CorvetteForum - Chevrolet Corvette Forum Discussion - Autocrossing & Roadracing Classifieds

FS (For Sale) 10% off EVERYTHING we make at AMT Motorsport starts NOW

Mark@AMT Motorsport — Fri, 22 May 2026 11:14:17 GMT

It's that time again folks! Starting RIGHT NOW and running thru Memorial Day, every AMT product on our site is available at 10% off when you use coupon code "CF26" at checkout. This is your chance to save some serious coin on big ticket items like our Spherical Bearing Kit, The Wing of Power, Finger of God, X-Wife Drop Spindles, and will also yield substantial savings on Camber Kits, Spacers, Motor Mounts, Diff Mounts, Seat Mounts - oh my!

Head to www.AMTMotorsport.com to take advantage of the discounted pricing.

We've listed some of our products below in case you may be unfamiliar with what we do.

C8 Aero - The Wing of Power, Finger of God, Zebulon Splitter, Quick Release Splitter Hardware

The only trunk/frame mounted, reverse swan neck, all US-made, CFD and Wind Tunnel-tested, carbon fiber track wing available for the C8 - or any car. Pair it with a Zebulon front splitter and our quick release system, and you have a streetable track car with a 1.94:1 L/D ratio. There is no more powerful aero package available for the C8 Corvette. By a factor of 2. Period.

There's a lot to unpack, so click here to learn about all of our C8 Aerodynamic offerings

C5-C8 Monoball Control Arm Bushings

If you're looking for slot-car like handling for your Corvette then a set of monoballs is probably the best money you can spend on your car. The car is transformed and so much easier to drive on the limit. We use the best materials available and custom fit each part to your YOUR control arms. All you have to do it send them to us and we take care of the rest, and return shipping is included.

Follow this link if you would like to turn your car into a race car.

C5-C8 Ultralow Seat Mount

This is the lowest, strongest, safest billet seat mount available for the Corvette. It will put your seat on the floor if needed. Using this mount with the Sparco QRT-R seat I gained almost 2 inches of head room over MTI rails with a Sparco EVO. Our integrated sub belt takes the guess work out of installing your 5 or 6 point harness. Not only that but it will survive an 85G mostly-rear impact. This seat mount saved my life and it can save yours too - just hope you never need to find out!

Follow this link to get yourself low.

C7/C8 Titan Tow Hooks

Made from 7075-aluminum and hardened 17-4PH stainless steel, this US-made aerospace-grade tow hook could actually tow a space shuttle. So it'll look bitchin' on your street car or pull you out of a tire wall easy peasy.

Prepare for launch here

C5-C8 Adjustable Camber Kit

The product the launched our company is available for all C5-C8 Corvettes. If your car sees any serious track time than a camber kit is virtually required equipment. Set your alignment once and never worry about it again. Everything is USA made and guaranteed for life.

For more info on C5 and C6 camber kits follow this link. For the C6Z/ZR1 head over here. To solve problems for all C7s head this way.My C8 peeps should take a look seeright here

Differential Mounts - C5 and C6

Mitigate wheel hop and stop your trans from flopping around during hard cornering with our offerings for the C5 and C6 Corvettes. Rather than knocking off the same product that everyone else has for the last 15 years, we came up with fresh and updated designs to address short comings from competitors. These billet pieces firm everything up without a huge increase in NVH and they are guaranteed for life.

For the C5 check this out and for the C6 check that out.

X-Wife Drop Spindles for C5 and C6

Combine GSpeed design with AMT Motorsport manufacturing and what do you get? The best God-damned drop spindle on the planet that's what! Machined on our 5 Axis CNC, they start out as 70 lbs blocks and wind up as the 6.5 lbs beauties you see before you. Available in plain finish or your choice of anodized colors.

Learn more about the X-Wife by clicking here.

C4-C7 Wheel Spacers

We offer 4 different sizes of wheel spacers. Our 1/4" spacer uses the lip of the stock hub for centering and can be used with stock length studs. Our 3/8" spacer pushes the wheel out a smidge further but the ring on the hub is no longer effective. We recommend going to the 2.5" ARP studs if you're using a 3/8" spacer. We also offer 3/4" and 1" spacers with a machined lip for centering. These spacers should use the 3.25" ARP studs.

For 1/4" and 3/8" spacer head this way. For 3/4" and 1" go that way.

C5/C6 Vulcan Motor Mounts

These mounts are now on their third variation and better than ever. A single bolt keeps your motor from moving fore and aft, while vulcanized rubber dampens the vibrations so they're not as harsh as solid mounts. We now use a hard anodized 6061 center section to keep the 2 rubber pucks in each assembly where they belong. Make no mistake these mounts do not feel like the pillowy soft oil-filled gushiness of the stock mounts. You are definitely going to feel more of the engine with these mounts, but your 350 lbs lump of a motor will not be moving all over your engine bay either when performance driving.

Follow this link to order yourself up a set of motor mounts

C5-C6 Extended Gas Pedal

Our product makes heal/toeing your C5 and C6 Corvette a breeze. It's a cheap and effective mod to increasing your driving enjoyment and I guarantee you'll love it or I'll give you your money back.

To make your Corvette easier to drive at the limit, click here.

C7 M80 Adjustable Toe Links

After selling a different product for a number of years, we've decided to start making our own version of adjustable toe links for all C7 Corvettes. The previous product had fitment issues with various parts and quality issues with the heim joints. Trying to work with the supplier to correct the issues wasn't getting anywhere, so in order to best serve our customer base, we came up with the AMT Motorsport M-80 Toe Links which use 7075 aluminum, 17-4 PH pins, and FK Heim Joints for the strongest and longest lasting toe links on the market.

Head here to snag a pair.

Thanks as always for the support!

FS (For Sale) 18 x 13 forgestar c6-c7 WB

c5racr1 — Thu, 21 May 2026 15:24:24 GMT

https://www.corvetteforum.com/forums...black-rim.html

FS (For Sale) Traqmate datalogger with Mobius camera

Msvette14 — Tue, 19 May 2026 15:15:05 GMT

Guaging interest if anyone would want an old traqmate data logger with a Mobius camera. Comes with the original box and everything to wire it in. I will get more pictures to show I have the accelerometer box and gps antenna...Asking $400 shipped obo

FS (For Sale) Used Hoosier 18 315 & 345

Kamran — Mon, 11 May 2026 20:14:25 GMT

A7 315, and R7 345. $75 each, pick up (Seattle area) or plus shipping.

FS (For Sale) Sparco Hans Compatible Six point belts

jfaphoenix32 — Sat, 09 May 2026 19:18:40 GMT

Sparco 6 point red seatbelts.

only used 3 times on track.

Hans compatible.

Good through 2028.

$ 150 plus shipping.

jfaphoenix32@aol.com
6106394960

Joe

FS (For Sale) ACP Front Bumper w/ 4" Splitter & Carbon Undertray (C5)

Ekroeger2006 — Sat, 02 May 2026 14:04:15 GMT

Brand New ACP Fiberglass Front Bumper, 2 piece race version, with 4" Splitter. Never mounted or mocked up. Also have the Carbon Laguna Undertray (4"extended) to match and go with the bumper.

Was going to use these on an ST3 build, but have since decided to part extras out and sell race car cheaper price later on.

Located in Louisville KY & prefer pickup only due to size/ cost. Any other questions, feel free to ask.

Asking $2850 for both

WTB (Want To Buy) Spec Wilwood Brake Kit/ Spec Penskes C5

Ekroeger2006 — Sat, 02 May 2026 13:57:20 GMT

Looking to see if anyone has the Spec Wilwood front brake kit. I'm located in Louisville, the closer the better so I can potentially pick up. Looking to downgrade from what I currently have.

And i have the AP Racing Radical 9660 Big Brake Kit with ENP Calipers (372mm Rotors) I could also trade if interested.

Let me know what you have available

Thank you

FS (For Sale) Brand new Raybestos ST43 & used EBC: C7 Z06/GS

Kamran — Thu, 30 Apr 2026 23:16:40 GMT

I have several sets of �new� front & rear ST43 for C7 Z06/GS that I had stocked up on before they became unavailable, but no longer need (see pictures):
One set of front: $490 plus $30 shipping
Two sets of rear: $250 plus $25 shipping (each set)

Several EBC front pads I got from one of our local boys as back up's . I�ve never used them and cannot speak for them. You can have the lot shown in the picture for $150 plus $35 shipping.

FS (For Sale) MTI sequential trans with electronics

slow04cobra — Tue, 28 Apr 2026 20:25:58 GMT

I have a MTI trans. 14,000.00 partial trade for a ZR1 trans, trans costed me 35,000.00. No way am i going to get anything near that. Just need to get rid of it. Upgraded electronic. I posted issues with the trans shifting mechanism. They stopped contacting because of the things i posted. So i made my own mechanical linkage. I didn't work out to well and without support and messing with the trans so much i think it just needs to go back to how it was designed.

The trans drove excellent, upshifts were quick and so was downshifts. Loved the trans. With the .87 5th and .777 6th gear, the car would still be pulling at the higher speeds. If it were me i to get it checked out and would buy new cable linkage.

Serious buyers i can text you picture so send me your number.

mti transmission sequentail trans gear ratio - Search

FS (For Sale) Girodisc GP50 Track Pads for C7 GS / Z06

jacobe38 — Mon, 27 Apr 2026 16:47:27 GMT

https://www.corvetteforum.com/forums...rake-pads.html