Stock Head, Cam and Exhaust Goes 11.07
#1
Instructor
Thread Starter
Stock Head, Cam and Exhaust Goes 11.07
Went to Mason Dixon on 3/18/18 to make some test passes. The goal was 10.999 on stock exhaust but I missed my margin by .071 Car has never seen a dyno and street tuned by me. This is my build thread per say with all the details. https://www.corvetteforum.com/forums...t-be-done.html
#2
Pro
Great passes and some good driving too! I was reading your build thread what do you think about the meziere ewp, I’ve been considering it for mine, I turn pretty high rpm’s and from the dyno graphs I’ve seen it seems like the more rpm the more it benefits
#3
Instructor
Thread Starter
Love the EWP. I do a short belt mod and loose all tensioners and idler pulleys. This thing revs like a hyabusa with the clutch. Ati and mezier. My limiter is set at 7300 and it has seen 7900 on no lift shifts.
Last edited by lazerlemonta; 03-20-2018 at 11:58 PM.
#4
Pro
Damn I’m surprised it pulls that high with stock cam! Mine is cammed and I shift at 7500, yeah your clutch is pretty wild too I guess it free’s up some power, good luck getting those 10’s!
#5
Instructor
Thread Starter
I try to shift at 65-6600 but the tach is slow and I’ll hit 7-7100 on the 1-2 and 6800 on the 2-3. Thanks for the good luck!
#7
Instructor
Thread Starter
I run a 5.5” triple disc Tilton. Complete set up weighs 16 pounds. Stock TR6060, 4.10s in a stage 2 dif with a brace.
Last edited by lazerlemonta; 04-15-2018 at 04:16 PM.