CorvetteForum - Chevrolet Corvette Forum Discussion - C6 Corvettes for Sale

WTB (Want To Buy) Looking to buy 2008+ MT base, located in Portland OR

Akppilot — Fri, 22 May 2026 03:42:30 GMT

Hi, this is my first post, so I apologize if I do anything wrong. I'm looking to buy a very clean example of a base 2008+ manual C6. I would prefer 3LT and or Z51, and would also prefer under 60,000 miles (Also, No convertibles). I am willing to look at 06 or 07 models, but they would have to be 3LT and Z51. Lastly, I would prefer darker colors, but it's not a dealbreaker. I am located in Portland, OR, and am willing to travel if it's the right car.

FS (For Sale) 2006 3LT silver convertible, GS converted

Saab-Daniel — Fri, 22 May 2026 03:34:42 GMT

Up for sale is my 2-owner 2006 3LT, museum delivery, with ~50k miles, bought on this forum, from its original owner in Bradenton Florida.

Located in Orlando Florida.

I have been the proud owner since 2017 and have put 20k miles on the car in my ownership.

Selling as I have a growing family and need a more spacious car.

Silver with silver top in excellent condition.

3LT Preferred Equipment Package (Heads up display, Bose, power seats with driver memory, etc)

-Dual mode exhaust with remote controlled switch

-Sport seats with two tone leather

Tastefully exterior and interior modifications including:

- Complete Grandsport/Z06 conversion

- Z06 wheels and brakes

- Complete Pfadt suspension, lowered on standard bolts, setup for regular road handling - alignment sheet available.

- Dynamat sound dampening throughout

- Down South Vette Sun visors

- color matched upgraded GS steering wheel, gear **** and armrest

- newer head unit with backup camera (have original head unit and will include in sale)

Performance modifications all performed around 19k miles and include:

- LS3 swapped, cammed, heads and stroked to 6.75L (412 cubic inches) with forged internals

dyno at ~500 rwhp
Z06 exhaust including catalytic converters
New McLeod RST Twin clutch kit and slave at 49k miles, with remote bleeder

- Brazed Differential

- I�m sure there�s more I have left out.

Maintenance has been performed by myself except for clutch replacement.

New alternator in March 2026.

Car is an absolute pleasure to drive and I can�t believe I�m actually putting it up for sale.

Exterior is in excellent condition with few minor scratches and has been living in the garage.

Many more pictures and descriptions available upon request.

Feel free to reach out here or via DM.

Also more than happy to talk on the phone or text.

Most important thing for me is it goes to a good home and someone else gets to enjoy this wonderful vehicle.

$28,999 or near offer

Daniel

WTB (Want To Buy) GS roller

BKM — Thu, 21 May 2026 21:28:58 GMT

Looking for a GS roller to move drivetrain over from a cab
Don�t need to be in great condition, paint doesn�t matter. Must be clean title, from what I heard a salvage title would not be able to be registered here in Norway.
Planning on moving over drivetrain from a 2008 c6 cab

WTB (Want To Buy) 08+, 6MT Ohio

nls2299 — Thu, 21 May 2026 17:47:23 GMT

Just east of central Ohio.
Looking for an 08+ base coupe (no convertibles), 6MT, 50k miles, budget of $25k+/-.
Not entirely opposed to an 06-07 but it would have to be a certain color, or special deal.
Do not want yellow.
Not a huge fan of Black because of how bad most have looked after 20 years of age.
Thanks.

WTB (Want To Buy) C6 M6, Want to buy

JulietKilo — Thu, 21 May 2026 04:02:57 GMT

Looking for a black/blue C6 Corvette with a manual transmission.
Located in FL

FS (For Sale) 2007 BLK Z06 Roller for sale

bruce1 — Wed, 20 May 2026 21:09:59 GMT

My Name is Bruce Santourian. I have my Z06 I am looking at selling and thought you could be interested.
I have been the sole owner, and have enjoyed it immensely. But A lifter went out several years ago. I have retired since then and do not have the income source to finish the rebuild. I was active at Spring Mountain Motorsport Ranch. The car is set up for the race course.

Let me know if you are interested and I can get you more information.

CALIFORNIA CAR
GARAGE KEPT
NO RUST
NEVER SEEN RAIN

Here is a description on what I am offering.
2007 Z06 Rolling Frame project car. NO ENGINE
Includes all the engine parts and hardware that were removed.(everything pictured)
All the hardware had been sorted and separated as like items and packaged separately.

