1999 C-5 vert 480+ rwhp and torque
 

well time to sell my baby to someone who wants a ton of instant power on tap.

can see pics at this link

http://hometown.aol.com/iboomalot/

not sure fair market price was thinking 25K

has 79,000 miles but only 25K on engine and suspension mods.

I have a NEW pair of rear 295s proxi T1s for it too.

paint is in good shape.

480hp achieved how?

N2O?
SC?
Turbo?
Stroker?
Heads/cam?
Miracle?

Just figured out clicking on his name shows you a list of stuff:

http://forums.corvetteforum.com/member.php?u=22048

I'd say your price is fair. Seems like quite a nice set up. Hang in there and good luck!!!!

Awesome car for the $, someone jump on this!

Thanks for the vote of confidence :)

power is made via large displacement and plenty of bolt ons

When Ed Wright was tuning it the MAF # started dropping around 5500 rpm This is due to the older heads that are on the car.

If you want OVER 500+ rhp adding a set of 225 AFR heads should achieve this.

Car sounds like a NASCAR :D

Thanks for your interest

1999 Red Vert--->BPP Vortex and PWR. duct, 85mm MAF , 165 T-Stat, TB By-pass, 90mm TPIS TB, LSX 90mm (F.A.S.T) Intake, Speed Demons Stage III H/C,

418 CID Lunati crank / JE pistons,

TPIS 1 3/4" Long Tube Headers, BPP off road X-Pipe, B&B RPT Quad Ovals, Star carbon clutch, Z06 slave cyl., McLeod master cyl., BBP output shaft, BMR Sway Bars, Z06 brake calipers(red), Z06 chrome replica rims, Kirban Shifter, & of course a nice stereo

Got the motor running and she pulled 466tq / 472.6 rhp out the box ***whooohoo finally*** hope she keeps climbing up the HP ladder


Good luck with the sale.
Sounds like an awesome car.

The block was resleeved to a 4.080 bore with a 4" crank and the Crank has been PINNED. The motor was spinning off the balancer but that problem has been fixed.

Chris at speed demon did most of the work and knows how strong this car is.

I hate to sell it but will be replaced next yr with a C6 with another speed demons motor :D

Iam also located in Oklahoma City OK.

http://publish.hometown.aol.com/iboo...tail%20pic.jpg

http://publish.hometown.aol.com/iboo...gine%20pic.jpg

http://publish.hometown.aol.com/iboo...dash%20pic.jpg

hummmm

nice, how much are you asking??

no more offers ???

Can you send me some more info on the car i.e. stereo modifacations, problems, exterior/interior condition? Also, can you send more pictures of the car, mainly more interior pictures and some showing the condition of the paint. My email is huls2399@yahoo.com Thanks. -John

I feel a lot more comfortable knowing that FLYNLO agrees with the price. :crazy:

see what I can do pics wise. give me a day or two

Work has me working like a Dog but building a 500K a yr business takes time and money.

sorry about that I need to post some pics.

Working on getting the stereo finished I removed the system I had and replacing it with something good.

The traction system is throwing a code something about it warming up. Otherwise the car runs like beast it is.

http://publish.hometown.aol.com/iboo...mages/hood.jpg
http://publish.hometown.aol.com/iboo...te%20wheel.jpg
http://publish.hometown.aol.com/iboo...tte%20door.jpg

lowest I will go is 23.5

some asked if its still for sale


Yes it is just not worried about how fast she sells due to being a fun ride.

daily driver is just fine no problems there. Only thing is stereo needs small bit of work and traction control is throwing a warm up code but works.

Otherwise the car is in great shape.

by resleeved - does it actually have sleeves in it? or was it overbored to 4.080?
and is it manual or auto?
i'm pretty interested - am looking into financing options - as my house hasn't sold yet so i gots no money!

its got different cylinder sleeves. YOu can't just bore out a ls1 motor to that size. LS2 is 4" bore stock but LS1 was 3.92" THis is an expensive way vs using a 6.0L steel block but keeps weight the same and gives great power and reliablity.

Hope your money goes threw hate to sell her but maybe someone else can enjoy the fun I have had.

I plan on getting a C6 vert with turbo in the next 12 months anyways :D

submitted my loan paperwork - i'll take further details offline with ya