TPS RPM C5 & C6 Long Tube Headers-$999 Shipped! w/ X-Pipe-MADE IN THE USA!
#1
Supporting Vendor
Thread Starter
TPS RPM C5 & C6 Long Tube Headers-$999 Shipped! w/ X-Pipe-MADE IN THE USA!
TPS RPM C5 & C6 Long Tube Headers & X-Pipe-$999 Shipped!
-Made in the USA & Lifetime Warranty!
-Available in 1-7/8" & 1-3/4" (C5 Only)
-Off Road & Catted Versions Available
-0% Financing Available for up to 1 year!
-Affirm & Paypal Financing Accepted
TPS Motorsports is proud to announce our RPM Series of Long Tube Headers! Our headers are the ONLY full stainless steel headers and X-Pipe combo which are Made in the USA for under $1000! We're also proud that our headers are made with 304 stainless steel sourced and manufactured in the USA! Each set of headers is mandrel bent by your fellow Americans to ensure a high quality product for your Vette. Our RPM headers have 1-7/8" primaries and connect to a high flowing 3" X-pipe which can be ordered as a Off-Road (Without Catalytic Converters) or with High Flow Catalytic Converters. Typical gains are 45-50RWHP with a custom tune.
For those who like extra thermal protection from their headers you can add Ceramic Coating to your headers for only $300 which will help reduce under hood temps.
We are so confident in the quality of our headers we include a limited lifetime warranty!
Each set TPS Headers includes headers, X-pipe, clamps, header bolts, gaskets, 02 Extensions and a TPS Motorsports Billet Aluminum Oil Catch Can!
Click here to place your order!
FREE TPS BILLET CATCH CAN WITH EVERY TPS HEADER PURCHASE!
-Made in the USA & Lifetime Warranty!
-Available in 1-7/8" & 1-3/4" (C5 Only)
-Off Road & Catted Versions Available
-0% Financing Available for up to 1 year!
-Affirm & Paypal Financing Accepted
TPS Motorsports is proud to announce our RPM Series of Long Tube Headers! Our headers are the ONLY full stainless steel headers and X-Pipe combo which are Made in the USA for under $1000! We're also proud that our headers are made with 304 stainless steel sourced and manufactured in the USA! Each set of headers is mandrel bent by your fellow Americans to ensure a high quality product for your Vette. Our RPM headers have 1-7/8" primaries and connect to a high flowing 3" X-pipe which can be ordered as a Off-Road (Without Catalytic Converters) or with High Flow Catalytic Converters. Typical gains are 45-50RWHP with a custom tune.
For those who like extra thermal protection from their headers you can add Ceramic Coating to your headers for only $300 which will help reduce under hood temps.
We are so confident in the quality of our headers we include a limited lifetime warranty!
Each set TPS Headers includes headers, X-pipe, clamps, header bolts, gaskets, 02 Extensions and a TPS Motorsports Billet Aluminum Oil Catch Can!
Click here to place your order!
FREE TPS BILLET CATCH CAN WITH EVERY TPS HEADER PURCHASE!
__________________
TPSMotorsports.com
Cesar Trevino
2705 Lafayette St
Santa Clara, CA 95050
Phone : 408-898-4632
Direct : 408-709-3020
Email : CesarT@TPSMotorsports.com
Click here to Join us on Facebook!Authorized dealer of Corbeau Seats,HorsePower Research, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Whipple, Vortech, Paxton, Procharger, Billy Boat Exhaust, GHL Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...
Cesar Trevino
2705 Lafayette St
Santa Clara, CA 95050
Phone : 408-898-4632
Direct : 408-709-3020
Email : CesarT@TPSMotorsports.com
Click here to Join us on Facebook!
Last edited by Cesar@TPS; 06-12-2018 at 03:35 PM.
#2
Supporting Vendor
Thread Starter
The Numbers are in TPS Rpm headers only Bone stock C5 Z06 with Tune. Bottom Is baseline , Top is headers only No Tune and middle after Tunning. 372 RWHP/ 362 RWTQ
#3
Supporting Vendor
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Great ground clearance also!
These are pictures from a C5 Z06 on stock suspension which has been lowered to the most it can on stock bolts.
These are pictures from a C5 Z06 on stock suspension which has been lowered to the most it can on stock bolts.
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
#5
Supporting Vendor
Thread Starter
Another Satisfied customer with The all New TPS RPM Long Tube headers, great fit ,no ground clearance loss and they Sound great too!!
#6
Supporting Vendor
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
In stock and ready to ship... great numbers also. Below are number from a stock C6 Z06 except headers.
Stock-423RWHP, 382RWTQ
TPS Headers & Tune-462RWHP, 423RWTQ
Gain-39RWHP, 41RWTQ
Stock-423RWHP, 382RWTQ
TPS Headers & Tune-462RWHP, 423RWTQ
Gain-39RWHP, 41RWTQ
#7
Supporting Vendor
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
New shipment of x-pipes just came in... here is what we can ship immediately
C5 1-7/8" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
C5 1-3/4" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
C6 1-7/8" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
**C6 Z06, C6 2005-2008
**C6 2009-2013 (Coming soon)
C5 1-7/8" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
C5 1-3/4" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
C6 1-7/8" Headers w/ X-Pipe (Catted or non-catted)
**Uncoated Stainless and ceramic coated
**C6 Z06, C6 2005-2008
**C6 2009-2013 (Coming soon)