Notices
Drag Racing Results, Trap Speed, Reaction Time, Driving Technique, Tips for Running the Corvette in the ¼ & 1/8 mile, Events
CF Timeslip database

CSM Performance LLC Precision Hub Stands

 
Old 08-20-2018, 03:45 PM
  #1  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default CSM Performance LLC Precision Hub Stands

PROUDLY ENGINEERED AND MADE IN THE UNITED STATES OF AMERICA

Free Shipping Included

From the start we set out to create a product to give racers a reliable, robust system to align their race car at home or even the paddock. We believe you shouldn’t need to spend a fortune to precisely align your car or even need to go to a professional shop. We worked with a team of racers, engineers, and mechanics from which we are proud to present our Precision Hub Stands. We start off by CNC machining billet 6061-T6 aluminum for all of the major components right here in the USA. Next, we utilize Made in USA hardened steel bolts , ground pivot pins, and high grade Made in USA ball rollers. This creates an extremely low friction surface for caster, camber, and toe measurements; virtually eliminating all resistance that a tire presents. Turn Plates and rolling your vehicle back and forth with every alignment change is a thing of the past! Each Precision Hub Stand is capable of supporting 1000 lbs or up to 1250 lbs depending on the selected option. Adjustable in 1/4″ radial height increments they accurately represent the tire height of almost any sports or race car in the world. Rigid mounted Toe Bars with precision length spacers allow for incredibly accurate toe measurements! With rare earth magnets on every Toe Bar you don’t have to worry about the tape measure coming off either. Using threaded feet the Hub Stands can be held in place when needed as well. When it comes to Hub Stands, no other company offers the smoothness of 8 (or 12) ball rollers, the weight capacity, or the caster/camber abilities.

If you need a different bolt pattern, height, weight requirement, or anything else you would like, send us an email or give us a call!

What’s Included:

Four (4) Precision Hub Stands adjustable from ~23.00″ to ~31.00″
Four (4) 24” Toe Bars with spacers and attached magnets

Can be purchased at: http://csmperformance.com/
Price: $999.99







Last edited by CSM Performance; 01-16-2019 at 12:03 PM.
CSM Performance is offline  
Old 08-24-2018, 10:57 AM
  #2  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

We are offering a discount this weekend! You will receive $50 off a set of Precision Hub Stands with coupon code: "precision"

Description:
Easily align your vehicle with precision and accuracy with a complete set of Precision Hub Stands. Made with 6061-T6 Aluminum and Hardened Steel Hardware creating a stiff, rigid frame system. We utilize eight Ball Transfers and two Hardened Steel Pivot Bolts to create an extremely low friction surface for caster, camber, and toe movements which eliminates virtually all resistance that a tire would present when aligning a vehicle. This means you no longer have to roll your vehicle back and forth with every alignment setting change! Each Precision Hub Stand is capable of supporting up to 1000 lbs (4000lb vehicle with 50/50 weight distribution) and adjustable in 0.250” increments from 11.4375” (~11.5″) to center line to *15.4375” (~15.5″) to center line which will accurately represent the tire height of almost any sports or race car. We have added a toe bar to each hub stand with three different positions for measuring wheel to wheel or from string to wheel. We bolt on rare earth magnets to the end of each toe bar to assist in holding the tape measure ends. Finally, we mount threaded feet to hold the Hub Stands in place when needed. We offer three main hub mounting plates. They can be found under the “Wheel Bolt Pattern” option above. If you would like to utilize these as wheel dollies on a smooth shop floor and allow easy access to all suspension components feel free! If you need a different bolt pattern, height, weight requirement, or anything you would like, give us a call and we can make it happen!

A set of Precision Hub Stands can be purchased here:
https://csmperformance.com/



Colton @ CSM Performance LLC
CSM Performance is offline  
Old 08-26-2018, 07:15 PM
  #3  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Last day to use coupon code "precision" for a $50 discount!!!!
CSM Performance is offline  
Old 08-27-2018, 01:32 PM
  #4  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Check out our latest Tech Article and keep an eye out for others!
https://csmperformance.com/the-friction-circle/
CSM Performance is offline  
Old 09-01-2018, 07:04 PM
  #5  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

A nice C4 getting aligned with the assistance of some SmartStrings! Hope everyone has a good Labor Day Weekend!



