First time out with drag radials video inside
#1
First time out with drag radials video inside
I'm new to the M6 and so use to an auto it's was a learning night. This was my second time to the track in my Z. I hot lapped it non stop and got 12 passes in 1.75 hours. This was my last run of the night the temp was 65 degrees.
Time slip 10/28/16<br/>
Time slip 10/28/16<br/>
Last edited by Klez; 11-06-2016 at 01:43 PM. Reason: added time slip
The following users liked this post:
Klez (11-13-2016)
#4
Racer
I'm new to the M6 and so use to an auto it's was a learning night. This was my second time to the track in my Z. I hot lapped it non stop and got 12 passes in 1.75 hours. This was my last run of the night the temp was 65 degrees.
https://youtu.be/dXnuWFQm9F8
Time slip 10/28/16<br/>
https://youtu.be/dXnuWFQm9F8
Time slip 10/28/16<br/>
#5
Sorry, got a little busy. All the mods are listed in the YT video.
AFR heads, ECS Big NA Cam, Kooks headers & pipes, Stock Ti mufflers, Haltech intake, LS2 throttle body, FAST intake manifold and a conservative tune (was an HPDE car) 485hp at the wheels.
#6
Racer
very nice!! What clutch do you have? I'm at the strip right now and my stock clutch is absolute garbage. I think I might replace this before I do any mods. So disappointing.
#7
#8
Racer
Have you done anything to your rear end like hardened shafts or a diff brace?
#14
Melting Slicks
my car is H/C/I last time out i was trapping 120/122mph car was making 475hp 415tq rear wheel
thats a nice pass get your 60ft down and you might be able to pull of a 10.9x - 11.00, was the car bogging on take off? cant tell if that was you or the other car
thats a nice pass get your 60ft down and you might be able to pull of a 10.9x - 11.00, was the car bogging on take off? cant tell if that was you or the other car
Last edited by Stroker87; 11-23-2016 at 02:20 PM.
#15
Pro
That's surprising. I'm seeing C5Z's here trapping 118-119 with headers, CAI and a tune on Hoosier DR's.
#16
Melting Slicks
best run todate 11.21 @ 121.xx 1.50 sixty ft, car had more in it but i didnt want to brake any thing
#17
Pro
thats high for a bolt'on car, my car when it was just bolt'on was 115-116mph, also my 120-122 was on my bias ply et street witch i was told bias ply's lower your mph and my car has a 3.73 gear
best run todate 11.21 @ 121.xx 1.50 sixty ft, car had more in it but i didnt want to brake any thing
best run todate 11.21 @ 121.xx 1.50 sixty ft, car had more in it but i didnt want to brake any thing
#18
Melting Slicks
sorry to the OP for side tracking your post
#19
And yes I was bogging on the launch. Didn't want to drive to the track with the front GTO wheels on. Also I had to start driving around the water box due to the front wheels putting water on the track causing me to spin. I trapped 125mph on one run because of spinning so bad.
#20
Melting Slicks
thats hurting your time, next time try a little higher rpm launch
i'm still learning my car too! i only have about 12 passes on in two track outings. I was consistent tho i made 5 passed last time out and 3 runs was 11.2x the other 2 was 11.4x all my 60's was 1.50 to 1.65
Scotty2000SS another thing is those guys at the top of the list do a lot of planing and most made runs in killer -DA at tracks like MIR mine was just a local track last minute thing +DA weather i'm sure i can do better just need seat time
i'm still learning my car too! i only have about 12 passes on in two track outings. I was consistent tho i made 5 passed last time out and 3 runs was 11.2x the other 2 was 11.4x all my 60's was 1.50 to 1.65
Scotty2000SS another thing is those guys at the top of the list do a lot of planing and most made runs in killer -DA at tracks like MIR mine was just a local track last minute thing +DA weather i'm sure i can do better just need seat time