CorvetteForum - Chevrolet Corvette Forum Discussion - View Profile: Josh@AandASuperchargers

[email protected] Josh@AandASuperchargers is offline

Platinum Supporting Vendor

About Me

Statistics

Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 04-18-2019 06:30 PM
  • Member Since: 07-20-2011

Friends

Showing Friends 1 to 10 of 12

Visitor Messages

Showing Visitor Messages 1 to 7 of 7
  1. marathon
    01-07-2015 11:51 AM
    Josh, will you please let me know when the shipment to JHR in Mooresville leaves your facility. Also, since I will be running headers does that change the pulley size?
  2. 07-13-2013 05:25 PM
    Josh,

    I was looking at your numbers and I'm definitely lacking something in my tune. I have a built 2006 M6
    Vette with a built .408, stock ported heads, Dallas Performance Direct Drive with OD 8 Rib, 3.8 pulley (I think..but pretty sure), large blower cam, in-tank twin fuel pump w/KB BAP and V-3 Si trim. I'm currently sitting at 660whp w/90F ambient temps. Should be much more.

    This is the 2nd blower. A few weeks ago while on the dyno, the old V-3 Si trim cannibalized itself on the dyno. During the last pull, it made 691whp. Since we've installed the new blower, whp is way down. Any ideas I can pass on to my tuner?

    My email is [email protected]

    Thanks!
  3. Ksths2
    10-29-2012 11:57 AM
    Josh, he its Eric in Iowa, we talked on the phone last week & you wanted me to email you what we talked about with the YSI 8rib 2nd drive etc, i just wanted to make sure you got it as i've not received anything back from you. I'm not in a hurry, I just wanted to make sure you got that email. Thanks!
  4. 10-12-2012 10:58 AM
    BTW, tuner kit (ysi, 8 rib)
    Thanks!
  5. 10-12-2012 10:57 AM
    My name is Carlos Sepulveda and I'm an Air Force veteran that came back from the desert with a dream of building my C6 Z06 with a A&A S/C kit.
    I missed your sale on the corvette forum because of beeing deployed and I wanted to know how much would be your kit with a YSI and 8 rib kit upgrade (I do have a LME F/I sleeved 427 build engine)
    Thank you for you help,
    Carlos.
    787 603-3030
    2006 C6 Z06
  6. 08-03-2012 07:47 PM
    Thank you Frank for quick reply.
  7. knewblewkorvette
    05-11-2012 04:18 PM
    Hi,
    My Spec 3+ clutch is starting to slip in my 98 Corvette. I purchased the car with that clutch. My Corvette has on pump gas, dynoed at 767 hp and 640 ft. lbs torque to the wheels. I know nothing about clutchs. It is mainly a street car but could see some track time in the future. What clutch would work best for me. What other parts do I need to buy? I shopped around tranny shops in my area, Cedar Rapids Iowa, and got quotes of $600 to $1100 to install the clutch. Does that seem about right?
    Thanks for your time,
    Jay

    [email protected]
Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.