chris73cpe

So here's what's happening, 96 dodge grand caravan, recently replaced all 4 motor mounts and the oilpan gasket, nothing major. to do this I had to unplug the body control module because the harness was in the way(battery was already disconnected and out at this point).
now the car won't start(cranks strong but doesn't even try to fire), door locks, courtesy lights, headlights, etc don't work with the key off, but work fine when key is in run. Fuses look ok from what I can tell. I know a lot of these things that aren't working right go through the BCM, so I'm wondering if I blew it somehow or it just needs to get reset. Any help on this would be greatly appreciated.

Edit: I guess it wasn't the BCM I unplugged, it was whatever computer is mounted on the top passenger side fender.