When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm new to the M6 and so use to an auto it's was a learning night. This was my second time to the track in my Z. I hot lapped it non stop and got 12 passes in 1.75 hours. This was my last run of the night the temp was 65 degrees.
I'm new to the M6 and so use to an auto it's was a learning night. This was my second time to the track in my Z. I hot lapped it non stop and got 12 passes in 1.75 hours. This was my last run of the night the temp was 65 degrees.
Those are great times!! What mods other than the DR's are done to your Z?
Sorry, got a little busy. All the mods are listed in the YT video.
AFR heads, ECS Big NA Cam, Kooks headers & pipes, Stock Ti mufflers, Haltech intake, LS2 throttle body, FAST intake manifold and a conservative tune (was an HPDE car) 485hp at the wheels.
Sorry, got a little busy. All the mods are listed in the YT video.
AFR heads, ECS Big NA Cam, Kooks headers & pipes, Stock Ti mufflers, Haltech intake, LS2 throttle body, FAST intake manifold and a conservative tune (was an HPDE car) 485hp at the wheels.
very nice!! What clutch do you have? I'm at the strip right now and my stock clutch is absolute garbage. I think I might replace this before I do any mods. So disappointing.
very nice!! What clutch do you have? I'm at the strip right now and my stock clutch is absolute garbage. I think I might replace this before I do any mods. So disappointing.
RPS twin carbon, more of a road race on off clutch. Wish I could go, have fun at the track
my car is H/C/I last time out i was trapping 120/122mph car was making 475hp 415tq rear wheel
thats a nice pass get your 60ft down and you might be able to pull of a 10.9x - 11.00, was the car bogging on take off? cant tell if that was you or the other car
my car is H/C/I last time out i was trapping 120/122mph car was making 475hp 415tq rear wheel
thats a nice pass get your 60ft down and you might be able to pull of a 10.9x - 11.00, was the car bogging on take off? cant tell if that was you or the other car
That's surprising. I'm seeing C5Z's here trapping 118-119 with headers, CAI and a tune on Hoosier DR's.
That's surprising. I'm seeing C5Z's here trapping 118-119 with headers, CAI and a tune on Hoosier DR's.
thats high for a bolt'on car, my car when it was just bolt'on was 115-116mph, also my 120-122 was on my bias ply et street witch i was told bias ply's lower your mph and my car has a 3.73 gear
best run todate 11.21 @ 121.xx 1.50 sixty ft, car had more in it but i didnt want to brake any thing
thats high for a bolt'on car, my car when it was just bolt'on was 115-116mph, also my 120-122 was on my bias ply et street witch i was told bias ply's lower your mph and my car has a 3.73 gear
best run todate 11.21 @ 121.xx 1.50 sixty ft, car had more in it but i didnt want to brake any thing
I don't think that's high at all. Tell that to GaryZ06 or most of the guys in the top 10 fast list. Truth is most people don't dial it in when it's bolt ons and the rest of the set up suffers.
Truth is most people don't dial it in when it's bolt ons and the rest of the set up suffers.
i'm sure that's possible, i'm just your average guy looking to have some fun learning as i go. i have not touched my suspension other then lowering the ride height an inch
my car is H/C/I last time out i was trapping 120/122mph car was making 475hp 415tq rear wheel
thats a nice pass get your 60ft down and you might be able to pull of a 10.9x - 11.00, was the car bogging on take off? cant tell if that was you or the other car
Mine is 485hp at the wheels, I forgot the tq#. That's what I was thinking about the time, but I need more practice or a driver mod.
And yes I was bogging on the launch. Didn't want to drive to the track with the front GTO wheels on. Also I had to start driving around the water box due to the front wheels putting water on the track causing me to spin. I trapped 125mph on one run because of spinning so bad.
thats hurting your time, next time try a little higher rpm launch
i'm still learning my car too! i only have about 12 passes on in two track outings. I was consistent tho i made 5 passed last time out and 3 runs was 11.2x the other 2 was 11.4x all my 60's was 1.50 to 1.65
Scotty2000SS another thing is those guys at the top of the list do a lot of planing and most made runs in killer -DA at tracks like MIR mine was just a local track last minute thing +DA weather i'm sure i can do better just need seat time
11-06-2016, 11:49 AM
First time out with drag radials video inside
