|
Holy highway robbery, Batman!
I was strolling through the Ecklers catalogue and noticed that the interior trim piece for the top door sil (#A8533L/R) sells for $76.99 each! and I need two of them sombiches! Cripes and Criminy, that's insane! It's just a little piece of plastic! Where can I buy these for less that $76.99 each??
|
Re: Holy highway robbery, Batman! (A)
84-96 HATCH TRIM PANEL,LH-(ABOVE HEAD) HALO Code: 621608 Price: $33.00 Quantity in Basket: none 84-96 HATCH TRIM PANEL,RH-(ABOVE HEAD) HALO Code: 628439 Price: $59.00 Quantity in Basket: none 86-88 HEADER MOLDING Code: 626104 Price: $31.00 Quantity in Basket: none 89-96 HEADER MOLDING Code: 621006 Price: $31.00 Quantity in Basket: none 84-89 PILLAR POST MOLDING, LH Code: 627447 Price: $26.00 Quantity in Basket: none 84-89 PILLAR POST MOLDING, RH Code: 628447 Price: $26.00 Quantity in Basket: none 90-96 PILLAR POST MOLDING, LH Code: 624285 Price: $31.00 Quantity in Basket: none 90-96 PILLAR POST MOLDING, RH Code: 623285 Price: $31.00 Quantity in Basket: none http://www.tld-corvette.com |
Re: Holy highway robbery, Batman! (A)
Check the prices at http://www.corvette-rubber.com. Their prices were the best when I recently replaced some weather stripping.
|
Re: Holy highway robbery, Batman! (A)
Try:
Jeff Kopp - '18carfan'. Always check with him first (assuming they are still available from GM. Even if they aren't, Jeff can sometimes find some old stock at one of the Chevy dealers). Corvette America has the highest prices, followed closely by Ecklers and Mid-Am, Corvette Central, and Zip. Next lower are Al Knoch Interiors. Below that is The Last Detail. Below them will be where Jeff always comes in. [Modified by gh86E, 7:14 PM 8/4/2001] |
Re: Holy highway robbery, Batman! (gh86E)
Yes, that's true. Jeff has the BEST prices around, although you don't necessarilly need original GM replacement parts for weatherstipping. As a matter of fact these aftermarket companies probably make GM's moldings anyway. I just had this discussion with Jeff last week. I ended up buying the generic brand from Corvette-Rubber for about $25 less... sorry Jeff!
|
Re: Holy highway robbery, Batman! (mshipon)
You're pretty fast on the replies, Sparky!
|
Re: Holy highway robbery, Batman! (gh86E)
Well I need the inner glass seals also, but what I was talking about is the top piece of the door. It's a strip of plastic. What you'd rest your arm on when hangin' it out the window, y'know?
I checked the website though and TLD has that part for $62 each where Eckler's wants $76.99 each... and seeing as how I need 2 of them: Eckler's: $153.98 TLD: $124 I save $29.98.... but STILL... I mean it's JUST PLASTIC!!! Man I wish there were more C4's in the boneyard! [MAD] <--- I'm boycotting the new mad smiley cause I liked the old one! [MAD] |
Re: Holy highway robbery, Batman! (A)
I'm looking in the latest Mid-America catalog, pg 166. 84-89 Seal, upper door panel LH/RH inner (GM) - $31.99 each.
When you buy replacement door panels, you can get them bare, or with the extra trim (which includes the inner window seal, as well as the handle and more). The additional cost is usually $40 or so. I don't see how they're asking $77 each. |
Re: Holy highway robbery, Batman!
|
Re: Holy highway robbery, Batman! (A)
Bryant, bring the price and part number from the cheapest place you can find down to Ecklers and tell them to match it. If they don't, give me a call, and I'll bi|ch slap em.
|
Re: Holy highway robbery, Batman! (Romeo Barrera)
Bryant, bring the price and part number from the cheapest place you can find down to Ecklers and tell them to match it. If they don't, give me a call, and I'll bi|ch slap em. |
Re: Holy highway robbery, Batman! (A)
What if the hot chick's there? Or would that just make it more fun... :D |
| All times are GMT -4. The time now is 07:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands