WildVettes 97-17 C5 C6 C7 Corvette Jacking Jack Pucks Lifting Lift Pads $25 for 4!
#1
Former Vendor
Thread Starter
WildVettes 97-17 C5 C6 C7 Corvette Jacking Jack Pucks Lifting Lift Pads $25 for 4!
The first and best mod for your Corvette! Protect your investment!
The price is $25 shipped for a set of 4 and $16 for a set of 2. Everyone who owns a 97+ Vette should own a set even if they don't work on their own car. These can save costly repairs down the line when your mechanic doesn't have a set and messes up the car with their lift. I had my 14 on a dealer lift 2 times in its life and the frame was scratched.
All colors currently available!
CLICK HERE TO ORDER!
Check out our Afe/PFadt Sale while you are there checking out the pucks!
New Colors: Limited Production
[
FAQ:
1. I don't like paypal and that is the only option on your site. Can you just take my payment directly without Paypal?My Website only uses Paypal as a payment processor. If you follow the transaction to the very end you can checkout without creating or using a Paypal account with your credit or debit card.
2. What are they made out of and can I leave them in?They are made out of a proprietary polyurethane blend and we don't recommend leaving them in the car.
3. I like the more expensive leave in or aluminum pucks, what makes yours different?Aluminum pucks have several downfalls. They are smaller in size and provide a hard sharp surface that will still damage your frame paint each time you use it. They aren't adjustable so you need a separate set for your Z06/ZR1 or C7 because they have a different frame thickness than base steel C5/C6 cars. The leave in pucks only come in one color option and they are lower profile designs which offers less clearance when jacking up your vehicle. They are still visible from the side of the car. Both types also COST MORE!
4. How much is shipping and how quickly do they ship?Shipping is free and usually they ship same day to next day and leave usps priority mail which is 3 days or less to anywhere in the country.
5. I don't work on my own car, do I still need them?YES, most of the GM dealers I have spoken with do not use anything like this and it is very unlikely if you had a flat or break down somewhere that the nearest service shop would have any available to use. $25 is a very small investment to protect your vehicle from damage.
The price is $25 shipped for a set of 4 and $16 for a set of 2. Everyone who owns a 97+ Vette should own a set even if they don't work on their own car. These can save costly repairs down the line when your mechanic doesn't have a set and messes up the car with their lift. I had my 14 on a dealer lift 2 times in its life and the frame was scratched.
All colors currently available!
CLICK HERE TO ORDER!
Check out our Afe/PFadt Sale while you are there checking out the pucks!
New Colors: Limited Production
[
FAQ:
1. I don't like paypal and that is the only option on your site. Can you just take my payment directly without Paypal?My Website only uses Paypal as a payment processor. If you follow the transaction to the very end you can checkout without creating or using a Paypal account with your credit or debit card.
2. What are they made out of and can I leave them in?They are made out of a proprietary polyurethane blend and we don't recommend leaving them in the car.
3. I like the more expensive leave in or aluminum pucks, what makes yours different?Aluminum pucks have several downfalls. They are smaller in size and provide a hard sharp surface that will still damage your frame paint each time you use it. They aren't adjustable so you need a separate set for your Z06/ZR1 or C7 because they have a different frame thickness than base steel C5/C6 cars. The leave in pucks only come in one color option and they are lower profile designs which offers less clearance when jacking up your vehicle. They are still visible from the side of the car. Both types also COST MORE!
4. How much is shipping and how quickly do they ship?Shipping is free and usually they ship same day to next day and leave usps priority mail which is 3 days or less to anywhere in the country.
5. I don't work on my own car, do I still need them?YES, most of the GM dealers I have spoken with do not use anything like this and it is very unlikely if you had a flat or break down somewhere that the nearest service shop would have any available to use. $25 is a very small investment to protect your vehicle from damage.
Last edited by WildVettes; 02-05-2017 at 05:01 PM.
#15
Former Vendor
Thread Starter
I ordered a frame cutout section from a C5 today. I will be doing an instructional video that will also show what is happening on the inside of the frame when the pads are inserted. I am going to weld a stand on the frame to use at local car shows to demo the products.
I am already planning Plastic Fantastic for 2017, but anyone else local that knows of any shows should let us know so we can try to be there!
We are having a hard time keeping up with demand, but most people should see tracking updated tonight for those pending weekend orders. Those from last week should start seeing them show up tomorrow in your mail boxes.
As always feel free to reach out with any questions, comments, or concerns. Thanks!
I am already planning Plastic Fantastic for 2017, but anyone else local that knows of any shows should let us know so we can try to be there!
We are having a hard time keeping up with demand, but most people should see tracking updated tonight for those pending weekend orders. Those from last week should start seeing them show up tomorrow in your mail boxes.
As always feel free to reach out with any questions, comments, or concerns. Thanks!
#17
Former Vendor
Thread Starter
More tracking went out. Yesterday's orders should ship by tomorrow as the new batches roll in. I am hoping to get caught up with 1 day processing by Friday as I ordered a larger batch. Thank you for all who have purchased.
#20
Former Vendor
Thread Starter
The post office being closed for Veteran's day delayed some shipments. Everyone should have tracking via email (search "PayPal" if you don't see it) and will be dropped off at the PO Monday.
I had to refuse a Blue batch due to QC issues and there are still 3 of you from early in the week that don't have any movement on the tracking. I am sorry about that. The manufacturing process has been tweaked since then to eliminate the problem in the future. Those should also leave Monday.
Thank you again to all those who have ordered! Have a great weekend!
I had to refuse a Blue batch due to QC issues and there are still 3 of you from early in the week that don't have any movement on the tracking. I am sorry about that. The manufacturing process has been tweaked since then to eliminate the problem in the future. Those should also leave Monday.
Thank you again to all those who have ordered! Have a great weekend!