wkasak_07Z06

Hello All,

Where does Zaino ZPC Fusion and Zaino AIO fit into the polish abrasive levels chart below?

http://thedetailinghandbook.com/Polish_Chart.aspx

I really like this chart as a reference and emailed the creator to ask to have these products added to the chart.

Thanks in Advance...

dougatl

ZPC Fusion is the more aggressive of the two, will remove swirls etc. ZAIO is a good all in one cleaner/polisher, but if you're surface is marred, ZPC will definitely do the trick with porter cable and pad and the results will be impressive.
Doug

gmblack3

ZPC would be a 4 to a 4.5.

ZAIO a 2.

cadguymark

Zaino claims AIO is a very mild abrasive

I'd say it's even less than that

agentf1

I would say ZPC is a 3.5 to 4 and Z-AIO is a 2. OF course a lot depends on what method and pad you are using it with. ZPC can be made much more abrasive but stepping up your pad or machine aggressiveness and/or misting with water etc...

bugman

I would give Z-PC fusion a 4 on that scale.
I think it is more effective than 3M 39009, but not as aggressive as 39002, so that's where I'd put it.