CorvetteForum - Chevrolet Corvette Forum Discussion - C8 Z06 Discussion https://www.corvetteforum.com/forums/ General Z06 Corvette Discussion, Technical Info, Performance Upgrades, Suspension Setup for Street or Track en Thu, 21 May 2026 21:16:05 GMT vBulletin 60 https://www.corvetteforum.com/forums/images/misc/rss.jpg CorvetteForum - Chevrolet Corvette Forum Discussion - C8 Z06 Discussion https://www.corvetteforum.com/forums/ 2026 Z06 3LZ price check https://www.corvetteforum.com/forums/c8-z06-discussion/4992822-2026-z06-3lz-price-check-new-post.html Thu, 21 May 2026 20:46:52 GMT Hi everyone! New to this forum. Looking for any thoughts on the price of this '26 Z06 3LZ.

MSRP: $151,905
Discounted price: $137,514

It's a 10% discount which doesn't sell me entirely because I've seen Ciocca offer higher discounts and Costco discounts. But also trying to get a feel for how does this price compare to what other owners have paid for similar spec. Is it good at this price or anyone seen/purchase a similar spec for less? Anyone ever had luck negotiating these discounted prices down even further?


Attached Images
File Type: pdf
gm (15).pdf (149.5 KB)
]]> C8 Z06 Discussion wannabemikey https://www.corvetteforum.com/forums/c8-z06-discussion/4992822-2026-z06-3lz-price-check.html Fixing carbon fiber https://www.corvetteforum.com/forums/c8-z06-discussion/4992820-fixing-carbon-fiber-new-post.html Thu, 21 May 2026 20:42:10 GMT Can this be fixed?Or should I throw him in the trash. Disregard the spatula that I had to take away from my dog Image: Can this be fixed?Or should I throw him in the trash. Disregard the spatula that I had to take away from my dog

]]> C8 Z06 Discussion Ryder2020 https://www.corvetteforum.com/forums/c8-z06-discussion/4992820-fixing-carbon-fiber.html What has everyone been doing for the first oil change interval? https://www.corvetteforum.com/forums/c8-z06-discussion/4992787-what-has-everyone-been-doing-for-the-first-oil-change-interval-new-post.html Thu, 21 May 2026 17:00:21 GMT I’m thinking 2000K any other opinions out there? I’m thinking 2000K any other opinions out there? ]]> C8 Z06 Discussion Rapid One https://www.corvetteforum.com/forums/c8-z06-discussion/4992787-what-has-everyone-been-doing-for-the-first-oil-change-interval.html Most aggressive looking C8 Z06 IMHO https://www.corvetteforum.com/forums/c8-z06-discussion/4992671-most-aggressive-looking-c8-z06-imho-new-post.html Wed, 20 May 2026 21:31:57 GMT Transformed my C8 Z06 look..In this video I we upgraded my side skirts, Rear Diffuser, and exhaust which helped completely transform the look of my C8 z06! The aggressiveness of the car is at an all... Transformed my C8 Z06 look..In this video I we upgraded my side skirts, Rear Diffuser, and exhaust which helped completely transform the look of my C8 z06! The aggressiveness of the car is at an all time high now!
]]> C8 Z06 Discussion m103114 https://www.corvetteforum.com/forums/c8-z06-discussion/4992671-most-aggressive-looking-c8-z06-imho.html Memorial Day Weekend Sale - Up to $1000 Off now until 5/26/2026 https://www.corvetteforum.com/forums/c8-z06-discussion/4992636-memorial-day-weekend-sale-up-to-1000-off-now-until-5-26-2026-a-new-post.html Wed, 20 May 2026 17:30:17 GMT 🇺🇸 Memorial Day SALE – Renzo Forgedlite Wheels 🇺🇸

For a limited time, save $1,000 OFF all Renzo Forgedlite 1PC Monoblock Series wheels.

✔ Custom made to order
✔ Sizes 20x10+25 21x13+20
✔ Free Lug Nuts Free Shipping
✔ Built for fender flush fitment
✔ Free Ceramic Coating

Lead time is currently about 7-8 working weeks.

To get the discount, simply click the direct link below, add your favorite wheel model to the cart, and the Memorial Day SALE discount will automatically apply at checkout.

🔥 Direct Memorial Sale Link: https://wheeldesigners.com/discount/MDSALE26

Contact us anytime for pricing, fitment help, or finish options.

📞 714-340-5875 | Jose



]]> C8 Z06 Discussion WHEEL DESIGNERS https://www.corvetteforum.com/forums/c8-z06-discussion/4992636-memorial-day-weekend-sale-up-to-1000-off-now-until-5-26-2026-a.html CCB rear pads for track with copper? https://www.corvetteforum.com/forums/c8-z06-discussion/4992593-ccb-rear-pads-for-track-with-copper-new-post.html Wed, 20 May 2026 11:38:54 GMT There are two sets of part numbers for pads now for CCB, with and without copper. Getting pads with copper are difficult and/or expensive to get these days... Has anyone, who only tracks their car... There are two sets of part numbers for pads now for CCB, with and without copper. Getting pads with copper are difficult and/or expensive to get these days...

Has anyone, who only tracks their car recommend CCB rear pads? I think only Carbotech makes rear pads for CCB rotors, besides OEM of course? So if someone uses Carbotech for the track, which ones are you using and do you prefer them over OEM or not? Do the Carbotech pads still have copper in them?

Thank you... ]]> C8 Z06 Discussion Scott_Wisconsin https://www.corvetteforum.com/forums/c8-z06-discussion/4992593-ccb-rear-pads-for-track-with-copper.html Any other 1lz z07’s out there? https://www.corvetteforum.com/forums/c8-z06-discussion/4992550-any-other-1lz-z07is-out-there-new-post.html Wed, 20 May 2026 01:18:22 GMT After searching for months I finally found and purchased what I’ve been searching for. 25 1LZ Z06 with Z07 Ultimate Package in Sea Wolf Grey with red leather seats and stitching. 1700 miles ... After searching for months I finally found and purchased what I’ve been searching for.

25 1LZ Z06 with Z07 Ultimate Package in Sea Wolf Grey with red leather seats and stitching. 1700 miles

I’ve had a few c3’s and c5’s but this is just a different experience. I love this thing!

Just curious if in other 1LZ Z06’s with Z07 package?




]]> C8 Z06 Discussion 5PointFive https://www.corvetteforum.com/forums/c8-z06-discussion/4992550-any-other-1lz-z07is-out-there.html Removing and replacing the Z06 Aero front splitter https://www.corvetteforum.com/forums/c8-z06-discussion/4992531-removing-and-replacing-the-z06-aero-front-splitter-new-post.html Tue, 19 May 2026 23:32:15 GMT I have seen tons of videos showing how to add a Z06 style front splitter but not removing and replacing an OEM installed Z06 Aero front splitter. Can the two sides of the three piece splitter be... I have seen tons of videos showing how to add a Z06 style front splitter but not removing and replacing an OEM installed Z06 Aero front splitter. Can the two sides of the three piece splitter be removed without removing the bumper? ]]> C8 Z06 Discussion ahalachis https://www.corvetteforum.com/forums/c8-z06-discussion/4992531-removing-and-replacing-the-z06-aero-front-splitter.html Leaking rear main seal https://www.corvetteforum.com/forums/c8-z06-discussion/4992501-leaking-rear-main-seal-new-post.html Tue, 19 May 2026 20:51:41 GMT Discussed ad naseum but I was getting a few small items handled at the race shop that does all my work and they found the rear main seal is leaking. The car is used to drive to on and from the track... Discussed ad naseum but I was getting a few small items handled at the race shop that does all my work and they found the rear main seal is leaking. The car is used to drive to on and from the track and after 4 track days so far this season I lost 1/4 of a qt of oil. I have an appointment at the only dealer within 50 miles of me that can handle the job.

Off season I installed a catch can and I'm wondering if this would be a bullshit reason to not cover under warranty. Solution would be to remove catch can before I bring to dealer.

Any advise would be appreciated. ]]> C8 Z06 Discussion minuteman71 https://www.corvetteforum.com/forums/c8-z06-discussion/4992501-leaking-rear-main-seal.html C8Z06 on 20/21 VTForged GT-5 Comp Spec Brushed Polished https://www.corvetteforum.com/forums/c8-z06-discussion/4992325-c8z06-on-20-21-vtforged-gt-5-comp-spec-brushed-polished-new-post.html Mon, 18 May 2026 20:26:51 GMT
Finally got a set of Brushed/Polished GT-5 on a C8Z06, long overdue! This is our customers Long's car (@tech_lt6) and he just installed our 20x10/21x13 VTForged GT-5 Comp Spec 2-Piece Forged Wheel setup. Brushed faces, Polished FS Lips, Hidden hardware and 3-piece carbon caps. Such a clean and timeless setup, excited to do many more similar setups, enjoy!

www.vtforged.com

vtforged@gmail.com

c/t: 4408215090 (Andy)