Check them out at: www.csmperformance.com
CSM Performance is offline  
Old 09-06-2018, 09:33 PM
  #6  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

We have put together another Tech Article! It is over the Basic Force Analysis of a Race Car!
Link: Race Car Basic Force Analysis

Please Note:
We will be taking a 3 month hiatus from posting on the CorvetteForum to post on other forums. We will be back! You can continue to reach us on our website at:
Link: https://csmperformance.com/home/
You can find all of our contact information here:
Link: https://csmperformance.com/contact-us/

We will still be looking over this forum we just won't be posting!

Thanks!
Colton @ CSM Performance LLC
CSM Performance is offline  
Old 09-07-2018, 03:13 PM
  #7  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

We are now offering our Precision Hub Stands in sets of 2 as well!
Price for a set of two: $599.99
Link: https://csmperformance.com/product/p...-half-set-two/
CSM Performance is offline  
Old 01-16-2019, 11:59 AM
  #8  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

And we're back! Quite a bit has changed since September. We have introduced a new laser alignment system and model options including a larger weight capacity!
We're about to have another production run so we're offering a 10% discount on all orders with
Coupon Code: Production

Laser Alignment Description:
After having to go through the string alignment process over and over we decided that there had to be a better way. With customer input and tons of product trials we are excited to introduce our easy to use Laser Thrust Alignment System (LTAS). With our LTAS it literally take seconds to mount and read the Laser Grid Plate to find the thrust once our Precision Hub Stands are on. Now you can measure toe wheel to wheel and check thrust instantly. No more setting up, lugging around, or messing with strings. Want to set thrust from the front to rear to ensure your steering wheel will be straight, easy put the Precision Laser on the front and the Laser Grid Plate on the rear. Want to set thrust rear to front to ensure there is no tracking issues or weird tire wear, easy put the Precision Laser on the Rear and the Laser Grid Plate on the Front. The Precision Laser utilizes a cross hair for easy alignment and positioning. The Laser Grid Plate conveniently features a measured grid for quick measurements. We offer the LTAS in two options. Option 1 includes just one Precision Laser, one Laser Grid Plate, and two quick attach thumb screws. Options 2 includes two Precision Lasers, two Laser Grid Plates, and four quick attach thumb screws. You can achieve the same level of alignment quality with either option but Option 2 makes the process much quicker and easier as you don’t have to move the LTAS side to side. Ready to align your vehicle with extreme precision in record time?





Link: https://csmperformance.com/product/l...gnment-system/

Check us out today @:
https://csmperformance.com/home/
CSM Performance is offline  
Old 02-01-2019, 01:27 PM
  #9  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Check it out!!
We are currently testing our new Precision Hub Stands Mk II design with our innovative Lock-A-Lug Washer System! More details to come next week including capabilities, advantages, and special Pre-order Pricing!


Please excuse the rusty lug-nuts, they've seen quite a bit of heat cycling!!

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 02-03-2019, 08:58 PM
  #10  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Big Announcement!
Our updated Mk II Precision Hub Stands are now available for Pre-Order!




We took our rave-reviewed Precision Hub Stands and made them even better. We are proud to introduce our new Mk II Precision Hub Stands! We have integrated our proprietary Lock-A-Lug system with 7075-T6 Lug Washers allowing for any pattern between 5×100 (5×3.937″) and 5×130 (5×5.118″) to easily be bolted on! You no longer need special plates or to search for the proper pattern. In doing this we have stiffened our Hub Mount Plate as well as modified our new Toe Bars (not pictured) to be made of solid 6061-T6. We have also moved to CNC engraving our logo on the Hub Mount Plate saving the stickers for the cars where they belong! The Mk II PHS are more accurate and more universal than our previous set as well as one step above the rest! Now is your opportunity to own a set at a much lower price than when they are released! We will only be running this special until the end of February and ship early to mid-April, just in time for the race season.

Link:*https://csmperformance.com/product/m...nds-pre-order/



Pre-order Details:
Regular Price: $1149.99
0-20 Pre-orders: Price drop to $999.99
20-30 Pre-orders: Price drop to $949.99 (We’ll refund the difference)
30+ Pre-orders: Price drop to $919.99 (“)

