New here, with a 1986 Corvette Modified Custom Coupe
08-30-2012, 07:05 PM
#1
Cruising
Thread Starter
Member Since: Aug 2012
Location: Fountain CO
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
New here, with a 1986 Corvette Modified Custom Coupe
Ok first let me just say this is my first time here I am from Fountain, CO and give you some info on this Corvette my brother got it in trade for a debit but he can’t do what he needs with the car so I told him that I will if I get the car. So now I have a bike and car that need to be fixed. The Vet has oil leak under it not sure what yet also backfires and runs rich, looks to have the wrong sparkplugs. I will get more into that later or in different forum. Anyway onto what was done to the car before the last owner abused it.
1986 Corvette
Modified Custom Coupe
Exterior:
Body: Includes 1996 Body Update Kit. Includes New Front Bumper, Factory Driving/Turn Signal Lamps, Side Fender Panels, Body Side Moldings, Rear Bumper, Factory Tail Lamps.
Full Greenwood MotorSports Effects Kit. Included Front Lower Spolier, Side Rockers, Door Extensions, Front Spoiler, Signature Rear Wing.
Complete Vehicle Re-Finish with Dupont 9900S Ultra Jet Black with Burgandy fade strips.
Engine:
Chevy 383 Stroker. Lunati Forged Crank Shaft, Lunait Rods, Forged Aluminum Pistons. ARF Ported and Flowed Cylinder Heads. Lingenfelter "Big Mouth" Intake Manifold, Large Tube Runners, Ported Upper Intake Plenum, 52MM Throttlebody, Ram Air Intake with K&N Style Air Filter.
Wheels:
Weld Racing EVO's, Full Polished and Clear Coated.
Near New ???? Tires
Interior:
Custom Wood Dash
Factory Stock Red. Overall Condition is Good.
1986 Corvette
Modified Custom Coupe
Exterior:
Body: Includes 1996 Body Update Kit. Includes New Front Bumper, Factory Driving/Turn Signal Lamps, Side Fender Panels, Body Side Moldings, Rear Bumper, Factory Tail Lamps.
Full Greenwood MotorSports Effects Kit. Included Front Lower Spolier, Side Rockers, Door Extensions, Front Spoiler, Signature Rear Wing.
Complete Vehicle Re-Finish with Dupont 9900S Ultra Jet Black with Burgandy fade strips.
Engine:
Chevy 383 Stroker. Lunati Forged Crank Shaft, Lunait Rods, Forged Aluminum Pistons. ARF Ported and Flowed Cylinder Heads. Lingenfelter "Big Mouth" Intake Manifold, Large Tube Runners, Ported Upper Intake Plenum, 52MM Throttlebody, Ram Air Intake with K&N Style Air Filter.
Wheels:
Weld Racing EVO's, Full Polished and Clear Coated.
Near New ???? Tires
Interior:
Custom Wood Dash
Factory Stock Red. Overall Condition is Good.
Last edited by mog797; 08-31-2012 at 07:21 PM. Reason: Fix picture
08-31-2012, 04:35 AM
#5
Cruising
Thread Starter
Member Since: Aug 2012
Location: Fountain CO
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Thanks all. Now i just need to figure out the oil leak and change the spark plugs it had AC Delco 5's before but someone put in Delco 41-806 and that seems totally wrong to me. I was thinking Both platinum 4's anyone ever use them.
welcome to the forum!
