New Member
 

Hi all. I am new to this site and would like to say hello to all you C-3 owners out there. My husband and I currently own a 1977 Corvette we like to call "Black Beauty" I would like top show you all what she looks like and if anyone knows how i can post a picv on here for all to see, it would be appreciated. Thanks and am fglad to have joined your site! :)

Go to Photobucket.com
It is free and you can upload there to post pics here.
Welcome.You will learn much here.......:)

I use Photobucket too..
 

Here is a link with how to post in the forum:
http://forums.corvetteforum.com/show...07&forum_id=31
Chris B

http://photobucket.com/albums/y297/fl_rider/

Pics
 

Hi, Thanks for the info and here is our vette.!
http://i14.photobucket.com/albums/a3...213/vette2.jpg

Easy.Open your album on photobucket.Right Click on IMG (below pic) Click "copy". Come here,open "submit reply",and right click,paste...
You can add comments to.
Rich

http://i14.photobucket.com/albums/a3...m3213/8e7e.jpg

This is another shot of the vette. We are still in the process of restoring her. I will be referring to this site often for info on how to fix certain things. Have a great day

Cool.Life begins with a C3.

WELCOME! :party:

Pics
 

Thanks for the warm welcome!

Do you have a vacuum problem or is your vette intentionally winking at me? :D ;) ;) ............Welcome! :cheers:

Welcome to the insanity! :willy: :willy: :willy:

:seeya

Vacuum problem
 

Hi, Yes, I have a vacuum problem. I have all the vacuum hoses for the vette but have not replaced them as of yet as when we bought the car, it had this problem and the vacuum lines came with it but haven't the slightest clue on where to start so i can fix it. We have already replaced the starter, alt., given it a tune-up, not to mention cleaning the top inside parts of the distributor as it would not stay alive on its own becuse it was so rusted out. It had been sitting for quite some time before we got it. I need some help on fixing the lights. Where to start is my first problem. Do I start by pulling out all the vacuum lines or what? All info is apreciated.

If the hoses are in good shape [no ozone rot] the seal on the big vacuum dashpot might be the culprit. That's the big round actuator right behind the headlamp. You can buy seals pretty reasonably from the catalogs. Be sure and get you an assembly manual while you are at it. And welcome to the forum :)

Thanks. I will check the seals on those first. Have a great day

Welcome aboard. :seeya

Welcome to the forum, you'll find the best vette folks here then any other forum on the net.

Welcome to the :party:

These guys are the best on this site :D
The advice that I have recieved from them has been great and usually right on :thumbs:
They will help you with the tech advice to get you back on the road :steering:

Have fun

:iagree: And the therapy ain't half expensive - Deep pockets !!! :ack:

Welcome too the Forum :thumbs:

:party:

WELCOME !!! :cheers: :cheers:

Is your vette winking hello to the forum?....Welcome. ;)