C2- C3 Tech Seminars- CT
#1
Tech Contributor
Thread Starter
C2- C3 Tech Seminars- CT
Hi Guys,
I stopped going to Carlisle, where I held tech seminars on custom building 63-82 steering boxes, trailing arms, and differentials for years so I started holding them at my home shop in CT.
We had one last Fall for the local NCRS chapter and I am thinking of opening it up to those that might be interested from the forums. You will not find this type of training anywhere else I guarantee you that. If you are interested contact me directly at gtrvette1999@gmail.com so I can see where the most interest is for a topic and get an idea on headcount. Most likely it will be a Sat morning once the weather warms up and isn't raining as much.
Gary
I stopped going to Carlisle, where I held tech seminars on custom building 63-82 steering boxes, trailing arms, and differentials for years so I started holding them at my home shop in CT.
We had one last Fall for the local NCRS chapter and I am thinking of opening it up to those that might be interested from the forums. You will not find this type of training anywhere else I guarantee you that. If you are interested contact me directly at gtrvette1999@gmail.com so I can see where the most interest is for a topic and get an idea on headcount. Most likely it will be a Sat morning once the weather warms up and isn't raining as much.
Gary
Last edited by GTR1999; 04-19-2019 at 01:00 PM.
#3
Tech Contributor
Thread Starter
Please send me an email so I can keep track and get back once I know a date.
#4
Tech Contributor
Thread Starter
The tech seminar has been scheduled for June 15th at 9:00am.
#5
Hi Gary, what is the topic going to be? Thanks.
#6
Tech Contributor
Thread Starter
I covered boxes and diffs in the past so this time it will be trailing arms.
#7
Tech Contributor
Thread Starter
TTT,
To let those who may be interested know.
To let those who may be interested know.
#8
Tech Contributor
Thread Starter
TTT for the last time.
#9
Tech Contributor
Thread Starter
Weather is going to be 80* and sunny tomorrow, see you tomorrow 9:00am.
#10
Tech Contributor
Thread Starter
Thanks for the turn out, day was perfect, information unavailable elsewhere was passed along. Good luck to those working on their cars. I may do a seminar on custom differentials in the Fall or next year. If you are interested let me know.
This thread can be closed out
This thread can be closed out