Description:
From the start we set out to create a product to give racers a reliable, robust system to align their race car at home or even the paddock. We believe you shouldn’t need to spend a fortune to precisely align your car or even need to go to a professional shop. We worked with a team of racers, engineers, and mechanics from which we are proud to present our Precision Hub Stands Mk II. We start off by CNC machining billet 6061-T6 or 7075-T6 aluminum for all of the major components right here in the USA. Next, we utilize Made in USA hardened steel bolts , ground pivot pins, and high grade ball rollers. This creates an extremely low friction surface for caster, camber, and toe measurements; virtually eliminating all resistance that a tire presents. Turn Plates and rolling your vehicle back and forth with every alignment change is a thing of the past! Each Precision Hub Stand is capable of supporting 1000 lbs or up to 1250 lbs depending on the selected option. Adjustable in 1/4″ radial height increments they accurately represent the tire height of almost any sports or race car in the world. Rigid mounted Toe Bars with precision length spacers allow for incredibly accurate toe measurements! With rare earth magnets on every Toe Bar you don’t have to worry about the tape measure coming off either. Using threaded feet the Hub Stands can be held in place when needed as well. When it comes to Hub Stands, no other company offers the smoothness of 8 (or 12) ball rollers, the weight capacity, or the caster/camber abilities.

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 02-11-2019, 09:48 PM
  #11  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Here's a set of our Mk II Precision Hub Stands with the LTAS system and a Waterproof Doro Custom Cut Case!





Get them while the Pre-Order discount lasts!

Check it out at: https://csmperformance.com/product/m...nds-pre-order/





Colton @ CSM Performance LLC
CSM Performance is offline  
Old 02-19-2019, 09:16 AM
  #12  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

We're down to the final 10 days of our pre-order sale! Don't miss out on exclusive pricing for the most versatile and innovative Hub Stands on the market! We've brought a new game to the table with our proprietary Lock-A-Lug system. Ready to increase tire life and decrease lap times?

Check us out at: Mk II Precision Hub Stands

Proudly Engineering and CNC Machined right here in the USA.

Drawing of the LTAS on our older Precision Hub Stands (exact lasers not shown):



Colton @ CSM Performance LLC
CSM Performance is offline  
Old 02-25-2019, 05:45 PM
  #13  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Only three days remaining for the Pre-Order Sale!! Check it out @ https://csmperformance.com/product/m...nds-pre-order/

Here's look at our latest Promo Video


Colton @ CSM Performance LLC
CSM Performance is offline  
Old 02-28-2019, 12:25 PM
  #14  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Last day of the Pre-Order sale! This opportunity only comes once a year! Ready to slash alignment and lap times?

Get your set today @ https://csmperformance.com/product/m...nds-pre-order/



Colton @ CSM Performance LLC
CSM Performance is offline  
Old 03-07-2019, 07:29 PM
  #15  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

With that, we have our last in-house used set of the Original Precision Hub Stands up for sale. The purchase includes a waterproof, custom cut carry case as well. Only one set available!

You can find the used set @:

https://csmperformance.com/product/u...ub-stands-set/




Thanks!
Colton @ CSM Performance LLC
CSM Performance is offline  
Old 03-11-2019, 10:41 PM
  #16  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

The used set has been sold! We've had quite a few questions on the LTAS so we put together a Tech Article on our LTAS system, found below

LTAS Description:

After having to go through the string alignment process over and over we decided that there had to be a better way. With customer input and tons of product trials we are excited to introduce our easy to use Laser Thrust Alignment System (LTAS). With our LTAS it literally take seconds to mount and read the Laser Grid Plate to find the thrust once our Precision Hub Stands are on. Now you can measure Front Toe wheel to wheel and set Front Thrust at the same time. Once the front is done you can set the rear by measuring to the Laser Lines. No more setting up, lugging around, or messing with strings.The Precision Laser utilizes a cross hair for easy alignment and positioning. The Laser Grid Plate conveniently features a measured grid for quick measurements.



Measuring Rear Toe with LTAS on a Subaru WRX on our Original Precision Hub Stands

We’ve had quite a few customers ask us how exactly the LTAS works as it is a new product on the market with nothing else like it! So, we’ve put together several examples and the steps to utilizing the LTAS.



Figure 1: LTAS System Overview

LTAS Instructions:

Step 1: Install the Toe Bars in the lowest possible position of both front Precision Hub Stands (PHS) and in the highest possible position of the rear PHS (same height as the hub).Install the Lasers onto the Toe Bars on the front PHS and the Laser Grid Plates on the Toe Bars on the rear PHS as outlined in the above figure with the supplied Thumb Screws. Turn on the Lasers in the first ON position (pendulum locked) and point them towards the Laser Grid Plates on the rear PHS until the center line (cross) is in the vertical center of the Laser Grid Plate.



Laser Grid Plate installed on PHS

Step 2: Utilize tape measures to measure and set the Toe at the Front of the Vehicle. While doing so ensure the position of the laser line center (cross) is the same measurement on both Laser Grid Plates (passenger and driver side). This sets the front wheels angularly aligned with the centerline of the vehicle (thrust). Your front toe and thrust have been set. See Figure 2 for visual.



