Recommendations for Tire Installers in North Jersey
#1
Melting Slicks
Thread Starter
Recommendations for Tire Installers in North Jersey
Ok, just got my Centennial Cup wheels and Michelin SS ZP tires. Now I need them mounted and balanced. I will install them on the car myself so that is not a concern. I just need a good shop that is not going to scratch these wheels. Any recommendations in North Jersey? Thanks in advance
#3
Team Owner
Not sure if the shop is still there or they still have a good reputation but when I lived in Kearny I went to a shop over the river to Belleville in the valley next to the tracks. The shop did not look like much but they had at that time great reviews on tirerack. I had them mount my new Michelin PS2 on my new rims at that time on my C5. The did a great job and no Corvette tax on their pries. I just forget the name, LOL
Last edited by Humanoid 2.0; 05-12-2017 at 02:47 PM.
#4
Melting Slicks
Thread Starter
Not sure if the shop is still there or they still have a good reputation but when I lived in Kearny I went to a shop over the river to Belleville in the valley next to the tracks. The shop did not look like much but they had at that time great reviews on tirerack. I had them mount my new Michelin PS2 on my new rims at that time on my C5. The did a great job and no Corvette tax on their pries. I just forget the name, LOL
#5
Team Owner
#6
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
The issue on the new C7 GS and Z06s, most places scratch them. They need touchless machines which are new and expensive. Hell, 3/4 of chevy dealers that sell corvettes won't even mount new tires on wheels. They are a bitch because they are 335/20 runflats. If you go into C7 Z06 section read all the horror stories and see the pics of damage. There is a new thread once a week
You have a vette atm Stephen? or any plans in near future if you dont?
You have a vette atm Stephen? or any plans in near future if you dont?
Last edited by Z0Sick6; 05-12-2017 at 03:08 PM.
The following users liked this post:
MYCoupe (05-12-2017)
#7
Team Owner
No plans until for another Vette until the kids are out of college and that will be a while, LOL
IIRC that shop had good equipment at that time that did not touch my C5 rim. Tirerack did list the equipment the shops have. Like road force balancing, etc. Look there for shop recommendations.
IIRC that shop had good equipment at that time that did not touch my C5 rim. Tirerack did list the equipment the shops have. Like road force balancing, etc. Look there for shop recommendations.
#8
Melting Slicks
Thread Starter
The issue on the new C7 GS and Z06s, most places scratch them. They need touchless machines which are new and expensive. Hell, 3/4 of chevy dealers that sell corvettes won't even mount new tires on wheels. They are a bitch because they are 335/20 runflats. If you go into C7 Z06 section read all the horror stories and see the pics of damage. There is a new thread once a week
You have a vette atm Stephen? or any plans in near future if you dont?
You have a vette atm Stephen? or any plans in near future if you dont?
#9
Team Owner
Member Since: Dec 2012
Location: Outside the Quick Stop N.J.
Posts: 30,426
Received 1,596 Likes
on
1,074 Posts
It is a little drive from where you are, but Advanced Tire & Auto on Rt 35 N in Aberdeen did a great job on my 13 GS. No scratches on the painted wheels, road force balanced, and not to expensive to boot.
The following users liked this post:
MYCoupe (05-12-2017)
#10
Team Owner
The issue on the new C7 GS and Z06s, most places scratch them. They need touchless machines which are new and expensive. Hell, 3/4 of chevy dealers that sell corvettes won't even mount new tires on wheels. They are a bitch because they are 335/20 runflats. If you go into C7 Z06 section read all the horror stories and see the pics of damage. There is a new thread once a week
You have a vette atm Stephen? or any plans in near future if you dont?
You have a vette atm Stephen? or any plans in near future if you dont?
https://www.tirerack.com/installer/I...se&saved=false
#11
Melting Slicks
Thread Starter
Thanks for the info. Yeah, that is about an hour away so hoping to find something a little closer.
#12
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
Per Tire Rack they say they use a Hunter TC3500
https://www.tirerack.com/installer/I...se&saved=false
https://www.tirerack.com/installer/I...se&saved=false
Mounting Equipment: Coats 7065EX touchless RunFlat capable
Balancing Equipment: Hunter DSP9000
That's why its expensive, touchless runflat capable.. thats what these widebody C7s need.
Last edited by Z0Sick6; 05-12-2017 at 04:29 PM.
#13
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
Or these guys: They regularly work on exotics and AMG, M, RS cars.
https://www.tirerack.com/installer/I...se&saved=false
Last edited by Z0Sick6; 05-12-2017 at 04:30 PM.
The following users liked this post:
MYCoupe (05-12-2017)
#14
Melting Slicks
Thread Starter
Dinardo in Warren NJ is what I posted above. How far is that from you? Prob 35 min with no traffic.
Or these guys: They regularly work on exotics and AMG, M, RS cars.
https://www.tirerack.com/installer/I...se&saved=false
Or these guys: They regularly work on exotics and AMG, M, RS cars.
https://www.tirerack.com/installer/I...se&saved=false
#15
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
Yeah, Warren is probably 35-40 min from me. I work in Fanwood and that's usually how long it takes me to commute. I also heard about Eurotire in Fairfield on Rt 46. I think they work on high end cars as well. Will call around and see what they tell me. I don't mind spending $200 to mount and balance as long as they don't scratch my wheels.
Just spoke to the head guy there and he said he does C7 Z06s all the time. He has 3 top of the line machines. He has all the Coats Touchless machines. They even have the APX90 which is the best mounting machine on the market.
Mounting Equipment: Coats 50x, 70x and APX90 rimclamp machines
Balancing Equipment: Coats 1250
Call them up. Tell them you spoke to Mike who called about the C7 Z06.
Last edited by Z0Sick6; 05-12-2017 at 05:35 PM.
#16
Melting Slicks
Thread Starter
I found who I am going to. Big tire shop on Rt 10 GOGEL Tire in East Hanover. I am sure you've seen their place - When you said Fairfield it dawned on me they were in EH. I am like 25 min away from there and they have experience. Tons of C7s and C7 Z06s.
Just spoke to the head guy there and he said he does C7 Z06s all the time. He has 3 top of the line machines. He has all the Coats Touchless machines. They even have the APX90 which is the best mounting machine on the market.
Mounting Equipment: Coats 50x, 70x and APX90 rimclamp machines
Balancing Equipment: Coats 1250
Call them up. Tell them you spoke to Mike who called about the C7 Z06.
Just spoke to the head guy there and he said he does C7 Z06s all the time. He has 3 top of the line machines. He has all the Coats Touchless machines. They even have the APX90 which is the best mounting machine on the market.
Mounting Equipment: Coats 50x, 70x and APX90 rimclamp machines
Balancing Equipment: Coats 1250
Call them up. Tell them you spoke to Mike who called about the C7 Z06.
The following users liked this post:
Z0Sick6 (05-12-2017)
#17
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
Good find! That's only about a half hour from me so not bad. I will call them tomorrow to get more info. I like the fact that that have top notch equipment and Corvette experience, especially with the 19/20 tire/wheel combo. Planning on getting tires mounted next Friday since I'm off from work. Will let you know how it turns out.
Let me know how it goes. I will be going for all seasons or winter tires later this year. I dont plan on letting the car sit when we get those weeks of 48-55 degrees in January and Feb