Originally Posted by C5Natie
(Post 1596045826)
Hey there. Was wondering how difficult the install is and if factory wires have to be cut? Thanks.
Lift up console and drill small hole. If you don't then the console will pinch the wire. Drag wire into this hole so then when console rests back down it won't pinch wire. You will never see this hole again. https://cimg8.ibsrv.net/gimg/www.cor...85ff0e0650.jpg Wiring before I neatened it up. The red connectors are the wire taps. I re-routed things a few times until I was satisfied it was clean and everything could reach where it needed. https://cimg0.ibsrv.net/gimg/www.cor...5c01f043f4.jpg All cleaned up: https://cimg6.ibsrv.net/gimg/www.cor...82e0d6cad6.jpg Done: https://cimg9.ibsrv.net/gimg/www.cor...80fa2a31ca.jpg |
Originally Posted by C5Natie
(Post 1596045826)
Hey there. Was wondering how difficult the install is and if factory wires have to be cut? Thanks.
https://auto-blip.com/support-center |
Originally Posted by Mordeth
(Post 1596045967)
Install is straightforward. I mentioned it above in an earlier post. No factory wires need to be cut. You tap into them with wire tap connectors. Directions provided are clear and accurate. Manufacturer provides support if needed. You will be laying on your back under the dash manipulating small wires. Keep that in mind depending on your age, eyes and physical condition. No prior electrical experience is required. I mounted the unit in the center console and routed the wire to the dash by tucking it under the console. I did not remove the console. The wire can literally be tucked underneath after you drill a very small hole inside the console that no one will ever see. All wires are hidden. Unit works flawlessly on the track. Is unnecessary for street use. In hind-sight I would have removed the driver's seat, which takes all of 5 minutes in order to give me more room when I was laying on my back.
Lift up console and drill small hole. If you don't then the console will pinch the wire. Drag wire into this hole so then when console rests back down it won't pinch wire. You will never see this hole again.
Originally Posted by RDP Store
(Post 1596046175)
Hello sir..........it is very easy to install. No factory wires need to be cut, the kit comes with scotchlocs that hold up really well. Below is the install instructions
https://auto-blip.com/support-center RPD, you still have them in stock? |
RDP Store's Auto-Blip special pricing of $335.oo time is running out........Get yours before the deal ends tonight at midnight.......promo code...blipsav
http://www.rdpstore.com/p-9334-auto-...auto-blip.aspx |
One more hour left for you all that want this amazing deal....$335 with our promo code: blipsav
|
1 Attachment(s)
Get 2017 pricing for only a few more weeks before the industry standard price increase hits all of in January 2018. Yes so right now RDP Store still offers 2017 pricing at our awesome 5%, 10%, 15% and 20% discount savings. PM us, Email us, or Call us anytime, weekends and evenings too, with the product you are after and we will set you up with the biggest discount we can offer. All in stock parts ship next day. All built to order orders ship within 3-7days. All special orders will be clearly and promptly updated to you our valued customer. Free shipping on all orders over $99 in the lower 48 states. Contact us today..........
http://www.rdpstore.com/ |
Originally Posted by RDP Store
(Post 1596098177)
Get 2017 pricing for only a few more weeks before the industry standard price increase hits all of in January 2018. Yes so right now RDP Store still offers 2017 pricing at our awesome 5%, 10%, 15% and 20% discount savings. PM us, Email us, or Call us anytime, weekends and evenings too, with the product you are after and we will set you up with the biggest discount we can offer. All in stock parts ship next day. All built to order orders ship within 3-7days. All special orders will be clearly and promptly updated to you our valued customer. Free shipping on all orders over $99 in the lower 48 states. Contact us today..........
http://www.rdpstore.com/ |
Originally Posted by flyloeZ06
(Post 1596106570)
Can I still get the auto blip for the $335 price?
|
Get 2017 pricing for only a few more weeks before the industry standard price increase hits all of in January 2018. Yes so right now RDP Store still offers 2017 pricing at our awesome 5%, 10%, 15% and 20% discount savings. PM us, Email us, or Call us anytime, weekends and evenings too, with the product you are after and we will set you up with the biggest discount we can offer. All in stock parts ship next day. All built to order orders ship within 3-7days. All special orders will be clearly and promptly updated to you our valued customer. Free shipping on all orders over $99 in the lower 48 states. Contact us today..........
http://www.rdpstore.com/ |
2017 is winding down so this years current pricing will not be around for long. Contact RDP Store today for savings on current 2017 pricing. Get the parts you want for less then you will ever be able to get them once 2018 gets here
|
1 Attachment(s)
I am proud to be good friends with the owner at Auto-Blip. We are offering these at a special price this holiday season at www.rdpstore.com Use this promo code to save this Christmas season, Promo Code: blipsav
|
We are good friends with the owner at Auto-Blip. We are offering these at a special price this holiday season at www.rdpstore.com Use this promo code to save this Christmas season. These will make a perfect Christmas gift for you Corvette lover in your life. Promo Code: blipsav |
Not to late to get Christmas presents under you Christmas tree this year for your car crazed family member in you life. Easy Christmas present like programmers, floor mats, Auto Blips and exhaust are easy gifts you can get for your family member. PM or call us today for any questions you may have.
www.rdpstore.com |
Last full week before Christmas. RDP Store can still get you your Christmas presents before the big day on all instock parts. Current year pricing is in effect with RDP Stores amazing discounts still available. We have Weathertech in stock, AutoBlip in stock, aFe Power in stock, Kooks Headers in stock and much more. Contact us now as the time is getting close.
http://www.rdpstore.com/default.aspx |
1 Attachment(s)
Last full week before Christmas. RDP Store can still get you your Christmas presents before the big day on all instock parts. Current year pricing is in effect with RDP Stores amazing discounts still available. We have Weathertech in stock, AutoBlip in stock, aFe Power in stock, Kooks Headers in stock and much more. Contact us now as the time is getting close.
http://www.rdpstore.com/default.aspx |
Last full week before Christmas. RDP Store can still get you your Christmas presents before the big day on all instock parts. Current year pricing is in effect with RDP Stores amazing discounts still available. We have Weathertech in stock, AutoBlip in stock, aFe Power in stock, Kooks Headers in stock and much more. Contact us now as the time is getting close.
http://www.rdpstore.com/default.aspx |
Christmas specials are still on. Get manufacture 2017 pricing still at a discount with RDP Store before the 2018 price increases hit. We are here for you through out the weekend, don't hesitate to call, pm or email.
|
Christmas specials are still on. Get manufacture 2017 pricing still at a discount with RDP Store before the 2018 price increases hit. We are here for you through out the weekend, don't hesitate to call, pm or email.
|
All times are GMT -4. The time now is 02:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands