View Poll Results: Results?
Under 700
10
43.48%
Over 700
8
34.78%
Kaboom
5
21.74%
Voters: 23. You may not vote on this poll
Hopefully getting to the dyno soon.
#3
Le Mans Master
#4
Le Mans Master
I voted and Thanks Kurt.... may a small asian child crawl into your wee wee at night and lay eggs!!!!
Pitman... dont you have any faith in your fellow compodre from FL????
Pitman... dont you have any faith in your fellow compodre from FL????
#5
Le Mans Master
That wasn't a Put-down on his setup ! I hope he hits 800
#7
Melting Slicks
tell me more about the motor... goin to be VERY similar to mine.
Last dyno pull i did was 615/535 but was running outta fuel @ 5500rpm so I let out. No meth, 93, 12lbs of boost.
Oh, I voted KABOOOOOMMM!!!!
Last dyno pull i did was 615/535 but was running outta fuel @ 5500rpm so I let out. No meth, 93, 12lbs of boost.
Oh, I voted KABOOOOOMMM!!!!
#8
Le Mans Master
Yeah Pickholebag..... tell us a little more here? Heads/what kinda cam, intake, exhaust, automatic trans, fab 9in rear end???
#9
Team Owner
I know what that combo made before through an automatic so I have a pretty good idea, but that was also slightly higher boost.
Probably less than 700 but just barely under it.
Probably less than 700 but just barely under it.
#11
Damn...be nice to have a few more details...
Compression ??
Heads ??
Manifold ??
1 3/4 or 1 7/8 ??
Stab in the dark....700+
iirc there are a hand full of D1 346 setups in the 750+ range.
That F1 will take a little extra hp to turn but.......
That F1 will give you wood just from the sound, theres a couple F1 guys running around hear.
Thanks....
Compression ??
Heads ??
Manifold ??
1 3/4 or 1 7/8 ??
Stab in the dark....700+
iirc there are a hand full of D1 346 setups in the 750+ range.
That F1 will take a little extra hp to turn but.......
That F1 will give you wood just from the sound, theres a couple F1 guys running around hear.
Thanks....
#12
Le Mans Master
Thread Starter
Motor specs
9.5CR
Diamond forged pistons
Manley severe duty rods
Cartek Custom 2x boosted cam
Cartek stage 4 heads
Ls6 intake manifold
Kooks 1 7/8 no cats
Yes, it will have an Alky control meth kit.
Still waiting tohear from Formato to see when he can get here for a tune.
9.5CR
Diamond forged pistons
Manley severe duty rods
Cartek Custom 2x boosted cam
Cartek stage 4 heads
Ls6 intake manifold
Kooks 1 7/8 no cats
Yes, it will have an Alky control meth kit.
Still waiting tohear from Formato to see when he can get here for a tune.
#13
Le Mans Master
Thread Starter
#14
Le Mans Master
Dynos are just a tuning tool, with that setup you should be running into the 9's. What sort of times are you expecting to run? That will be the true test of your usefull HP
Best of luck with the new setup!
Best of luck with the new setup!
#15
Le Mans Master
Thread Starter
Don't have a goal set at the drag strip. I would like to do 200 in the standing mile though.
#16
Damn thats going to be great combo....and I'm assuming you can drive the thing by the look of your avatar.
I'm super jealous....mines still a several weeks out from going to the tuner .
Here's some internet inspiation to get it to the track;
http://www.youtube.com/watch?v=UXdiKRdKPns
Some local guys, went to go watch some friends....and you wonder why my s**ts not together yet .
I'm super jealous....mines still a several weeks out from going to the tuner .
Here's some internet inspiation to get it to the track;
http://www.youtube.com/watch?v=UXdiKRdKPns
Some local guys, went to go watch some friends....and you wonder why my s**ts not together yet .
Last edited by LSOHOLIC; 08-16-2011 at 11:32 PM.
#17
Le Mans Master
Thread Starter
#19
Le Mans Master
Note to self:
Fartpipe heads cam M6 C5- 10.8's at 130mph-faster than Pickolbag to date
Fartpipe stock C6Z on DR's 11.09 at 126mph-faster than Winkybag to date
Fartpipe Bolt ons only C6Z 10.34 at 134mph-way faster than Stinkybug to date and future
Heres a interesting thought Nicky..... who will run 10's first. Me in a cam only 2002 Fbody 6spd or you in your combo? Times a ticking... started mine up this weekend. Gotta finish up a few things and then off to JEREMY FORMATTO that will be up here next week instead of tuning your junk in his own home town area Florida. Go figure
P.S. i still love you!
Fartpipe heads cam M6 C5- 10.8's at 130mph-faster than Pickolbag to date
Fartpipe stock C6Z on DR's 11.09 at 126mph-faster than Winkybag to date
Fartpipe Bolt ons only C6Z 10.34 at 134mph-way faster than Stinkybug to date and future
Heres a interesting thought Nicky..... who will run 10's first. Me in a cam only 2002 Fbody 6spd or you in your combo? Times a ticking... started mine up this weekend. Gotta finish up a few things and then off to JEREMY FORMATTO that will be up here next week instead of tuning your junk in his own home town area Florida. Go figure
P.S. i still love you!
#20
Le Mans Master
Thread Starter
Note to self:
Fartpipe heads cam M6 C5- 10.8's at 130mph-faster than Pickolbag to date
Fartpipe stock C6Z on DR's 11.09 at 126mph-faster than Winkybag to date
Fartpipe Bolt ons only C6Z 10.34 at 134mph-way faster than Stinkybug to date and future
Heres a interesting thought Nicky..... who will run 10's first. Me in a cam only 2002 Fbody 6spd or you in your combo? Times a ticking... started mine up this weekend. Gotta finish up a few things and then off to JEREMY FORMATTO that will be up here next week instead of tuning your junk in his own home town area Florida. Go figure
P.S. i still love you!
Fartpipe heads cam M6 C5- 10.8's at 130mph-faster than Pickolbag to date
Fartpipe stock C6Z on DR's 11.09 at 126mph-faster than Winkybag to date
Fartpipe Bolt ons only C6Z 10.34 at 134mph-way faster than Stinkybug to date and future
Heres a interesting thought Nicky..... who will run 10's first. Me in a cam only 2002 Fbody 6spd or you in your combo? Times a ticking... started mine up this weekend. Gotta finish up a few things and then off to JEREMY FORMATTO that will be up here next week instead of tuning your junk in his own home town area Florida. Go figure
P.S. i still love you!
PS-When are you making that trip to Florida?