]]> C8 Z06 Discussion Andy@VTForged https://www.corvetteforum.com/forums/c8-z06-discussion/4992325-c8z06-on-20-21-vtforged-gt-5-comp-spec-brushed-polished.html Trusted Mechanic is South Florida https://www.corvetteforum.com/forums/c8-z06-discussion/4992250-trusted-mechanic-is-south-florida-new-post.html Mon, 18 May 2026 12:23:31 GMT I live in Boca Raton, FL and just got my 2023 Z06 Z07 package 6 months ago with 22100 miles. It is now throwing codes 2 codes P3171 and P316E, my Amazon ODB2 scanner will not clear them. Looking for... I live in Boca Raton, FL and just got my 2023 Z06 Z07 package 6 months ago with 22100 miles. It is now throwing codes 2 codes P3171 and P316E, my Amazon ODB2 scanner will not clear them. Looking for a trusted mechanic near me to assist. ]]> C8 Z06 Discussion kluces https://www.corvetteforum.com/forums/c8-z06-discussion/4992250-trusted-mechanic-is-south-florida.html Rear spoiler screw issue https://www.corvetteforum.com/forums/c8-z06-discussion/4992228-rear-spoiler-screw-issue-new-post.html Mon, 18 May 2026 06:36:44 GMT I own a 2025 Z06. The other day I decided to replace the low (Short) rear spoilers with the (little bit) taller ones. I started on the right side by removing the 4 screws holding the black plastic... I own a 2025 Z06. The other day I decided to replace the low (Short) rear spoilers with the (little bit) taller ones. I started on the right side by removing the 4 screws holding the black plastic spoiler in place.
I had difficulty re-aligning the screws so I decided to put the original lower (Shorter) one back. I installed the 3 outer screws leaving each loose to help with overall alignment and fit. When I got to the last (Inside) screw,
it didn't want to go back in all the way leaving a gap of about 1/8 inch from fully being snug. I tried muscling it but it seems to be hitting a very "hard stop". This screw is a bit longer than the other 3 because I have the
center piece option on the rear spoiler that I ordered with the car. This center piece requires a longer inside screw to hold it in place. My fear is if I try to overpower the screw to get it to seat properly I may break something
that will require further disassembly to correct. Also... I can insert an Allen wrench into the hole and it seems that I have enough depth/reach inside to allow the screw to reach the appropriate depth.

Anyone know what I'm doing wrong?
]]> C8 Z06 Discussion dckotwicki https://www.corvetteforum.com/forums/c8-z06-discussion/4992228-rear-spoiler-screw-issue.html <![CDATA[If we can't find 5W-50 oil...]]> https://www.corvetteforum.com/forums/c8-z06-discussion/4992190-if-we-can-t-find-5w-50-oil-new-post.html Mon, 18 May 2026 00:58:48 GMT If 5W-50 is not available can 5W-30 be used in a Z06 driven strictly on the street? If 5W-50 is not available can 5W-30 be used in a Z06 driven strictly on the street? ]]> C8 Z06 Discussion Mjp70 https://www.corvetteforum.com/forums/c8-z06-discussion/4992190-if-we-can-t-find-5w-50-oil.html Question on Aftermarket ZR1 High Wing https://www.corvetteforum.com/forums/c8-z06-discussion/4992126-question-on-aftermarket-zr1-high-wing-new-post.html Sun, 17 May 2026 17:50:47 GMT Hello all, I am looking to add a ZR1 High Wing to a stock spoiler Z06. I want the height to be same as a stock ZR1. I have a hard time telling, from pictures on the net, which vendors have kits... Hello all,
I am looking to add a ZR1 High Wing to a stock spoiler Z06. I want the height to be same as a stock ZR1. I have a hard time telling, from pictures on the net,
which vendors have kits that sit at the right height.

Any thoughts or experiences would be appreciated.
Thanks in advance.
NL
]]> C8 Z06 Discussion Sophie!2015 https://www.corvetteforum.com/forums/c8-z06-discussion/4992126-question-on-aftermarket-zr1-high-wing.html PTM settings for race course setup https://www.corvetteforum.com/forums/c8-z06-discussion/4992121-ptm-settings-for-race-course-setup-new-post.html Sun, 17 May 2026 17:24:41 GMT I’ve got a 26 Z06 with Z07 package and I’m still trying to figure this monster out, both launch settings and now PTM settings for a race course. I’m trying to find the time and track days for Barbour... I’ve got a 26 Z06 with Z07 package and I’m still trying to figure this monster out, both launch settings and now PTM settings for a race course. I’m trying to find the time and track days for Barbour Motor Speedway here in Alabama and wondering what PTM setting I should use. PTM Race Pro, PTM Race 1 or PTM Race 2. Let’s start by saying I’m no pro obviously but I’ve driven on a course before in an older C7 years ago. So I’m not completely green and consider myself a pretty good driver, that being said I know I’m not going all out ***** to the wall in Race Pro but I will push myself and the car to what is my comfortable limit. Can anyone give me some recommendations on what setting ? I’m running the 4s tires as

well ]]> C8 Z06 Discussion Rifleman6.6 https://www.corvetteforum.com/forums/c8-z06-discussion/4992121-ptm-settings-for-race-course-setup.html