New Best 11.0 @ 131
#1
Racer
Thread Starter
New Best 11.0 @ 131
headed to Atco today to get some passes in with DRs and skinnies
previous best was a 11.6 @ 124.5
by just changing wheels ( y2k wheels Hoosier DRs and GTO spares with M&H) and some Coaching from Gary
first pass 11.53 @ 127 2.0 60'
2nd pass 11.04 @ 131.5 1.81 60' NEW BEST
3rd pass Bogged 11.19 @ 130.6 1.9x
just need more seat time
heres the slip rundown
60' 1.818
330 4.832
1/8 7.241
mph 101.26
1000 9.318
1/4 11.047
mph 131.50
Again Thanks to Gary (GARY2004Z06) for the coaching tips, it means alot!
-Brandon
A@A kit 8lbs, headers/exhaust, RST clutch
previous best was a 11.6 @ 124.5
by just changing wheels ( y2k wheels Hoosier DRs and GTO spares with M&H) and some Coaching from Gary
first pass 11.53 @ 127 2.0 60'
2nd pass 11.04 @ 131.5 1.81 60' NEW BEST
3rd pass Bogged 11.19 @ 130.6 1.9x
just need more seat time
heres the slip rundown
60' 1.818
330 4.832
1/8 7.241
mph 101.26
1000 9.318
1/4 11.047
mph 131.50
Again Thanks to Gary (GARY2004Z06) for the coaching tips, it means alot!
-Brandon
A@A kit 8lbs, headers/exhaust, RST clutch
#5
Melting Slicks
I picked up a .50 also using Hoosier Dr's plus another.10 with the Gto spares & M&H's up front . Its a cheap mod for that much et gain ( total was $1,015.00 :Hoosiers 275/40-17" Dr's $490, Z06 rims $150 in 17inch with some rash, Gto spares with M&H tires that I got for $375 here on the board). I bested in the 1.60's 60ft with these tires same as the MT Dr's I had before. I like both Dr's equally.
Last edited by dogboy; 11-30-2015 at 09:56 AM.
#6
Racer
Thread Starter
Yea I need more seat time, I know I could start going consistent 1.6s eventually
I have the Motorsport Zo6 wheels, they're heavy... I dropped 94lbs going to the drag setup and 54lbs was off the nose
I have the Motorsport Zo6 wheels, they're heavy... I dropped 94lbs going to the drag setup and 54lbs was off the nose