0EPP

http://www.exoticperformanceplus.com...Car.php?car=12

Check it out at the above link, great way to go fast is a car that is already sorted and has had a lot of publicity. Bob

0EPP

Still for sale, any offers? Bob

0EPP

Here is a good picture of the bottom of the car, so you can see what it looks like. Bob

LS1LT1

Umm, there are easier ways of showing prospective buyers the underside of a vehicle but uhh, well, that method works well too!

All four off the ground and on the bumper....very, very cool shot.

ralph

Too scarey for me.........i like to keep at least one wheel on the ground

Is that shot from Byron?

Tony B4

Here is a bump for one SICK CAMARO!!!!

0EPP

That was at Muncie Dragway. They had a wheelstand competition, so we loosened up the front a little more than we normally do. This competition was televised several months ago.

With some time dialing it in, this car should have an 8.5-8.6 1/4 mile time in it. We feel we finally have the converter dialed in. It does a 1.29 60 ft with drag radials.

Thanks! Bob

0EPP

Price is down to 22K Bob

0EPP

EPP 1999 Camaro Z28

*6.0 Iron Truck Block
*Billet Main Caps
*Callies Dragonslayer 4.0 Stroke
*Callies Compstar connecting rods
*SLP Timing Chain/Oil Pump Combination
*Diamond Pistons
*Total Seal Rings
*ARP head studs
*AFR 225/72CC heads – Tony Mamo ported
*Edelbrock Victor Jr Intake
*Intake Elbows Elbow
* Nick Williams 90mm Throttle Body
*ProThane Motor Mounts
*Scoggin-Dickey Caron Fiber Valve Covers
*MSD LS2 Spark Plug Coils
*QTP Stainless Steel Headers
*GM Oil Pan
*Edelbrock Fuel Rails
*Meziere Electric Water Pump
*S&W Chromemoly Roll Cage with extra bracing in the rear – 8.50 Certified
*S&W Window Net
*Moroso Battery Box
*Moroso Push/Pull kill Switch
*Moroso Cage Mount Switch Panel
*Moroso Breather Can
*Burkhart Manufacturing Master Brake Cylinder
*Kirkey Aluminum Seats and seat covers
*Moser M9 Fabricated Rear, 3.70 gear, Aluminum Center Section, 40 Spline Gun *Drilled/Star Flanged Axles, Rear Brace, Lower Control Arm Relocation Brackets, Black Powdercoated, Torque Arm, Transmission Crossmember, Spool, 5/8 Wheel Studs,
*Moser Adjustable Chromemoly Lower Control Arms
*BMR Xtreme Anti Roll Bar
*BMR Panhard Bar
*PST 3.5” Aluminum Driveshaft
*Hughes SFI Flexplate
*Built Powerglide Transmission
*BTE 9.00” Torque Converter
*Hurst Shifter
*B&M Transmission Cooler
*QA1 Shocks All the Way Around – Front shocks are double adjustable
*Wilwood Drag Brakes in rear
*Weld ProStar 15x10 in rear, Weld ProStar 15x.3.5 on front
*QA1 275lb Front Springs
*BMR K member for Manual Rack
*BMR/Flaming River Manual Rack
*BMR Upper and Lower A Arms
*BMR AC Delete Panel
*EPP Front Mount Intercooler Kit with Aluminum Tubing
*EPP Cog Kit
*ATI 1800 HP Air to Water Intercooler to go with the car complete with the pump
*ATI ProCharger F-1C
*ATI ProCharger Race Bypass Valve
*Aerospace Front Brakes
*Mickey Thompson 325/50R15 dot drag radials on rear, Mickey Thompson 28x7.50x15 on front
*Nasty Performance Fuel Tank
*Aeromotive Eliminator Fuel Pump
*Aeromotive Eliminator Regulator
*Earls Fuel Filters
*Earl’s -12 from tank to pump
*Earls Fittings used throughout.
*Wolfe Parachute Mount
*Simpson Parachute
*BS3 Computer System
*BEP Aluminum Radiator
*Madman “Save Your *** Bars”
*Engine Rebuilt in 2008

Chris@East Coast Supercharging

Wow, great Deal Bob, whats the build going to be for next season?