$19,995 OBO (see pics)

Also Available:

-LS7 Engine block-
$4,500 OBO

( this is separate as I have been told I could see 4-5K for this LS7 block stand alone as is.)
Machined GM LS7 block for Darton LS7 dry liners, install sleeves,
Vibratory stress relieve casting, deck, cut rod clearance notches.
Repaired three areas in block bores as pre sleeve install in block prep
*Remaining finishing work to be done prior to assembly, :

Bore block to 4.120" for finish hone to 4.130" (the cost was $3,256 to refurbish this block, the work was done by Steve at Race Engine Development , 5175 Alamosa Park Dr., in Oceanside, Ca., He was one of the original members of Darton Sleeves, has since retired to work in his own shop on his property. 45 years experience, he is famous from out here. the block is in storage in LA. pics available.)

I am planning to put this out on the internet for sale as soon as next week. I need to get it out of my stacker trailer as I have no room in my garage.

Let me know what your thoughts are? I will work with you if I can.

2007 - Z06 LS7
Sole owner.
Z06 was Featured on Jay Leno's Garage.
Z06 was acknowledged, and the dash was signed by Ron Fellows @ Spring Mountain Motorsport Ranch..
Z06 was toured nationwide shown in Carlisle PA, to WeatherTech Raceway@ Laguna Seca, Monterey Ca. Showing my BCP custom machined Billet Valve Covers.
Z06 has NEVER SEEN RAIN
ZERO RUST
Garage kept for 19 years, the exterior finish and interior are in outstanding condition

Options included:

Getrag 3.73 Dif. With Quafe
Double disk race clutch Mcloud
ARE - Dry Sump oil system - w/ scavenging pump
Pfadt race suspension w/ camber
Penski coil over (Nitrogen ) shocks
StopTech Brakes w / stainless lines
Rear roll bar for harness
E85 conversion with sensor
Rear carbon fiber wing
BCP Billet valve covers
American Racing Headers and exhaust system w/ high-flow cats
Aluminum Radiator
NEW, X Cam stage 3 LS3 416+LS7 8660 core,
No Needle rockers
NEW , Cloyes 9-3167AZ timing chain

I look forward to hear back from you.

WTB (Want To Buy) 2010-2013 GS Coupe

Ziramond — Wed, 20 May 2026 18:22:39 GMT

Just like the title says, Looking for a 2010-2013 Grand Sport Coupe. Don't care if it has high miles, if it's an automatic, or what color it is. The only thing I have a preference for really is the interior, I want it black/charcoal or whatever color they call it from the factory. I don't mind a black, red mix but other than that I'm not interested. Must have a clean title, Carfax, and the higher the miles the more detailed maintenance history I'm looking for. I am not looking for an immaculate 10,000 mile example that someone is looking to get $45,000 for. My price point is in the $35,000 range. Just looking for a clean, well maintained, well loved car that I can buy and continue to enjoy and take care of. You can email me at jonathonharris2010@yahoo.com. I will send you my contact info to chat about it. I am located in Iowa and I'm willing to travel. Thanks in advance!

WTB (Want To Buy) C6 Grand Sport or z06

charliec6zz — Wed, 20 May 2026 15:30:52 GMT

Cash ready, looking for a 2008+ Z06 or Grand Sport. Needs to have a clean carfax, Coupe and Manual. Can be modified or stock. Under 40k miles preferred. Willing to travel for the right car. LMK what you got

FS (For Sale) 2011 Grand Sport

bulwinkle54 — Wed, 20 May 2026 12:01:21 GMT

Corvette Grand Sport 2LT, 6 speed manual. Has the hand built engine, dry sump, all the coolers and big brakes. Has the NPP valved mufflers as well. Very well cared for, always garaged. The only modifications are a Haltech CAI, lowered a little on factory bolts, and an aftermarket shifter ****. New brakes and tires last year, a set of older, but plenty of tread, factory run flat tires included. No trades. Located in southern Maine. Needs nothing. $39,500