Figure 2: Setting Front Thrust with LTAS

Step 3: Remove the Laser Grid Plates from the rear and utilize the Precision Scale to measure from the front of the rear PHS Toe Bar to the laser line and from the rear of the rear PHS Toe Bar to the laser line. To find the Toe at the rear wheel, add ½ the total Toe at the front (amount of the Toe at each front wheel) to the Toe measured with the Precision Ruler with the proper sign convention found below. See Figure 3 for visual. Since the Front Toe has been angularly aligned with the centerline of the vehicle (thrust), the Rear Thrust is also aligned since it is set off of the front (laser line), ensuring proper thrust angles throughout the vehicle.



Figure 3: Setting Rear Toe With LTAS

LTAS Guidelines and Examples:

When measuring Toe between the Toe Bars on either side use the following convention: Measurement between rear of Toe Bars minus (-) measurement between front of Toe Bars. This means that Toe In is a positive value and Toe Out is a negative value.

When measuring Toe between the Toe Bars and the Laser Line use the following convention: Measurement between Front of Toe Bar and the Laser Line minus (-) the measurement between the Rear of Toe Bar and the Laser Line. This means that Toe In is a positive value and Toe Out is a negative value.

To convert the Toe relative to the laser line to the Toe relative to the center-line of the vehicle (Actual Toe) simply add the Rear Toe relative to the laser to ½ the Front Toe.

EXAMPLE 1: If a vehicle has 1/4” Total Toe In at the front then each front wheel has 1/8” of Toe In (Positive). Measuring from the rear driver Toe Bar (D) to the laser at the front and rear of the Toe Bar (D) results in the following measurements, 5” at the front and 5 ½” at the rear (I and J in Figure 12). This shows that relative to laser line, the rear wheel has a Toe Out of ½” (Negative) so –½” of Toe. To convert this from the Toe relative to the laser line to the Toe relative to the vehicle centerline (actual Toe) add the Toe values for the front and rear wheels.

1/8” (Positive, Front) + -1/2” (Negative, Rear) = -3/8” of Toe or 3/8” of Toe Out at the rear driver wheel.

EXAMPLE 2: If a vehicle has 1/2” Total Toe Out at the front then each front wheel has 1/4” of Toe Out (negative). Measuring from the rear driver Toe Bar (D) to the laser at the front and rear of the Toe Bar (D) results in the following measurements, 4” at the front and 4 1/4” at the rear (I and J in Figure 12). This shows that relative to laser line, the rear wheel has a Toe Out of 1/4” (Negative) so –1/4” of Toe. To convert this from the Toe relative to the laser line to the Toe relative to the vehicle centerline (actual Toe) add the Toe values for the front and rear wheels.

-1/4” (Negative, Front) + -1/4” (Negative, Rear) = -1/2” of Toe or 1/2” of Toe Out at the rear driver wheel.

EXAMPLE 3: If a vehicle has 0” Total Toe at the front then each front wheel has 0” of Toe. Measuring from the rear driver Toe Bar (D) to the laser at the front and rear of the Toe Bar (D) results in the following measurements, 2 1/2” at the front and 2 1/4” at the rear (I and J in Figure 12). This shows that relative to laser line, the rear wheel has a Toe In of 1/4” (Positive) so 1/4” of Toe. To convert this from the Toe relative to the laser line to the Toe relative to the vehicle centerline (actual Toe) add the Toe values for the front and rear wheels.

0” (Front) + 1/4” (Positive, Rear) = 1/4” of Toe or 1/4” of Toe In at the rear driver wheel.

EXAMPLE 4: If a vehicle has 1/4” Total Toe Out at the front then each front wheel has 1/8” of Toe Out (negative). Measuring from the rear driver Toe Bar (D) to the laser at the front and rear of the Toe Bar (D) results in the following measurements, 6 1/2” at the front and 6 1/2” at the rear (I and J in Figure 12). This shows that relative to laser line, the rear wheel has a Toe of 0” (Positive) so 0” of Toe. To convert this from the Toe relative to the laser line to the Toe relative to the vehicle centerline (actual Toe) add the Toe values for the front and rear wheels.

-1/8” (Front, Negative) + 0” (Rear) = -1/8” of Toe or 1/8” of Toe Out at the rear driver wheel.

