Anyone have complete specs on the 219 cam?
#1
Melting Slicks
Thread Starter
Anyone have complete specs on the 219 cam?
Anyone have the cam timing for the 219 cam? Most specifically the duration at .100", .200" and .300"?
#2
Melting Slicks
Member Since: Oct 2000
Location: Heidelberg PA
Posts: 3,426
Likes: 0
Received 4 Likes
on
4 Posts
Cruise-In V Veteran
Re: Anyone have complete specs on the 219 cam? (89vette)
89vette.
Do a search in tech or mod forum, you may have to look in the archives and you should find the info.
This has been on the forum many times.
Not sure if this helps: http://www.thirdgen.org/newdesign/tech/mods3.shtml
[Modified by 85vet, 1:11 AM 12/24/2002]
Do a search in tech or mod forum, you may have to look in the archives and you should find the info.
This has been on the forum many times.
Not sure if this helps: http://www.thirdgen.org/newdesign/tech/mods3.shtml
[Modified by 85vet, 1:11 AM 12/24/2002]
#3
Melting Slicks
Thread Starter
Re: Anyone have complete specs on the 219 cam? (85vet)
I'm not looking for total lift or just duration at .050". I'm looking for the duration at various points so I can see how the lobe is shaped.