Heads are in
07-03-2007, 06:38 PM
#1
Drifting
Thread Starter
Heads are in
Had a nice box on my doorstep today 
My ported L92 heads came in.
From Texas Speed and Performance. Its fully CNC 5-angle valve job. The machine that does this is brand new and there are only 3 in the country right now. Oh, and these are fully assembled heads too.
Here are the flow numbers they sent me for the heads:
<<Here's some flow data from the stock valve port:
.200 153 113
.300 223 151
.400 283 185
.500 320 204
.600 346 225
.650 350 230
>>
Here's some pics
My ported L92 heads came in.From Texas Speed and Performance. Its fully CNC 5-angle valve job. The machine that does this is brand new and there are only 3 in the country right now. Oh, and these are fully assembled heads too.
Here are the flow numbers they sent me for the heads:
<<Here's some flow data from the stock valve port:
.200 153 113
.300 223 151
.400 283 185
.500 320 204
.600 346 225
.650 350 230
>>
Here's some pics
07-20-2007, 09:13 PM
#3
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Very nice...