Pics for Dub
#1
Instructor
Thread Starter
Pics for Dub
This is the front part of the hood surround buckled up on the drivers side
Theirs is the inner front hood surround on the drivers side
Passenger side front inner hood surround
Driver side inner skirt damage
This is up unde the nose of the hood surround, a lot of patchwork and bonding with fiberglass cloth
Theirs is the inner front hood surround on the drivers side
Passenger side front inner hood surround
Driver side inner skirt damage
This is up unde the nose of the hood surround, a lot of patchwork and bonding with fiberglass cloth
#3
Race Director
WOW...this one looks rally good in regards to some person obviously either was fixing it by themselves and did not know jack squat...or did not want to pay a person enough money to do it right.
Call me so we can go over what your intentions are now with me seeing what you have.
DUB
Call me so we can go over what your intentions are now with me seeing what you have.
DUB
#6
Instructor
Thread Starter
Yes he most certainly was, and the bad thing is, he did such a good job doing it wrong that it might have taken the same amount of time to do it right lol!
#7
Le Mans Master
Member Since: Dec 2009
Location: Plano IL
Posts: 5,093
Received 1,434 Likes
on
738 Posts
C1 of Year Finalist (stock) 2019
2018 C1 of Year Finalist
I know Dub will chime in
I would remove all the old repairs first
If the bonding strips need replaced - replace them and bond them back in with Bonding Panel adhesive
Remove all the old fiberglass cloth / plastic filler, etc....
I would remove all the old repairs first
If the bonding strips need replaced - replace them and bond them back in with Bonding Panel adhesive
Remove all the old fiberglass cloth / plastic filler, etc....
#8
Instructor
Thread Starter
Yes sir, we talked about it at length yesterday, once I get to that section I’m going to break everything down into small sections, and do one thing at a time until everything is correctly done!!