2002 Camaro SS Fully Built Race Car
#1
2002 Camaro SS Fully Built Race Car
For Sale: 2002 Camaro SS $30,000, located in Pittsburgh PA
440 ci LSX, 13.5:1 compression ratio, solid roller
-Mast Motorsports 305cc "big bore" heads
-Pac 950 lbs springs
-Titanium intake/ Inconel exhaust valves
-T&D shaft-mount rockers
-All Pro valve covers
-Bullet Racing Cam 280/298 799/782 114 LSA
-Manton 1/2" pushrods
-Isky Red Zone Lifters
-Callies Dragonslayer crank
-Callies I beam rods
-Wiseco pistsons
-Mast Motorsports/Carys 4500 series intake
-Accufab 4500 series throttle body
-Kooks 2" headers
-Wilson Pro Flo 350hp nitrous plate system
-Aviaid dry sump oil system
-Holly Dominator series EFI computer
-Midwest Chassis FAB9 rear w/ Strange center section 4.11 gears
-ATI reverse manual valve body TH400 transmission
- Two converters: Circle D 8" 5200 stall, Ultimate Converter 8" 6800 stall
-Magnafuel external fuel pump/fuel system
-Nasty Performance fuel tank
-Mini tubbed
-Pharro Performance custom front bumper support
- Weld RTS rims with Mickey Thompson drag radials
-Afco shocks front/rear
-Aerospace drag brakes
-Burkhart Racing motor plates
-Burkhart Racing manual steering
-Burkhart Racing tubular K member, tubular A arms
-VFN Sunoco fiberglass hood
-Kirkey racing seats
-Chromoly 10.5 roll cage w/ swingouts both sides
Additional photos available and questions answered. Send me a PM. No trades, willing to sell motor/rolling chassis separately.
440 ci LSX, 13.5:1 compression ratio, solid roller
-Mast Motorsports 305cc "big bore" heads
-Pac 950 lbs springs
-Titanium intake/ Inconel exhaust valves
-T&D shaft-mount rockers
-All Pro valve covers
-Bullet Racing Cam 280/298 799/782 114 LSA
-Manton 1/2" pushrods
-Isky Red Zone Lifters
-Callies Dragonslayer crank
-Callies I beam rods
-Wiseco pistsons
-Mast Motorsports/Carys 4500 series intake
-Accufab 4500 series throttle body
-Kooks 2" headers
-Wilson Pro Flo 350hp nitrous plate system
-Aviaid dry sump oil system
-Holly Dominator series EFI computer
-Midwest Chassis FAB9 rear w/ Strange center section 4.11 gears
-ATI reverse manual valve body TH400 transmission
- Two converters: Circle D 8" 5200 stall, Ultimate Converter 8" 6800 stall
-Magnafuel external fuel pump/fuel system
-Nasty Performance fuel tank
-Mini tubbed
-Pharro Performance custom front bumper support
- Weld RTS rims with Mickey Thompson drag radials
-Afco shocks front/rear
-Aerospace drag brakes
-Burkhart Racing motor plates
-Burkhart Racing manual steering
-Burkhart Racing tubular K member, tubular A arms
-VFN Sunoco fiberglass hood
-Kirkey racing seats
-Chromoly 10.5 roll cage w/ swingouts both sides
Additional photos available and questions answered. Send me a PM. No trades, willing to sell motor/rolling chassis separately.