My new rotors and calipers..pics
Hey it's my turn to show my new stuff, bought the rotors from Tbyrne, great to deal with and fast shipping, bought the powder coated calipers from West Coast corvette...fast service also....took me the better part of the day, but it was fun.....and i love the look.. :cool:
http://img.photobucket.com/albums/v7...andcar0003.jpg http://img.photobucket.com/albums/v7...andcar0002.jpg http://img.photobucket.com/albums/v7...andcar0001.jpg |
:cool: :cool: :cool: :cool: :cool:
nice mod |
do they fit the z51?
|
wow, those look great. how much $$$$?
|
Those red calipers look great on your white vert. :thumbs:
Fred :flag: |
Great Pics, Great Car!!!
|
Originally Posted by Dream C-5
Those red calipers look great on your white vert. :thumbs:
Fred :flag: |
Outstanding looking mod!!! :thumbs:
I did the Baer EradiSpeeds on my F55 a couple months ago and love 'em! Your rotors and calipers look great!!! Bob :flag: Here are mine that I got from TByrne as well: http://forums.corvetteforum.com/phot...aliper-med.jpg http://forums.corvetteforum.com/phot...aliper-med.jpg |
[
1,500 US. and 5 hrs and 3 beers... :cool: QUOTE=QbnSuperman]wow, those look great. how much $$$$?[/QUOTE] |
How hard is it to change the calipers? Any special tools? Do you need to bleed the brakes?
|
wow...real sharp look!
Like both cars! JimO Erie, PA |
Great job..A++++++++++ :thumbs:
|
Originally Posted by rpoz06
How hard is it to change the calipers? Any special tools? Do you need to bleed the brakes?
Offshore says he bought the WCC powder coated calipers, so he had to take the caliper off the rotor, remove the brake line, attach the brake line to the new caliper, remount the new caliper, then bleed the brake system. No "special" tools required, just the wrenches you need to remove and replace components, which isn't hard at all. The main PITA if this is a DIY project is bleeding the brakes. Even that isn't bad if you have someone to pump the brakes, or if you have a Mityvac or Motive Power bleeder. Bob :flag: |
Considering the same set-up, but have one question - does it squeek!
Thanks
Originally Posted by beezeye
Outstanding looking mod!!! :thumbs:
I did the Baer EradiSpeeds on my F55 a couple months ago and love 'em! Your rotors and calipers look great!!! Bob :flag: Here are mine that I got from TByrne as well: http://forums.corvetteforum.com/phot...aliper-med.jpg http://forums.corvetteforum.com/phot...aliper-med.jpg |
Originally Posted by wlee013
Considering the same set-up, but have one question - does it squeek!
Thanks I think it's a great setup. Bob :flag: |
Look good!
|
:cool: :thumbs:
|
I put in new hawk's front and rear...and have a very slight squeak...it'll go away ....i hope.. :toetap:
Originally Posted by wlee013
Considering the same set-up, but have one question - does it squeek!
Thanks |
Originally Posted by beezeye
Nope!!! I have no brake squeal with the Baer Eradispeed rotors. I have the stock pads up front and Hawk street pads in the rear.
I think it's a great setup. Bob :flag: |
Thanks! Your set-up really adds to the car.
Originally Posted by beezeye
Nope!!! I have no brake squeal with the Baer Eradispeed rotors. I have the stock pads up front and Hawk street pads in the rear.
I think it's a great setup. Bob :flag: |
All times are GMT -4. The time now is 12:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands