I guess you get to double post when you are impatient.
Base Line Dyno From Today
Thread Starter
Premium Supporting Vendor
Joined: Mar 2001
Posts: 5,241
Likes: 21
From: Knoxville Tennessee
Base Line Dyno From Today
Thread Starter
Premium Supporting Vendor
Joined: Mar 2001
Posts: 5,241
Likes: 21
From: Knoxville Tennessee
Originally Posted by Hool97
Solid baseline pulls, now start spending money. 
Oh I guess I forgot to mention that I ALREADY have an A&A PS1C Kit sitting on my bench
Thread Starter
Premium Supporting Vendor
Joined: Mar 2001
Posts: 5,241
Likes: 21
From: Knoxville Tennessee
Originally Posted by Hool97
Solid baseline pulls, now start spending money.
Oh I guess I forgot to mention that I ALREADY have an A&A P1SC Kit sitting on my bench
Thread Starter
Premium Supporting Vendor
Joined: Mar 2001
Posts: 5,241
Likes: 21
From: Knoxville Tennessee
Well I only made three passes.
The first was 9.18 @79... traction control on.. with a wonderful 2.4 60'
The second was 8.87@82 with a better 2.2 60'
The third was an 8.82 @85 with a 2.1 60'
The MPH is there.. just have to get my 60' down. I am sure it will be better next time with another 180HP at the rear wheels..
Need much more practice... I was happy with the MPH, I knew I was going to have traction issues with my lack of driving experience with it.
Incidentally the first pass the I ran a 9.188 and the lighting ran a 9.179 both other runs for him were an 8.99 and a 9.11... but I had him by 4-6 MPH on all of the runs. His truck made 416 at the rear wheels.
Nick
The first was 9.18 @79... traction control on.. with a wonderful 2.4 60'
The second was 8.87@82 with a better 2.2 60'
The third was an 8.82 @85 with a 2.1 60'
The MPH is there.. just have to get my 60' down. I am sure it will be better next time with another 180HP at the rear wheels..
Need much more practice... I was happy with the MPH, I knew I was going to have traction issues with my lack of driving experience with it.
Incidentally the first pass the I ran a 9.188 and the lighting ran a 9.179 both other runs for him were an 8.99 and a 9.11... but I had him by 4-6 MPH on all of the runs. His truck made 416 at the rear wheels.
Nick
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski