. If you have upgraded your speaker system and have the old OEM speaker let me know and how much you want for it. Thanks for your time.
I am looking for OEM passenger side speaker for my 2009 Corvette. If you have upgraded your speaker system and have the old OEM speaker let me know and how much you want for it. Thanks for your time.
#2240
Originally Posted by stephenpen
CCW forged sp16a wheels 19x13 and 18x10 wheels for wide body corvettes. Z06 zr1 and grand sports.
With or without tires. No bends or curb rash.
$2000 for just the bare wheels and open to offers with tires.
With or without tires. No bends or curb rash.
$2000 for just the bare wheels and open to offers with tires.