FS (For Sale) 2007 Lemans Coupe, 3LT, Z51, Auto, 57k miles, $24k

RoverJoe — Tue, 19 May 2026 23:40:21 GMT

Throwing this up here, don't drive it much and I need to downsize the fleet a bit. Car is a 2007 coupe. Lemans/Ebony, 3LT with nav, z51 package, auto trans. 56,695 miles on it as of today. Painted targa top only, no transparent one. Chrome wheels are original and the finish is not great due to age, but they clean up nice. Tires are in great shape, Conti DWS all around. Had it about 2 years now, seems to be all stock. I haven't done anything to it other than replace the delaminated stock radio with a perfect used on I picked up off here, and add the Z06 spoiler, but I can include the stock one if wanted. Also had to replace the broken passenger sunvisor and glove box latch which broke randomly, I guess due to age. Runs great, drives great, other than change the oil a few times I have put maybe 3k miles on it, hasn't needed anything. A/C blows nice and cold, HU display is perfect. No oil leaks or anything dripping under the car. I will try to get it on the lift later in the week for some underbody pics and add them. I know the car was repainted before I got it at some point, my body shop guy says it looks like maybe a dealership repaint, it's the same color and nicely done. Car gets compliments all the time on how sharp the paint looks, it's like new, really stands out for a 20 year old car. Has all LED lights, the Morimoto C7 style headlights, it has the M2W exhaust controller for the switched exhaust with remote. The drivers seat bolster has the leather cracking, I looked into installing replacement covers, but haven't pulled the trigger. If that's an issue for the buyer I could get them done for you for the parts cost as part of the sale if we come to the right agreement. Have the GM accessory car cover, trickle charger, etc in the bag to go with it. Let me know if any questions, have the clean FL title in hand, located in north Miami area. Looking for $24k, open to reasonable offers.

Joe

WTB (Want To Buy) C6 Z06 with Heads Done

gans1992 — Tue, 19 May 2026 12:32:06 GMT

Hey folks, new to the forum and the Corvette life but looking to purchase a C6 Z06 with the heads already done (with receipts/proof). I've owned many fun cars, but after spending a bit of time in the drivers seat of my buddies C6 Z06, I was hooked. Not super strict on the years, but 08+ would be ideal. I'm fine with other small modifications such as exhaust, cam, wheels, etc

Located in Northern Virginia - but willing to ship the car from across the country. Don't believe you can send me a private message yet, but if you have something let me know in the thread and I can share you my contact info so we can discuss more. Thanks!

WTB (Want To Buy) 05/06 manual as my first Corvette

Donquixote — Mon, 18 May 2026 23:09:24 GMT

Preferably below 60k miles or so:cheers:

WTB (Want To Buy) Looking for LS3 C6 | Located in VA

Striker05 — Mon, 18 May 2026 15:12:48 GMT

Hey everyone, figured I�d throw a post up and see what�s out there. I�m actively looking for an LS3 C6 and have a budget around 25-29k for the right car. Located in Northern Virginia, but willing to travel/ship for the right deal.

Preferences:

Atomic Orange strongly preferred (goal color), but open to other colors for the right spec
Lower mileage preferred (roughly 50�60k range ideal)
Z51 and/or 3LT are big bonuses
Maintenance history matters more than mileage

I�d compromise on color for a cleaner car with good options/history.

If you�ve got something that may fit or know of one coming up, shoot me a PM. Thanks!

FS (For Sale) 2009 ZR1 Cyber Gray 9k miles

frasermotony — Mon, 18 May 2026 11:06:45 GMT

2009 Chevrolet Corvette ZR1 3ZR– 9,300 Miles. 2 owner car. Clean Carfax and title in hand. Asking $108,000

Up for sale is an extremely clean and tastefully modified Corvette ZR1 with just 9,300 original miles. This is a true enthusiast-owned car that has been well maintained, garage kept, and never abused. The car runs flawlessly and is extremely clean. I am beyond OCD with my cars. Immediately after purchasing due to how clean the paint was, I PPF’d front bumper, side skirts, rocker panels, and rear quarter panels. Also had brand new Toyo 888 put on all around with fresh alignment, which have less than 100 miles, including the PPF and Ceramic coating. I have a set of Michelin cup 2 tires with 1500 miles I took off that are included. Car had bolt ons done by Late Model Racecraft and made 648/595. For any out of state buyers I am more than happy to FaceTime, send any photo, or help arrange a PPI of this car as there is absolutely nothing to hide.