EXAMPLE 5: If a vehicle has 3/4” Total Toe Out at the front then each front wheel has 3/8” of Toe Out (negative). Measuring from the rear driver Toe Bar (D) to the laser at the front and rear of the Toe Bar (D) results in the following measurements, 6” at the front and 6 1/2” at the rear (I and J in Figure 12). This shows that relative to laser line, the rear wheel has a Toe Out of 1/2” (negative) so -1/2” of Toe. To convert this from the Toe relative to the laser line to the Toe relative to the vehicle centerline (actual Toe) add the Toe values for the front and rear wheels.

-3/8” (Front, Negative) + -1/2” (Rear) = -7/8” of Toe or 7/8” of Toe Out at the rear driver wheel.

You can see that the LTAS greatly speeds up the alignment process as well as improves the total accuracy. This system paired with our new Mk II Precision Hub Stands is second to none when it comes to user-ability, versatility, and accuracy. If you’re looking to improve lap times and decrease alignment times you’ve come to the right place. Head over to our shop to check out all of our options. If you have any further questions feel free to reach out to us on our Contact Us page.

https://csmperformance.com/product/l...gnment-system/



Colton @ CSM Performance LLC

Last edited by CSM Performance; 04-07-2019 at 11:15 AM.
CSM Performance is offline  
Old 03-19-2019, 10:40 PM
  #17  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Big Announcement!
We have decided as a company to take our Hub Stands to the next level in fit, finish, and quality. We produce the most premier Hub Stands in the industry and will continue to grow doing so. To achieve this we have made some design revision to our Mk II Precision Hub Stands. So without further ado lets get to the description and some photos!

Description:
Our Mk II Precision Hub Stands are unrivaled in weight capacity, versatility, accuracy, and finish quality. The best way to create a product is to go directly to the users and that's exactly what we've done. The Mk II Precision Hub Stands have been designed with the help of racers, mechanics, and engineers using modern Finite Element Analysis tools to optimize every aspect. We offer an exact fit Pelican™ Case, the best cases in the world, to ensure easy transportation. We've developed an unparalleled Laser Thrust Alignment System (LTAS) designed specifically for our Mk II Precision Hub Stands. We exclusively CNC machine our components from billet aircraft grade aluminum at an ISO 9001 facility right here in the USA. We've integrated our proprietary Lock-A-Lug system which employs tapered Lug Washers to perfectly match any pattern from 5x100mm (5x3.937") all the way to 5x130mm (5x5.118"). Our Hub Stands take advantage of Ball Transfer technology to create a virtually frictionless surface for extremely precise alignment measurement. We have even included a positional locking system to hold the Mk II Hub Stands in place when needed. We're able to do all of this and retain a fine height adjustment system to match practically any vehicle. We also include all the needed tools to assemble and utilize the Mk II Stands. Every tool proudly comes from a Made in USA sources including Proto® and Bondhus®. Every component flawlessly fits together; The Mk II Precision Hub Stand is truly a perfect blend of form and function.

https://csmperformance.com/product/m...on-hub-stands/

Product Photos:




















And everyone loves some CNC Photos:







Thank you to all of our customers who have supported us thus far! And to our future customers, we guarantee you'll be impressed!

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 03-30-2019, 12:30 PM
  #18  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

We finished the production run of our MK II Precision Hub Stands this week and in celebration of creating the foremost Hub Stands available we're offering a sale this weekend only!

For $100 off orders over $1000 -> Code: 100off

For $200 off orders over $2000 -> Code: 200off

For $300 off orders over $3000 -> Code: 300off

And if you're a NASA member you can save an additional 10%
https://www.nasaproracing.com/benefits

Our Hub stands are unrivaled in weight capacity, versatility, accuracy, finish quality, and technological capabilities with our LTAS.

https://csmperformance.com/home/




Colton @ CSM Performance LLC

Last edited by CSM Performance; 03-31-2019 at 11:33 AM.
CSM Performance is offline  
Old 04-06-2019, 06:35 PM
  #19  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

Check out our updated Pelican Case! Waterproof, wheeled, and indestructible!


https://csmperformance.com/home/



CSM Performance is offline  
Old 04-12-2019, 03:46 PM
  #20  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 556
Received 28 Likes on 21 Posts
Default

All Pre-Orders have officially shipped out! Have any questions regarding our Mk II Precision Hub Stands? Feel free to reach out to us through our website, by email, or by phone!
We're nearing the end of our sale this week. Remember, all NASA member receive an additional 10% off by contacting us.

https://csmperformance.com/product/m...on-hub-stands/

Colton @ CSM Performance LLC
CSM Performance is offline  

Thread Tools
Search this Thread
Quick Reply: CSM Performance LLC Precision Hub Stands


Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: