CorvetteForum - Chevrolet Corvette Forum Discussion - View Profile: vettesbydesign

vettesbydesign vettesbydesign is offline

CF Senior Member

About Me

  • About vettesbydesign
    Full Name
    kevin gilliam
    Location
    Forsyth Illinois
    Your Zip Code
    62535
    Occupation
    bodyman/shop owner
    Year & Model
    1968/69/72/75
    Country of Residence
    US
  • Signature
    Kustom8

Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 06-07-2010 08:32 PM
  • Member Since: 08-07-2006

Friends

Showing Friends 1 to 10 of 10

Visitor Messages

Showing Visitor Messages 1 to 10 of 21
  1. bugzbunny
    05-16-2016 01:39 PM
    i have a L-46 1969 vette. Had the engine bored 60 over no choice. My builder wants to go roller cam and Aluminum heads. 10.1 pistons and a cam made. He wants to use speed master heads which I have never heard of. I did some research on these and they don't sound very good. He would like them bare to build himself cost $1100.00. I though spending that kinda of money should just get AFR, however don't know which ones. He also stated I could do a 383 motor for around the same price he is asking. Everything is stock in my car and power with ac, however that is off right now. Wanted your opinion on which motor you would do and heads. Also car is for fun not driven daily or any racing.
    It has the Muncie M22 and 3.55 gears posi. Thank you for help
  2. FastEddy
    11-22-2012 09:42 PM
    I am considering swapping my two holleys for the Fast Dual Quad EFI for my tunnel ram on my 64. I have a new stock tank, and hardline 3/8's from tank to the engine bay. What's involved with setting up a return line on this setup as far as how to dump back into the tank? Cut/weld a hardline thru the sending unit/supply line insert? Does any body fab that type of thing up these days? I think that's all that's holding me up - getting a return line into the tank easily. Any idea why the MSD system gets away without a return line? Thanks much, Eddy.
  3. 11-11-2010 01:52 PM
    hello



    http://www.melroseheaders.com/produc...e_and_cats.php



    Melrose Motorsports C-4 X-Pipe and cats

    how much full photo all part ?
  4. C U IN REARVEIW
    09-27-2009 09:14 PM
    how much would a bassani cat back system go for?
  5. NMsharkracer
    07-23-2009 11:01 PM
    Kevin
    I've got a street rod project we're working on and I'm going to get a Lokar shifter set-up. If you're hooked up with Lokar, I'll get you the part numbers and let you price it.

    Jack
  6. skeeter5070
    07-08-2009 08:44 PM
    Where is my distributor ???
  7. pauldana
    07-05-2009 10:50 PM
    best price fro a pare of long tube headers for a 79 vett with 4 speed manuel transmission.
    I have 1 5/8...... I want a bigger tube. If I can afford it. if not, i will stick with my 1 5/8 headmans.
  8. pauldana
    06-22-2009 10:26 PM
    Barry grant 5402020gc
    Paul
  9. TheSkunkWorks
    06-17-2009 06:25 PM
    In case you haven't already seen this...
    http://forums.corvetteforum.com/c3-t...post1570484291
    ...I figure you could use some business. Charlie
  10. skeeter5070
    05-07-2009 08:14 PM
    Hello Kevin, This is Ed.
    Can you get me a Distributor ??
    Ed
    281594-8213
Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.