Ikillu

walleyejack

Am looking for winter steel rims or whatever is out there. 8Jx18 ET425x120.
thanks.

walleyejack

i can t believe there is nothing out there, been scouring the nets for days, and nothing. Odd thing is the 5x120 which Bmw and Mb uses. Gm doesn t want to make all the wheels the same bolt pattern, make more money i guess, they are all over the place in sizing.

TnRZ06

I have a set of 17x6.5 but bolt pattern is 5x110 so I guess that doesn't help. Its odd how GM has different sizes, they could have saved so much by standardizing

walleyejack

yes, just an easy cash grab for GM because people will pay them just to get them the wheels. "these are special size wheels" or some bs like that i am sure they tell the consumer.
for sure i know they use 110, 114, 120 and am sure there are other sizes also.

Apocolipse

All companies do it

jyetman

hi, where are you located I'm west of gta in Ontario

camirocz

For what diff?What year corvette were they in and was it a wide body?

Cman01

I'm selling my set of C6 GS wheels off my 09 Z06. These are the OE Grand Sport comp gray wheels (Speedline Italy, NOT replica wheels). They are in great shape however the LF wheel has a light curb rash that I touched up with my Cyber Gray touch up paint (no comp gray paint available) so it is noticeable only when you look very closely.

Front wheels are 18x9.5", rear wheels are 19x12".

They have Bridgestone Potenza REO50A RF tires on them in the factory C6 GS/Z06 sizing (275/35/18F, 325/30/19R. The tires still have decent tread on them but they are pushing about 8-9 years old so you can decide if you want to drive on them still (I would have no issue continuing to drive them) or get a set of new tires. My car is stored on stands during the winter and wheels are removed during this time so no static weight are on them during storage. Tires are still fine no cracks bulges etc etc.

front wheel

rear wheel

curb rash on LF wheel


I'm asking $1200 for the set, will include center caps and TPMS (what you see in the pics is what you get).

PM or email car_scan@hotmail.com for more info

Tony

fitzjames

Hello
Do you still have the Zr1 splitter?
Fitz
613-532-8788

Cman01

Post #2309...………………….Grand Sport wheels/tires are sold.

March

price drop now $600 for set of 4

my1970conv

C3 1968-1975 Convertible Hardtop for sale --- $700.00
Selling a 1968-1975 convertible hardtop. Good condition. No headliner. Pickup only. I am located in the Montreal area (Lachute, near Hawkesbury, ON).

C3 Hardtop weatherstripping kit (New) --- $350.00
Selling a convertible hardtop weatherstripping kit (never used). Includes 4 pieces (Header, Rear, Left Hand and Right Hand Side Rails).

If you want to purchase both the hardtop and the weatherstripping, I will sell them both for $1000.00.

my1970conv

68-70 Distributor Top Shield Cover Box and Lid (Never used) --- $100.00

For sale is a new Distributor Top Shield Cover Box and Lid. It was purchased for a 1970 Corvette small block... If memory serves me correct, it is for a 1968 to early 1970 Corvette, as it was purchased for an early 1970 I'm having restored.
I ended up getting an entire shielding kit, so I ended up with 2 distributor tops, therefore selling one of them.

Tachemaster

For Sale: Oil Cooler & Radiator from 2006 Z06
32 000 km's
good condition, removed to replace with a DeWitts unit.
$350. each.
located in central Ontario.

everest29k2k2

Winter setup - Nokian Hakkapeliitta R2 - Fronts: 245 40R18, Rear: 255 40R19 on, used successfully for 2 winters. Rims for 8 winters are the usual - Fronts: 18X8.5 +56 Rims and 19X10 +79 all with TPMS ask $200.00 Aurora ON

VETFEVER

$200 - seems very cheap?

Jackie N

withdrawn

Oilking

Hello,
I am selling this engine - I am asking $ 4500 USD - I can ship anywhere in North America - The motor will be as is but is in great condition and and runs perfectly well with no issues and is extremely powerful. The 427 was only manufactured for 3 years 1966 - 1969 and is known as the big block that thought it was a small block in that it could rev higher but had the torque of a big block.
Please see the 7:26 mark of this video where the gentlemen explains the the 1966 427
1966 427 Corvette Engine # 3869942 with original cylinder heads # 3872702

Manufactured in 1965 for the 66 model year car I purchased this motor for a project about 15 years ago but the project never happened and now I'm liquidating the previous owner of the engine told me the engine was in a corvette that came from California and was in an auto museum here in Alberta for many years.

1965 Chevrolet Big Block 427 Engine
# 3869942
Stamped: HI-PERF on block by trans mount
Stamped: HI-PERF in two additional locations
Block has GM1 in several spots in casting
Dated: I - 8 - 65 - But hard to read
Clock: Appears to be 9 O'clock position
Stamped: Either IP or JR on block portion by passenger Cylinder head but it was decked at some point so no additional data there.
Cylinder Heads - Original
# 3872702
Angle plugs
Oval ported
Dated: L-6-5 GM1

My absolute preference is to see this engine mated back with a corvette it is a very rare engine please research it if interested, I would also like to show my appreciation for members of this forum such as Lotsacubes,Critter1,Vette5311,Greg and 63Corvette for their help and guidance and patience with my questions as I am not a corvette expert but they gave me great info and were super helpful so thanks guys.

walleyejack

have a few C7 items for sale from my Corvette. all these parts are like new, no scratches, no damage.
all genuine GM parts
most of these parts have been on the car a year or less.

ZO 6 spoiler carbon flash - $700, $925 new
Zo 6 clear tail lights - $750. $1008 new
Rear window package shade - $100 - $180 new
Stock manifolds, cats, and h pipe, $500

can make local meet up if in the gta,
reasonable offers considered,

Thanks Al