X-Treme CFM Carbon Fiber High Flow 4.5” Cold Air Intake
Kooks 1 7/8” Longtube Headers with Competition X-Pipe to Corsa exhaust
2.65” Upper Pulley
Lingenfelter LS9 Supercharger Front CNC Ported Snout
1050X Fuel Injector Set
Lingenfelter Performance Idler Pulley
Gates Heavy Duty Supercharger Belt
Fresh Mobil 1 5W-40 Synthetic Oil
Wix Performance Oil Filter
MSD LS Spark Plug Wires
NGK BR7EF Spark Plugs
Dyno Tuned
All work done by LMR in Houston with receipts and dyno
Carbon fiber EOS rear spoiler just installed (have original in perfect condition)

Serious inquiries only. I’m happy to answer any questions or provide additional photos/videos. Please call or text 518-258-8849

FS (For Sale) 2008 Z06 - 46K Miles - $25k - Near Mint before Wreck

Idunnowmyname — Mon, 18 May 2026 04:42:10 GMT

For sale for $25K. Car needs $4 - $5K in parts + labor and paint to be incredible again. Or... Track it as-is!

2008 Z06 with 46K miles. Two semi's picked a fight and the Z06 lost the fight. Car runs and drives PERFECTLY straight and smooth. No airbag deployment. Clean title in hand. Laminated Window Sticker, Build Sheet, Owners Manual, "welcome to corvette ownership" booklet that came with the car when purchased new, 3 keys,

Professionally installed wireless car-play stereo, amp, and sub in custom box. Kooks Long Tube Headers and stainless exhaust back to OE NPP mufflers. M2W, Floyds Mats including custom cut around sub woofer in rear, 10 year ceramic coating, Halo/Roof painted with GM color code paint, Haltech Intake. Heads were fixed by West Coast Cyl Heads. Documentation in hand. No other internal engine mods. Original Cam. Un-Molested drive-train. This car was near mint before this accident. Always garage kept and adult owned/driven. All damaged parts with bolts/screws/clips/etc come with the car. I already bought a used loaded door and hung it so I could roll up the window and keep dust out of interior. Door swings and latches perfectly. No damage to Hinge Pillar.

Car was in the middle lane of the interstate. Semi # 1 was in the left lane and changed lanes into my left door, chewing up the door with his lug-nuts. The car was "locked" to this semi for a second and as soon as the car seperated from semi # 1, the car shot across the middle lane and right lane and t-boned semi # 2 that was all the way over on the right shoulder trying to avoid the collision. The front of the Corvette struck the cab of semi # 2 just under the drivers door of semi # 2. This sent the Corvette into a spin and it came to a stop/rest in the middle of the interstate. The car started up immediately and was driven to the left shoulder.

Damages are/were as follows
- ALREADY REPLACED THE FOLLOWING
* Left Rear Wheel
* Left Rear Tire
* Left Rear Upper Control Arm
* Left Rear Tie-Rod
* Alignment completed and car drives straight. Steering wheel is straight.
* Left door replaced but needs to be de-trimmed, scuffed, painted, and put back together, swapping over some of the parts from the original door (interior trim panel etc).

- NEEDED STILL
* Pull the two front frame rails 3/8" towards the passenger side. Both are "swayed" towards the driver side 3/8". No kinks/cracks/etc. Definitely pullable/repairable. The car aligned and drives straight as-is but the frame was measured and does need to be pulled before cutting off and replacing the bumper reinforcement.
* Cut off and weld on a new front bumper reinforcement (aluminum).
* Replace front bumper cover and impact absorber.
* Repair or replace left inner fender/apron. It's repairable if you know how and IMO, repairing would be better and easier than un-gluing and re-glueing a replacement but that's a judgement call.
* Replace Left Fender and 2-3 fender liner pieces.
* Replace left headlight. (I suppose you *could* repair the original as all 3 pieces of the broken fiberglass headlight bucket are still there but.... replacement would be much easier.)
* Replace Left Hood Hinge
* Replace the lower radiator core support/bracket (bolts onto the frame rails with 4 10mm bolts. The damaged one is repairable if you want to save money but this is super easy to replace.
* De-Trim, Paint, and Re-Trim/Install used left door that is already installed on the car.
* Repair and Re-Paint Left Qtr Panel (Semi # 1 lug nuts got ahold of it but it's repairable). A good painter might be able to "blend" the paint within the panel but it's likely the rear bumper will
need to be removed and paint blended onto rear bumper for paint match. Same thing for the hood honestly. Silver is hard to match w/o blending and the top of the fender is on the same sight plane as the hood.
* Replace Windshield
* Steering Wheel Slightly Bent - Replace or bend it back.

Here are pix before wreck pix, after wreck pix, after damaged parts removed pix, and documentation of cylinder head work etc.

Car is located in Middle Tennessee near Nashville in my garage.