New Best!!.....C5Z....10.65 @ 137.7
#1
Racer
Thread Starter
Video added*** New Best!!.....C5Z....10.65 @ 137.7
Went to a track rental today at Atco Raceway
run down of my setup..
01 Z06, A&A vortech SQ kit (10lbs), Jam Cam, LG headers,Corsa Extreme, McLeod RXT w/ AL flywheel. 17"(y2k wheels) Hoosier DRs, gto spares w/ Moroso front runners...tuned by HorsePower Addicts (HPA)
Stock weight*
630rwhp 532rwtq
DA was -293'
I made a total of 5 passes, due to 3rd gear taking a **** lol
1st pass.... 2.167 60', 7.501 @ 101.58, 11.206 @ 135.97
2nd pass....1.821 60', 7.080 @ 102.64, 10.759 @ 136.69
3rd pass....1.892 60', 7.207 @ 102.64, 10.903 @ 136.28
4th pass....1.900 60', 7.178 @ 103.53, 10.847 @136.73
new best!
60'... 1.798
330'...4.700
1/8....7.010
MPH... 104.01
1000'...9.000
1/4.... 10.655
MPH.... 137.71
today was my 3rd trip to the track with this car and 1st trip on this current setup....
YES I KNOW ABOUT THE 60'..... i have 12 passes total in the car
quick thank yous to HorsePower Addicts for the great combo and tune, and Gary (Gary2004z06)
-Brandon
video coming soon*
run down of my setup..
01 Z06, A&A vortech SQ kit (10lbs), Jam Cam, LG headers,Corsa Extreme, McLeod RXT w/ AL flywheel. 17"(y2k wheels) Hoosier DRs, gto spares w/ Moroso front runners...tuned by HorsePower Addicts (HPA)
Stock weight*
630rwhp 532rwtq
DA was -293'
I made a total of 5 passes, due to 3rd gear taking a **** lol
1st pass.... 2.167 60', 7.501 @ 101.58, 11.206 @ 135.97
2nd pass....1.821 60', 7.080 @ 102.64, 10.759 @ 136.69
3rd pass....1.892 60', 7.207 @ 102.64, 10.903 @ 136.28
4th pass....1.900 60', 7.178 @ 103.53, 10.847 @136.73
new best!
60'... 1.798
330'...4.700
1/8....7.010
MPH... 104.01
1000'...9.000
1/4.... 10.655
MPH.... 137.71
today was my 3rd trip to the track with this car and 1st trip on this current setup....
YES I KNOW ABOUT THE 60'..... i have 12 passes total in the car
quick thank yous to HorsePower Addicts for the great combo and tune, and Gary (Gary2004z06)
-Brandon
video coming soon*
Last edited by Demonicbird00; 11-16-2016 at 06:46 PM.
#7
Good runs.
We have similar setups and similar HP on paper. I dont have the Jam Cam.
I'm trapping 105.2 mph in the 1/8th but only 132.7 in the 1/4.
I think your HP is underestimated with that 137 trap speed.
Oh, and have you replaced the clutches/springs in your rear diff? One of your burnouts only had the left side spinning for a bit.
EDIT #2 - that run is good for the #6 spot on the c5 1/4 mile manual quick list. I notice they wouldnt let you join the list for 346 plus power adder, but the manual quick list includes Z06's too.
We have similar setups and similar HP on paper. I dont have the Jam Cam.
I'm trapping 105.2 mph in the 1/8th but only 132.7 in the 1/4.
I think your HP is underestimated with that 137 trap speed.
Oh, and have you replaced the clutches/springs in your rear diff? One of your burnouts only had the left side spinning for a bit.
EDIT #2 - that run is good for the #6 spot on the c5 1/4 mile manual quick list. I notice they wouldnt let you join the list for 346 plus power adder, but the manual quick list includes Z06's too.
Last edited by TX Z06 02; 11-17-2016 at 09:08 AM.
#8
Melting Slicks
Good runs.
We have similar setups and similar HP on paper. I dont have the Jam Cam.
I'm trapping 105.2 mph in the 1/8th but only 132.7 in the 1/4.
I think your HP is underestimated with that 137 trap speed.
Oh, and have you replaced the clutches/springs in your rear diff? One of your burnouts only had the left side spinning for a bit.
EDIT #2 - that run is good for the #6 spot on the c5 1/4 mile manual quick list. I notice they wouldnt let you join the list for 346 plus power adder, but the manual quick list includes Z06's too.
We have similar setups and similar HP on paper. I dont have the Jam Cam.
I'm trapping 105.2 mph in the 1/8th but only 132.7 in the 1/4.
I think your HP is underestimated with that 137 trap speed.
Oh, and have you replaced the clutches/springs in your rear diff? One of your burnouts only had the left side spinning for a bit.
EDIT #2 - that run is good for the #6 spot on the c5 1/4 mile manual quick list. I notice they wouldnt let you join the list for 346 plus power adder, but the manual quick list includes Z06's too.
My car put down 638rwhp and traps 132mph like yours. Also a similar setup with AA V3 SI, 12#, full exhaust, SC2 blower cam, 93 pump gas.
#9
https://www.corvetteforum.com/forums...rs-inside.html
#10
Melting Slicks
I just remembered he posted yesterday with updated dyno results. He has 679. That makes more sense.
https://www.corvetteforum.com/forums...rs-inside.html
https://www.corvetteforum.com/forums...rs-inside.html
#11
Racer
Thread Starter
yea I ran 137.7 with 630rwhp
new numbers from last week are 680rwhp but I added a 3.4 pulley which puts me at 12lbs and an Alky Control unit....
Also I installed a built Trans, and the Differential is built now also....
Thank you for the Props guys!
I'm hoping tomorrow at the rental I'll be in the 141mph range, and in the 1.5-1.6 60'
I'll submit my info for the manual list!
-brandon
new numbers from last week are 680rwhp but I added a 3.4 pulley which puts me at 12lbs and an Alky Control unit....
Also I installed a built Trans, and the Differential is built now also....
Thank you for the Props guys!
I'm hoping tomorrow at the rental I'll be in the 141mph range, and in the 1.5-1.6 60'
I'll submit my info for the manual list!
-brandon
#12
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
10 sec is a fast street car regardless of dyno #
Theres more in it if youre willing sure you already know that.
Theres more in it if youre willing sure you already know that.
#16
Le Mans Master
Member Since: Nov 2005
Location: Kendall Park NJ
Posts: 6,964
Likes: 0
Received 335 Likes
on
247 Posts
You should have grabbed me though. Thinking could have easily gotten you into the mid 1.5s. I think I caught one of your passes and noticed that you were basically walking it out. A faster throttle squeeze is the ticket. I have one more rental this year on December second if you would like to attend.
#17
Racer
Thread Starter
Thanks Gary! And thank you again for letting me attend! You guys definitely put on a great event! Kudos!
Yea I'd love to attend the Dec rental! I really want a 9sec pass now...And I think 1.5s will get me there. I'm very happy with how well the Hoosier Dr's are hooking on a well prepped track
-brandon
Yea I'd love to attend the Dec rental! I really want a 9sec pass now...And I think 1.5s will get me there. I'm very happy with how well the Hoosier Dr's are hooking on a well prepped track
-brandon