Northern California Northern California

Who has done H/C, etc. on the new LT1??

Thread Tools
 
Search this Thread
 
Old 06-29-2017, 02:14 AM
  #1  
GreekPT
Burning Brakes
Thread Starter
 
GreekPT's Avatar
 
Member Since: Sep 2005
Location: San Jose Ca
Posts: 1,230
Likes: 0
Received 3 Likes on 2 Posts

Default Who has done H/C, etc. on the new LT1??

I got rid on my 09Z which had about 630hp at the motor and am bouncing around for what's next: P-car, ACR, Z06, Grand Sport, or maybe a 720S if only AAPL can double once again. ; /

The C7Z's have that certain "overheating" issue and the Grand Sport is now many people's choice, but it needs....I need, ok WANT more power.

I know Katech makes a 700+ hp motor, but it's no way CA smog friendly.

If someone's close to Z06 power with their LT1 please please chime in and share the dirty details.

Thanks

(NOT interested in adding a supercharger)
Old 06-29-2017, 04:46 AM
  #2  
Exotica
Drifting
Support Corvetteforum!
 
Exotica's Avatar
 
Member Since: Jan 2005
Location: Santa Clara, CA
Posts: 1,904
Received 52 Likes on 22 Posts

Default

...Phil is getting the itch again!
Old 06-29-2017, 10:29 AM
  #3  
moose.b3
Drifting
 
moose.b3's Avatar
 
Member Since: Nov 2006
Location: Sierra Mtns. The Great State Of Jefferson
Posts: 1,810
Received 169 Likes on 128 Posts

Default

So you want C7Z06 power without a supercharger and be California smog friendly. Other than a nitrous oxide setup or turbos, I don't see how it can be done.
Old 06-29-2017, 01:23 PM
  #4  
lt1z
Melting Slicks
 
lt1z's Avatar
 
Member Since: Oct 2007
Posts: 2,569
Received 170 Likes on 143 Posts

Default

Have done a few. Its a bit more expensive because all the Gen V engines need a DOD delete as well as VVT phaser components and usually use a more expensive cam core with OD fuel pump lobe. You can make about 525whp on 91 octane with a H/C/I LT1 though and the tq is really good when the VVT is done right ( cam design and tuning).

Last edited by lt1z; 06-29-2017 at 01:24 PM.
The following users liked this post:
Is2scooby (06-30-2017)
Old 06-29-2017, 02:06 PM
  #5  
teddyca
Le Mans Master
 
teddyca's Avatar
 
Member Since: Jan 2006
Location: Norcal
Posts: 8,456
Received 421 Likes on 319 Posts

Default

oh oh oh me me me LOL. I made 615rwhp with a A&A kit (smog legal), meth kit, and a cat back. I was trapping 134-135 mph at the track while the fastest C7Z hit 131mph if I remember correctly. I am now going to the dark side and adding a set of long tube headers, high flow catted x pipe, 3.6 pulley, and add a second nozzle to my meth kit. I would love to see 700rwhp+ and I don't see a reason why not to.
Old 06-30-2017, 01:23 AM
  #6  
Is2scooby
Racer
 
Is2scooby's Avatar
 
Member Since: Aug 2014
Location: Rocklin California
Posts: 443
Received 47 Likes on 42 Posts
Default

Teddy, you're already too fast! How are us poor C7Z's supposed to keep up now? ;-)
Old 06-30-2017, 01:42 PM
  #7  
teddyca
Le Mans Master
 
teddyca's Avatar
 
Member Since: Jan 2006
Location: Norcal
Posts: 8,456
Received 421 Likes on 319 Posts

Default

I am by far not fast. I want to max out this car and see what it can do. It is a fun car now I wish I would have put slicks on it when we were all at the track, but to run as she did on street tires says a lot. I don't think there was another street tire car running as strong as most were all on DR's or slicks.
Old 07-03-2017, 01:10 AM
  #8  
0Quik Z06
Former Vendor
 
Quik Z06's Avatar
 
Member Since: Oct 2003
Location: Devil's Island CA
Posts: 8,479
Received 411 Likes on 280 Posts

Default

Lol, I'm in the same boat as Teddy...with a blower it's easy (and CARB legal) I made 610/548 with the 4 inch pulley on the A&A kit




Get notified of new replies

To Who has done H/C, etc. on the new LT1??




Quick Reply: Who has done H/C, etc. on the new LT1??



All times are GMT -4. The time now is 05:37 AM.