Great Lakes Illinois | Indiana | Iowa | Michigan | Missouri | Minnesota | Ohio | Wisconsin

1989 Corvette Parts

Thread Tools
 
Search this Thread
 
Old 10-22-2010, 03:42 PM
  #1  
G.Rossman
Burning Brakes
Thread Starter
 
G.Rossman's Avatar
 
Member Since: Sep 2010
Location: Indianapolis Indiana
Posts: 1,125
Received 2 Likes on 2 Posts
St. Jude Donor '13, '15, ‘18, '21

Default 1989 Corvette Parts

Posting this in here because a local or close meeting point would be preferred to shipping most of these items.


Would prefer local pickup in the Indianapolis area or all prices will be plus shipping...whatever it ends up costing.


Color of car is the dk red color and the clear coat has peeled off most of the panels, car had around 176k miles on the clock.

1) Hood (entire front lifting hood) has a section that will need fiberglass repair, looks like a rock gouged it. $450

2) Stock L98 Heads $450

3) Fiberglass targa top (will need headliner has none right now) $400

4) Dash pad (black decent shape) $175

5) Engine (short block) L98 $550

6) Engine upper runners (snakes? one has a small dent in it) $75

7) Stock TB $45

8) Stock transmission A4 (paperwork shows it was rebuilt in 2005ish but I will double check the date and amount it was before I bought the car) $1000

9) Rear end (stock as far as I know) $850

10) Wheels w/tires (GSC tires will need replacing) $200

11) Stock exhaust manifolds $45

12) Weather strip for around back window (brand new) $90

13) Black floor mats (brand new from MAM) $35

14) Black door panels (interior will need refurbed)

15) Side window glass (factory as far as I know) $75 each side

15) Rear bumper cover (section that says "Corvette" $250

16) Front nose section (under where the hood opens) $250

17) New in plastic black center console cusion w/ black logo from MAM $40


I am actually not with the vehicle at this time, but will work on some photos when possible. Wanted to get this up and running for now though, I will have more later like the doors/door skins and things like that as well. Going to have a few corvette people over to help me pull parts off next week. Motor, tranny and rear end still need to be pulled.

This was going to be my race car but I've decided to go another route.



Quick Reply: 1989 Corvette Parts



All times are GMT -4. The time now is 02:21 AM.