Harmonic Balancer
#1
Melting Slicks
Thread Starter
Harmonic Balancer
Hi Everyone,
I need to replace my Harmonic Balancer on my C6 LS2. What aftermarket Balancer would you recommend? And where to buy it?
The car is not supercharged or tracked.
Thanks in advance for any recommendations.👍
I need to replace my Harmonic Balancer on my C6 LS2. What aftermarket Balancer would you recommend? And where to buy it?
The car is not supercharged or tracked.
Thanks in advance for any recommendations.👍
The following users liked this post:
OBSESHON Mark (04-24-2018)
The following users liked this post:
OBSESHON Mark (04-24-2018)
The following users liked this post:
OBSESHON Mark (04-24-2018)
#6
Racer
I replaced my wobbly C5 GM balancer(myself) with A $100 (approx) Powerbond OEM balancer, and ARP bolt. Not satisfied with the Powerbond, still had some wobble. If I were to do it again, I would use an ATI or the higher end Powerbond. This is a labour intensive job, not the time to scrimp on parts.
Just my 2 cents...
Last edited by Norm07; 04-24-2018 at 09:42 PM.
The following 2 users liked this post by Norm07:
OBSESHON Mark (04-24-2018),
vt65 (04-27-2018)
The following users liked this post:
OBSESHON Mark (04-24-2018)
#8
I picked out a Powerbond LS7 Race PB1503SS. It was ~$300USD from RockAuto. Saved ~$140 over an ATI.
They have good reviews, SFI rated, and looks well build. Haven't fired the engine yet, but any vibration will probably be from the TSP Stage 3.2 cam!
https://photos.app.goo.gl/u0zkbEBC9AebTArn1
They have good reviews, SFI rated, and looks well build. Haven't fired the engine yet, but any vibration will probably be from the TSP Stage 3.2 cam!
https://photos.app.goo.gl/u0zkbEBC9AebTArn1
#9
Melting Slicks
I put a PowerBond in the C5 many moons ago. No issues with it.
The following users liked this post:
OBSESHON Mark (04-27-2018)