Mark@AMT Motorsport

We're running the only sale we do all year long starting now thru Monday night. Everything on our site is available at 15% off when you use coupon code "thanksgiving" at checkout. This is your only time to save some serious coin on big ticket items like our Spherical Bearing Kit and Full Floating Rotors, and will also yield substantial savings on Camber Kits, Spacers, Motor Mounts, and Seat Mounts.

Head to http://www.amtmotorsport.com to take advantage of the discounted pricing

We've listed some of our products below in case you may be unfamiliar with what we do. Happy Thanksgiving to everyone!


The product that launched our company fits all C5-C7 Corvettes. If your car sees serious track time with sticky tires then a camber kit is nearly required equipment. Set your alignment once and never worry about it again. Everything is USA made and guaranteed for life.

Normal price $345-$465. Now Thru Monday$293.25-$395.25. For C5 and C6 Camber kits follow this link. For C6Z/ZR1 follow this link. And for you C7 camber kits navigate yourself right here.





If you're sick of cracking solid one piece rotors after a single day on track then upgrade yourself to a set of AMT Full Floating Rotors. Rotors are DBA5000s and hats are 6061-Al floating on 17-4 PH hardened bushings that allow for both radial and axial float. We make everything except the rotors in house in the good ol' US of A from US-sourced materials. We've gone from cracking rotors in a single day to rotors that last multiple seasons of racing, TT, and HPDE. These rotors fit all C5 front calipers, C6 Base (non Z51/Z06/ZR1) fronts as well as any aftermarket caliper that uses stock size rotors. I use these front and rear with the AP Sprint kits and they're phenomenal. You'll never buy a better set of rotors for less money than during this sale.

Normal price $800. Now Thru Monday $640. For more information on these babies bring yourself right over here.




Wheel spacers can serve two effective purposes - making your wheels sit hella flush with your fenders, but more importantly they effectively lower the cars' center of gravity by widening the track of the car. Ever seen an F1 car that wasn't built as low and wide as the rules allow? Of course you haven't. Get your car wider with either .75'' or 1'' spacers. Spacers are machined from 6061-Al to less than .0005'' run out, thru pockets milled for weight savings, and black anodized and engraved for sex appeal. As always, these are made in the USA and guaranteed for life.


Normal price $230-260. Now Thru Monday $195.50-221. For more information on this product please head here.



If you're looking for slot car handling for your track-Corvette then eliminating those squishy stock bushings is required. Our kit uses the best bearing available for this application - the Radial RWT-10. My cost for bearings alone is more than the total cost of some of our competitors kits. This price includes complete service of YOUR control arms. All you need to do is send them to us. We'll remove the old bushings, glass bead blast all the arms, machine custom housings for a perfect fit in each busing location, install the bearings, install our stainless steel ears or 17-4 PH trunions, and check fitment of all parts with our in-house cradles before they ship (for free) back to you. There are nightmare tales going around of our competitors shipping control arms back that don't fit on your car. We haven't had a single fitment issue yet and if there ever is one, since we actually make all of our parts we can quickly fix any fitment issue you may have by sending you new parts free of charge. Our kit is also the only to offer a 5 Year Guarantee on bearings and a lifetime guarantee on all other parts.

Normal price $2500. Now Thru Monday $2125. Yikes. With all the work that goes into these kits it pains me just to type that out. For more information on this product please head here.



The stock Corvette motor mounts are gushy rubber pillows filled with oil. Eventually these stock mounts fail, spewing oil everywhere and allowing your motor to flop to and fro. Our mounts are significantly stiffer than stock but NVH is kept in check by isolating vibrations with a chunk of vulcanized rubber in the middle. Street name - hockey puck. We actually buy hockey pucks from our Neighbors to the North and machine them to fit in our 2 piece cups. It's a wacky process, and it works great. Again, everything made in NY, USA and guaranteed for life.

Normal price $175. Now Thru Monday $140. For more information on the Vulcan Motor Mounts please click here.



Finally we come to our newest offering- the Ultralow Seat Mount. Head room is at a premium in the Corvette especially when you add a cage and are wearing a helmet. Get your seat as low as possible with our Ultralow Mount. All bolts are flush mounted in the side brackets so there is nothing to keep your seat from being mounted right on the floor, and the captured hex design makes for much easier installation. We also machine our mounts so the side brackets sit in perfect contact with the floor mounts. You're not just sitting on a couple of bolts but an actual solid interface with all parts of the mount locking together. Is it overkill? Probably. But if we're putting our name on it then we take the extra few minutes of machining time to make it as good as it can be.

Normal price $400-465. Now Thru Monday $340-395.25. For more information on the Ultralow Seat Mount please followthis link.

That's all folks! Thanks for looking and as always please let me know if I can answer any questions.

Mark@AMT Motorsport

I freed the slaves now I'm gonna free these car parts from the slavery of high prices!

Just like John Wilkes Booth our prices are gonna sneak up behind you and blow your brains out!

Mark@AMT Motorsport

Just another 36 hours and our only sale of the year is over! Save hundreds today with our INSANE low prices! They're BANANAS! They're BONKERS!!! They're C-C-C-CRAAAAAAZZZZZYYYYY!

Seriously though thank you all for you support. I'm overwhelmingly happy with the success of the sale so far and it's all the fine members at Corvette Forum who have made this company a success in its first year.